AMT Kenworth Conventional W-925 Tractor Semi Truck, 1/25, T519
Plastic Model Kit, Box Condition: Good-
$64
Original issue with the highest mold quality. This super detailed truck has over 300 pieces including many in chrome. Features full rolling chassis build up just like the real truck, complete interior cab and sleeper cab detail, one-piece tilting hood, vinyl air/hydraulic hoses, duel exhaust, fifth wheel assembly, hollow vinyl truck tires, straight or curved exhaust stacks, stock or custom rear wheel hubs, "Spicer" main 5 Speed and Auxiliary 4 Speed Transmissions, Air Ride Driver's Seat and 855 CID Turbo Charged Cummings Diesel Engine. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals.
Estes Saturn V - 43 Inch Flying Model Rocket, 2001
Multimedia Model Kit, Box Condition: Good
$95
This is the classic Estes Saturn V that is 43.25 inches high and 3.93 inches in diameter. Recommended engine is the D12-3. The kit has never been started. Most parts are still in the factory sealed bags. The few parts that were not factory sealed (large parts, body tubes) have been inventoried complete. Includes decals (still in a sealed bag with other parts) and detailed instructions.
Hobby-Time Martin XB-51 Panther - Light Bomber, 1/97, 285
Wood Model Kit, Box Condition: VG+
$34
Deluxe 1950s pre-fabricated solid wood model features 3D carved fuselage, sheets of die-cut wooden airframe and detail parts, clear canopy, plastic stand, decals and very good full-size plans and instructions. The kit has never been started. Inventoried 100% complete including color decals and all paperwork.
Vac Wings Yokosuka R2Y Keiun - Bagged, 1/72
Vacuform Model Kit, Box Condition: VG+
$19
This unique aircraft design featured two engines coupled to one propeller. The aircraft was destroyed by an American bomber attack shortly into the test flight program. This vacuform kit has the main parts in white plastic, full plans/instructions and a clear canopy. Never started and inventoried complete. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.
Revell Frigate USS United States Museum Classics Series - 36 Inches Long, 1/96, 5612
Plastic Model Kit, Box Condition: VG
$245
1982 Special Issue and the ultimate release of the classic big-scale USS United States. This model builds to 36 inches long and 27 inches high and makes a very impressive display when complete. Features genuine Mahogany Base, Brass Plated Metal Pedestals and Realistic Cloth-Like Flocked Sails. This version also has the factory painted antiqued copper hull, which is still in 'near mint' condition. Never started. All of the special packing cardboard is still present inside and 'near mint.' The black parts are still in the factory sealed bag; the brown parts have been inventoried complete. Includes sails (in 'excellent++' condition), full rigging material and instructions.
Monogram A/B-26C Invader - Plus Two Eduard PE Sets / Paragon Flap Set / (A-26C / B-26C), 1/48, 5508
Plastic Model Kit, Box Condition: Good
$95
Includes the following aftermarket sets: Eduard 48113 A-26 Interior, 48111 A-26 Exterior, Paragon 48100 Flap Set and Paragon 4899 A-26 Invader 'Pathfinder' Nose conversion kit. All are never used and complete. The actual kit is from 1993 and very nicely detailed. Features full interior with all stations represented. Optional position landing gear and bomb bay doors with detailed bay and weapons. Never started and inventoried complete with all parts and includes decals and instructions.
Monogram B-58 Hustler - SAC Supersonic Bomber, 1/48, 5704
Plastic Model Kit, Box Condition: Fair
$165
First issue dated 1985 with the best mold quality. This very large and detailed model features full cockpit with unique ejection pod, excellent gear and wheel wells, four nuclear bombs, two pod choices and opened or closed cockpit hatch. Includes paint guide and markings for the "Bendix Trophy Winner" that made the record New York to London run. Inside it has never been started and is exactly as it left the factory. The small and medium size parts that Monogram factory sealed are still in the factory sealed bags; the few large parts and clear that were never factory sealed have been inventoried complete and includes decals and instructions. Even includes original factory internal cardboard parts display in very good condition.
