Monogram Whirlwind - 30 Inch Wingspan Pre-Fabricated Gas Powered Control Line Model, C-1
Multimedia Model Kit, Box Condition: Exc+
$450
Monogram's first aircraft model dated 1946. A very rare kit for the advanced collector. When you see this model, it's easy to see how Monogram took the modeling world by storm. The kit is highly engineered, tested and very prefabricated. The balsa body is 24 inches long and completely finished. Wings are completely finished with airfoils. The tail parts are cut to shape and the metal landing gear wire is bent to shape. All other wire parts are fully formed and it includes rubber tread wheels as well as plastic canopy and spinner and decals. The cowling is hinged to provide easy access to the engine, coil, battery and fuel tank. Includes two very large sheet of full size plans/instructions as well as sandpaper, all required hardware, printwood and more. Inside, the kit is like new. It has never been started and all cardboard dividers are intact. All small parts are still in the factory sealed bag. All other parts have been inventoried complete. The plans and decals are excellent and the even the original factory tissue packing paper is still present. The box has excellent color, four solid corners, no repairs and the original factory sealing tape on the sides and bottom tray. The box grades 'excellent+' and the only flaws are general light edge, corner and shelf wear. Postal insurance is required for this kit.
Jetco Thermic Trio - Flying Wing / Orthodox / Tail First - Three Hand-Launched Balsa Wood Gliders, SG-5
Wood Model Kit, Box Condition: Poor
$42
From the 1950s. This kit contains three small balsa gliders. All parts are die cut. Full size plans are included. These are magnificent fliers. The kits have never been started and are complete with all parts unpunched and plans.
High Planes Gloster E.28/39 Whittle (E-28 / Pioneer), 1/72, 72018
Multimedia Model Kit, Box Condition: VG++
$27
Hard-to-find limited issue kit. Features injection molded main airframe parts, cast metal nose wheel and strut and vacuform canopy. The kit has never been started. Inventoried 100% complete including decals and instructions.
Aurora Convair 990 Jet Mainliner United Air Lines, 1/107, 397-198
Plastic Model Kit, Box Condition: Exc++
$1299
Very rare kit from 1962. First and only issue. This is the largest injection molded kit ever made of the very fast Convair 990 airliner. The box has as-new color and sheen with four solid corners and no repairs. There are no price tags, tape or price tag/tape marks. The only flaw is light edge wear. The model is molded in the correct white and clear plastic, with the large clear triangle display stand and full color United decals. The kit has never been started. It has been inventoried 100% complete including all parts, decals and instructions. Decals and instructions are both flat with slight yellowing being the only flaw. NOTE: shipping insurance is required with this kit. The Convair 990 and its near sister 880 were very high performance airliners. Unfortunately they did not find favor with commercial operators. The commercial failure of the 990 caused Aurora to pull these molds from production shortly after the introduction of the kit. The 990 was a larger and faster (Mach .91) airliner than the 880, but it failed to meet it's range criteria for east to west crossings of the USA. As a result, only 37 were made. Interestingly enough, several 990s continued to be operated by private owners and NASA operated two for decades after the last one was phased out of commercial service. Only 65 880s were produced from 1959 to 1962. The aircraft was designed to be smaller and faster than the DC-8 and 707 - this market did not develop, however, and if it did it could have been served with less expensive designs.
Pegasus Messerschmitt Me-109H V1 (W.Nr. 15708), 1/72, 2015
Multimedia Model Kit, Box Condition: Exc
$34
Limited issue - one of 2000 produced. Very nicely molded fine recessed panel line injection molded main parts with excellent cast white metal details, full decals and extensive information on painting the 109H V1. The kit has never been started. Internal factory sealed bag including decals and instructions.
Phoenix Slingsby 3, 1/72, P7
Vacuform Model Kit, Box Condition: Exc
$24
Features very high quality moldings with fine recessed and raised detail and pre-shaped strut material. This kit has not been started and has been inventoried complete with all parts. Not recommended for builders who are not experienced with vacuform kits.
Aurora AT-6 Texan, 1/48, 70-69
Plastic Model Kit, Box Condition: VG+
$135
From 1956. Rare first issue of this classic kit. Has early rectangular logo "Aurora Line" logo. Molded in silver and clear plastic. Includes the correct early rectangular clear base Aurora stand, the correct instructions showing this base, and the correct early Tatem decals which Aurora issued without a stand decal. (Aurora issued stand decals with kits with the introduction of the triangular 'world' base style clear stand. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions.
Aurora Cutty Sark Clipper Ship, 1/260, 432-198
Plastic Model Kit, Box Condition: Sealed NM
$79
Still factory sealed. Nicely molded smaller scale full hull kit. Kit features molded rat lines, detailed deck and fittings, display stand and rigging instructions.
Revell Lockheed Electra II Los Angeles Dodgers 1961, 1/115, HD-255
Plastic Model Kit, Box Condition: VG++
$395
Very rare. Special issue made by Revell just for the Concessions dealer for the LA Dodgers Inc and only available through them. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.
Revell Fairchild F-27 (F27) - Lodela Issue, 1/94, H297
Plastic Model Kit, Box Condition: Sealed Mint
$99
Still factory sealed. Revell Lodela issue. This issue retained the beautiful "S" artwork. Well detailed kit includes moving rudder, flaps and elevators, rotating wheels and props, Fairchild decals and loading ramp.
Airfix Hawker Typhoon - Craftmaster Issue, 1/72, 10-39
Plastic Model Kit, Box Condition: VG-
$22
Very colorful and interesting Craftmaster artwork issue. The kit has never been started. Inventoried 100% complete including decals and instructions.
