Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Messerschmitt Bf-109 E-3 Spanish Civil War - (Bf109E3, 1/48, 09601

Plastic Model Kit,   Box Condition: Sealed NM

$42   

Still factory sealed and hard-to-find limited edition in Nationalist markings. Highly detailed and superbly molded with all very fine recessed panel lines. Features very highly detailed cockpit and landing gear wells, drop tank, separately molded leading edge slats and split flaps, multiple piece canopy and special decals for the Spanish Civil War.

Revell TWO BAe Harrier GR5, 1/72, 04349

Plastic Model Kit,   Box Condition: VG

$32   

SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts, decals and instructions present.

Revell US Army 105MM Howitzer with Crew, 1/40, H555-130

Plastic Model Kit,   Box Condition: Good

$48   

1967 hardbox issue from the original 'S' kit molds. Features transversing and elevating gun barrel with recoil action, rotating wheels, flexible tires and trails that fold inward for towing and extend for 'firing' configuration, 4 G.I. figures, shells, crates and detailed 'battle-ground' base. Never started. The parts and all paperwork are still in the internal factory sealed bag. Literally everything inside the box is factory sealed.

GHM Convair XC-99 USAF Transport Conversion Kit, 1/72

Vacuform Model Kit,   Box Condition: VG

$179   

The incredible one-of-a-kind giant transport was many years ahead of all the giant jumbo jets. What is even more amazing is that the only one built has an incredible active service record with the US Air Force. When outdated by the C-5A, the lone XC-99 sat neglected but basically intact for decades; it is now being restored. This is a conversion kit for the Monogram 1/72 B-36 (or the Revell re-release of the same kit, RB-36). It consists of two very large vac fuselage sections and a smaller vac sheet with the rudder, etc. Detailed instructions on the conversion are included as are full size templates for making wooden internal support so you kit will have the proper strength to hold the wings. Many photographs are included of the actual aircraft and of built models, as well as photos of the correct internal balsa structure. Never started and complete with all parts and full documentation. Please note that like most of these kits, the parts are GHM and the instructions are from the Rick's Models issue. This is perfectly fine for assembly purposes.

Gavia Westland Lysander Mk. III - RAF / Finnish Air Force, 1/48, EU10669

Plastic Model Kit,   Box Condition: VG++

$48   

Undoubtedly the finest 1/48 Lysander kit available. Very finely molded with a super-detailed interior. Has decals for two RAF and one Finnish aircraft. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Frems Aermacchi MB-339 A, 1/48, 0199FC

Plastic Model Kit,   Box Condition: Exc+

$54   

From modern, excellent molds. Features all recessed panel lines, optional parts for different variants, detailed dual cockpits with optional position canopy, opened or closed air brakes, 'up' or 'down' wing flaps, extensive load-out of weapons and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Fujimi Westland Wasp A.S. Mk.1, 1/48, FG-1-100

Plastic Model Kit,   Box Condition: Good

$52   

Large-scale kit of this 1958 Royal Navy helicopter. Features full interior, detailed engine, moving rotors, torpedo load and four-wheel landing gear configuration. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Fujimi McDonnell F-4F Phantom II - Luftwaffe 'White Milk' JG 71 (38+37) / (38+43) / (38+37) Camo, 1/72, G-7

Plastic Model Kit,   Box Condition: Exc

$36   

Very finely molded kit with all finely recessed panel detail. Features full cockpit, detailed gear wells, optional position canopy, 370 gallon drop tanks, AIM-9B Sidewinders and decals for three aircraft. NOTE: this kit has minor, 'professional' quality subassembly as follows: bulkheads, instrument panels and control sticks to cockpit floor; very small lower wing inserts #38 and #39 to lower wing. There is no other assembly. Inventoried 100% complete and includes decals and instructions.

Dynaflite Windfree Contest Glider - 99.25 Inch Wingspan R/C Glider - By Marks Models, 4305

Wood and Plastic Model Kit,   Box Condition: Good

$245   

The famous Windfree won and incredible number of soaring National and Championship awards between 1970 and 1974; too many to list here! This design features die-cut balsa and plywood parts, many factory-carved balsa parts, wood stock and covering balsa as required, clear canopy material, excellent full-size plans and and a highly detailed text instruction manual. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: unless you specify otherwise, this kit will be wrapped in brown paper and shipped without an outer box. If you choose to have it boxed, please note that in the comments during checkout. The shipping will be more than what the website calculates and we will send you an invoice for the difference.

Dynaflite Bird of Time Open Class Competition Glider - 118 Inch Wingspan R/C Sailplane - By Marks Models

Wood and Plastic Model Kit,   Box Condition: Exc

$220   

This design features die-cut balsa and plywood parts, many factory-cut balsa parts, wood stock as required, excellent full-size plans and and a highly detailed text instruction manual. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: unless you specify otherwise, this kit will be wrapped in brown paper and shipped without an outer box. If you choose to have it boxed, please note that in the comments during checkout. The shipping will be more than what the website calculates and we will send you an invoice for the difference.