Tamiya Leopard A4 - Motorized For R/C (Remote Control), 1/16, 56002
Plastic Model Kit, Box Condition: NM
$625
Rare and very highly detailed model that features full motorized operation, complete engineering for R/C gear, all metal chassis and chassis parts, working metal suspension, factory-assembled dual (left and right sprockets) drive gear box with one large 540 motor, factory-assembled, pre-wire harnesses and switches (ready for plug-in operation), all required running hardware, R/C linkage (servo rods, etc.), rubber drive wheels, many metal parts, realistic individual treads, excellent scale detail and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya R/C German King Tiger Sd.Kfz.182 Ausf. B Tiger II Panzer VI Konigstiger - Motorized For Remote Control, 1/16, 56004
Plastic Model Kit, Box Condition: Exc++
$525
This legendary large-scale operating R/C model by Tamiya is highly detailed and beautifully molded. Features 360 degree servo-controlled turret rotation, servo controlled gun flashing, duralumin chassis, factory assembled metal gear box and large, powerful electric motor, metal suspension, realistic forward, reverse and turning and more. Metal parts include lower hull, inner and outer drive sprockets, idler wheels, idler tension drums, idler arms, wheel shafts, suspension housing, tension shaft, torsion sway bar and dozens and dozens more. Essentially the lower hull, complete fully functioning suspension and drive wheels are metal. The kit has never been started. The parts are still in the factory sealed bags. The two very large parts (upper and lower hull) that were never sealed are complete. With decals and instructions. Tamiya did not include the R/C equipment with the kit; it must be purchased separately.
Revell Cutty Sark with Billowing Sails and Pre-Painted Hull - Three Feet Long, 1/96, H395-1200
Plastic Model Kit, Box Condition: VG
$179
1964 issue of this classic kit that features beautiful John Steel boxart. Large and highly detailed. This is an early version of the kit with the hull factory painted copper below the waterline. The copper paint is in 'excellent' condition with only light wear. This impressive model measures 36 inches long and 22 inches high when assembled. Features highly detailed deck, deck houses, cargo holds and covers, masts, yards and booms, bilge pump, windlass, 20 crew figure, and lifeboats with oars, life preservers, anchors, metal anchor chains, figurehead, finely detailed hull, preformed ratlines and molded deadeyes, pin rails and blocks, full standing and running rigging instructions and diagrams, 35 pre-formed vac billowing sails and four types of thread in two colors for rigging. Includes draftline and transom decals. Molded in three colors. There is no assembly. NOTE: this is very minor painting. The port hull half has minor (and correct) white paint to the inside bulkhead and the outer rub lines are painted white. Quality of paint is 'very good+'. There is no other painting. The black and tan parts and the rigging material is still in the Revell factory sealed bags. The white parts were not sealed and have been inventoried complete. Includes decals in amazing 'near mint' condition, flag sheet, assembly instructions, complete rigging instructions, rat line cutting diagram and even the excellent booklet "The Cutty Sark And The Days of Sail." Even the vacuform sails are in 'very good+' condition which is rare. Please note, they are not mint. There is some wear but they are well above average.
Entex 1936 Mercedes 540K Sport Roadster or Maharaja Version, 1/16, 8501
Plastic Model Kit, Box Condition: VG+
$135
Large scale (1/16) kit is very highly detailed. Includes all optional parts needed to build the stock version (red boxart) or Maharaja roadste with dual side mount tires and long range running board fuel tanks. (yellow boxart). Molded in yellow, leather, black, silver, clear and three chrome trees and real rubber tires. Builds up with a full running chassis like the real car. Engine is detailed down to 8 separately molded spark plugs. Hood opens with real metal hinges to show engine and fully detailed compartment. Front wheels turn. Full suspension and interior detail. Rumble seat opens and closes. Passenger and driver doors are molded independently so the could be positioned opened or closed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Entex 1931 Ford Model A 2-Door Sedan, 1/16, 9014
Plastic Model Kit, Box Condition: Good++
$129
Very highly detailed, large 1/16 scale model that builds up a rolling chassis just like the actual car. Features highly detailed engine and exhaust, complete suspension, wire wheels and rubber tires, full interior with front seat backs that tilt forward, opening doors, hood that opens correctly as the real car and more. Molded in olive, silver, black and ivory with chrome parts and rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
CMK Panzerkampfwagen IV Munitionstrager fur Karlgaret, 1/35, RA002
Resin Model Kit, Box Condition: Sealed NM
$149
Very rare and still factory sealed. Very highly detailed, professional quality model made of high-definition resin and features photoetched details.