Aurora Martin B-26 Marauder, 1/46, 371-259
Plastic Model Kit, Box Condition: VG
$325
Very rare first issue from the early 1950s. When Aurora moved to the West Hempstead plant, they planned a series of very large scale bombers. All kits released up to this time had been small. Aurora's instincts were correct, and the B-26, B-25 and B-29 were a big sales success. This box art was done by Jim Cox and was only used for about one year, making it very rare. The kit has never been started and is inventoried 100% complete with the original tissue paper, all parts, large clear stand, instructions and decals. The box has very good color, four solid corners (no repairs), no fading, stains or tears and no price tags or tape (other than the factory sealing tape). It does have moderate general wear as shown, a small (3/4" x 3/8") price tag tear on the left short side, edge wear (more on the on the left than the right) and litho chips on the top long side along the edge.
Aurora Curtiss Hawk P-6E, 1/43, 116-100
Plastic Model Kit, Box Condition: Sealed Mint
$110
Still factory sealed. The kit is dated 1958, but this is obviously a later issue as the Aurora logo does not say 'Famous Fighters' in the border and has no sunburst. Due to the 100 price extension, it is most likely from 1960 or '61.
Pocher Alfa Romeo 8C-2300 Monza 1931, 1/8, K71
Multimedia Model Kit, Box Condition: Sealed Exc+
$1200
This kit is still factory sealed in the clear cello wrap but the seal has splits. Pocher made the finest automobile models ever created. The detail and working parts on these long out-of-production, big 1/8 scale kits is amazing. This kit has 1954 parts of plastic, brass, steel, leather, iron, rubber, copper and many other material. Working features include operating steering, working suspension, lights that operate from the dashboard, doors that open and close with operating door latches and handles, starting handle that operates the crankshaft, connecting rods, pistons, V-belts, Fan, dynamo and more in the engine and much more. Recommended for experienced modelers only. This is the desirable early version with the most realistic wheel construction. Each wheel is built just like a real spoke wheel with individual spokes and well over 100 parts each. Shipping insurance (and Express Mail for international customers) is required.
Revell Douglas DC-9 - KLM Dutch Royal Airlines- Japan Issue, 1/120, H718-350
Plastic Model Kit, Box Condition: Good++
$79
Rare Revell of Japan issue with colorful KLM markings. The kit has never been started. Internal factory sealed bag including decals and instructions.
IM Lockheed F-94C Starfire - Bagged, 1/56, 1
Plastic Model Kit, Box Condition: Sealed
$36
Still factory sealed. Includes color decals and instructions. This kit was initially a puzzle to me. First, the kit is not listed in any of my guides. On first inspection, it appears to be the rare Revell first mold F-94 from the one piece box with no landing gear and one-piece wings. However, it could not be - it has the rivet detail of the 2nd Revell issue- but not the split upper & lower wings and added landing gear. It has come to light that Lincoln, from Hong Kong copied the 2nd edition Revell F-94 and left off the 'details' and changed the base to the typical Lincoln base. Plastic kit production was a sideline for Lincoln, and when production ended, the molds moved to Kader, also in Hong Kong. Kader reissued the entire Lincoln line in the mid 1970s. When Kader discontinued production in the late 1970s, ATP Inc in the USA bought the remaining kits and perhaps some molds. Eventually IM obtained many Kader molds - perhaps from ATP - and this issue was made.
O-Lin Republic Seabee Amphibian, 1/48, 503
Plastic Model Kit, Box Condition: VG++++
$145
Very rare kit for the advanced collector. The Seabee was produced as a high performance sport amphibian. This is a very hard-to-fine original O-lin kit in the small box and advertisement for O-lin cement on the top. Produced in 1949 or just before. O-Lin (Olin) was founded by Paul Lindberg and a Mr. Olsen - hence the company name. Although a producer of flying models in the 1930s, O-lin produced some of the earliest American injection molded kits in the late 1940s. In 1950 the partnership may have ended, because all branding was changed to Lindberg and Paul Lindberg. Inside, the kit is as new. It is molded in high gloss light gray and has the correct decals and instructions. The kit has never been started and is inventoried complete with all parts, instructions and decals.
AMT Chevrolet Corvette ZR-1 - King of the Hill Option, 1/25, 6277
Plastic Model Kit, Box Condition: Exc
$38
Very nicely detailed kit. Features 80 parts, detailed engine and compartment, underside and suspension and interior. Has opening hood, real rubber tires and optional ZR-1 decals. Molded in white, chrome, clear, red-tinted clear and with rubber tires. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Aurora Flying Sub Test Shot - Voyage to the Bottom of the Sea (Seaview Submarine) Bagged, 1/60
Plastic Model Kit, Box Condition: Exc
$275
Very rare item for the advanced collector. This item was from the estate of Dave Cockrum, the world-famous Aurora box artist, sculpture and kit designer. However, he is even more famous for his long history with DC and Marvel Comics. When working at Aurora, Dave had access to 'The Room'. In it were test shots from almost every Aurora kit ever made; employees were welcome to come in and take a kit when they pleased. This Flying Sub came from that room. It is a rare test shot molded in the usual test shot color - white- and includes the clear parts. Although the kit is complete, it does not have a box or instructions like most all test shots.
Airmodel Me-262 B-1A/U1 Conversion, 1/72
Multimedia Model Kit, Box Condition: Exc
$5
Includes finely cast resin radar and loop antenna with vacuform canopy. Never started and complete with all parts and instructions.