Entex Rolls-Royce Silver Cloud II - 1959 To 1962 - (ex Hubley), 1/24, 9111
Plastic Model Kit, Box Condition: Sealed Exc
$129
Still factory sealed and from the original Hubley molds. Very rare and the only injection molded model of this car in this scale. The model features full interior, some engine detail, opening hood, opening trunk, removable spare and more. This is not a high piece count kit. It is normally molded in colored plastic, clear, chrome plate and with rubber whitewall wheels.
Entex 1937 Packard Formal Sedan 12 Cylinder, 1/16, 9002
Plastic Model Kit, Box Condition: Sealed Exc+
$185
Still factory sealed and from 1978. This large 1/16 scale model has fantastic detail. It features a full rolling chassis build-up just like the actual car, complete suspension, steerable front wheels, full exhaust and engine detail (including rubber ignition wires and water hoses), full interior with opening doors, folding arm rest and opening storage compartment, dash instruments behind glass, opening trunk lid, detailed engine compartment and hood that opens like the prototype. Molded in several colors, clear and with rubber tires.
Aurora Convair F-102 Dart - (YF-102), 1/121, 290-29
Plastic Model Kit, Box Condition: Exc-
$49
1957 hardbox issue of this small scale kit with dramatic Jo Kotula box artwork. Please note that this is an earlier issue with 'Famous Fighters' in the oval border of the Aurora logo and is has the '.29' on the lower right. Nicely molded with a clear canopy, full landing gear and display stand. This is a model of the very early YF-102 prototype with the straight (non-area rule) fuselage. The kit has never been started. Inventoried 100% complete including decals and instructions. Around this time, Aurora issued a series of inexpensive (usually 29 cent) small scale kits that were designed to sell at almost any type of retail location. The line was successful and further expanded - when Aurora purchased the Comet molds, they fit in nicely with this established line.
Aurora-KB De Havilland DH-10A, 1/48, 1125-300
Plastic Model Kit, Box Condition: Good-
$42
1972 hardbox issue and an ideal builder kit. This is the modified mold issue which is a more realistic model to build. Includes terrain display base and rigging instructions. Never started. Inventoried and NOTE: missing flat clear upper windshield. This is very easy to make and I have included clear material for it. Otherwise complete with all other parts, decals and instructions present. NOTE: one part (a small wind generator) is a different color plastic. It is from an earlier issue of this same kit.
Aurora-KB Gotha G-V Collectors Series Issue - (G.V), 1/48, 1126-300
Plastic Model Kit, Box Condition: Good
$62
Dated 1972 by the 'K&B Manufacturing - Division of Aurora Products Corp.' This kit makes an excellent builder since it was revised for accuracy. Includes terrain base and full rigging instructions. Never started. It has been inventoried complete with all parts and includes decals and instructions. Please NOTE that the box has a small closed hole and tear as shown, near the middle of the box top just above the top wing.
Aurora General Patton Tank - (M46), 1/48, 301-129
Plastic Model Kit, Box Condition: NM
$89
This box is in rare, investment-grade 'Near Mint' condition. The box has like new color and gloss, four solid corners, no repairs, no tape or price tags and no marks from either, no discoloration, fading, tears or missing litho. The only flaw is edge wear, mainly near the two lower corners. This hard-to-find armor kit has John Steel hardbox artwork is dated 1963. Aurora made excellent armor kits for that time and this is no exception. In the early 1960s modeling reviewers declared them as the finest armor kits in any scale. Molded in gloss olive drab with flexible black treads. The kit has never been started. Inventoried 100% complete including decals and instructions.
Accurate Miniatures Grumman F3F-1 - (F3F1) US Navy, 1/48, 3413
Plastic Model Kit, Box Condition: Sealed Exc++
$42
Still factory sealed. Very highly detailed kit with over 75 parts. Features excellent part quality, recessed panel lines, weighted or normal tires, photoetched rigging, detailed cockpit and engine and more.