Sterling Aeronca C-3 - 36 Inch Wingspan for Free Flight or R/C, A25

Wood Model Kit,   Box Condition: Sealed NM

$89   

Still factory sealed and very rare in this condition. This is a large-scale model for free flight, radio control conversion (R/C) or control line. It features die cut balsa parts, die-cut plywood parts, other wood stock as required, vacuform engine, cowling and other detail parts, completely finished scale wheels, metal and nylon hardware for the gas powered version, pre-formed metal gear struts, rubber motor, tissue, propeller, full size plans and a very large color decal sheet. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling models to be deluxe kits as they were very complete.

SIG Samurai The Slope Warrior Sailplane - 67 Inch Wingspan Glider, RC-64

Wood Model Kit,   Box Condition: Exc

$125   

This large r/c glider features a beautiful factory-built fiberglass fuselage and canopy, precision cut gray foam wing cores, top quality Sig balsa and plywood, pre-cut balsa tail surfaces, heavy duty 5/16" music wire wing rods, injection molded wing actuators made from nylon, ball links and push rods, 20 page photo-illustrated instruction book and complete hardware package. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: unless you specify otherwise, this kit will be wrapped in brown paper and shipped without an outer box. If you choose to have it boxed, please note that in the comments during checkout. The shipping will be more than what the website calculates and we will send you an invoice for the difference.

Skywave TWO IJN Chidori Torpedo Boat, 1/700, W38

Plastic Model Kit,   Box Condition: Exc

$36   

Includes two ship kits. This hard-to-find model of these WWII era torpedo boats includes two complete models, one for Chidori circa 1935 and another for Manazura in 1945 configuration. Includes all the different parts for an accurate build of each model, as these ships were modified through there service life. This is a very highly detailed waterline kit that includes extensive decals and a color painting guide for both ships on the back of the box. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Skywave LST-4151 Miura JMSDF Landing Ship Tank - Miura Class - Also With Decals And Hull Numbers for Ojika And Satsuma, 1/700, J15

Plastic Model Kit,   Box Condition: Exc+

$34   

Rare. This highly detailed waterline ship kit includes hull numbers and stern names for three different vessels of the class. Also includes the following vehicles: Type 61 Tank, Type 74 Tank, Type 90 Tank, Type 89 ICV, Type 82 Command Post and Type 73 Heavy Truck. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Comet Aeronca Chief - 54 inch Wingspan for R/C / Free Flight, 3506

Wood Model Kit,   Box Condition: Fair++

$89   

1970s large-scale model with a big 54 inch wingspan. For rubber or gas free flight or R/C (radio control). The light weight of this design makes it perfect for a super-light weight but large R/C aircraft to get around the upcoming FAA transponder and licensing requirements. Features traditional balsa wood and tissue construction, high quality printwood, factory-cut spars and stringers, balsa nose block, metal prop shaft, clear window material, fully formed wheels and thrust button, rubber motor, covering tissue, propeller and detailed full size plans with building instructions. The model has not been started. Inventoried complete with all parts and plans present. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Combrig Navarin Battleship Russia 1895, 1/700, 70107

Resin Model Kit,   Box Condition: Exc

$48   

Rare and out of production. Very highly detailed and well molded resin waterline model kit. Never started. The parts are still in the internal factory sealed bags and includes illustrated instructions. The Navarin (named after the battle of Navarino) was a pre-dreadnought battleship built for the Imperial Russian Navy.Based on the British Trafalgar-class battleship, she was built by the Galerniy Yard, St. Petersburg, laid down in 1889, launched on 20 October 1891, and completed in 1896.The ship was launched on the 64th anniversary of the battle of Navarino. The ship served as part of the Baltic fleet making a cruise to the Mediterranean Sea in 1896. The Navarin went to the Pacific in 1898 and took part in the suppression of the Boxer Rebellion in 1900. She then served in the Baltic Fleet from 1902. On the outbreak of the Russo-Japanese war she was sent out with the Second Pacific Squadron. She was sunk at the Battle of Tsushima by three torpedoes fired by Japanese destroyers. Only three sailors were rescued after four days in the water.

Comet Ercoupe - 24 Inch Wingspan Flying Balsa Airplane Model, 3407

Wood Model Kit,   Box Condition: Sealed Exc

$48   

Still factory sealed. 1970s issue that features traditional wood/tissue construction, quality print and stripwood, formed wheels, rubber motor, prop and thrust button, clear canopy material, tissue covering and detailed full size plans & building instructions. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached their peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Contrail Handley Page Halifax B Mk III / B MkIII Modified / B MkVI / C Mk VIII - Bagged, 1/48, 2

Vacuform Model Kit,   Box Condition: Sealed Exc

$85   

Rare large scale (1/48) Halifax. Features parts for all four variants, white main vacuform parts, clear canopies (still perfectly clear, not yellowed) and numerous cast metal details. Includes a paint guide and a very large sheet of colorful decals for 6 different aircraft. Never started. The metal parts are still in the factory sealed bag. All other large parts have been inventoried complete. With instructions and decals.

Tamiya Kawasaki Ki-61 Hien Tony, 1/50, MA106-200

Plastic Model Kit,   Box Condition: Good

$34   

Rare, older Tamiya Hien from the early 1970s and an excellent kit for that time. It features all very fine raised panel lines and recessed control surfaces, retractable landing gear, detailed wing gun bays with machines guns and ammunition & removable access panels, cockpit with three piece optional position canopy, working trailing edge wing flaps and elevators, rotating propeller and wheels, optional drop tanks and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya Russian SSGN Kursk - Oscar II Class Submarine, 1/700, 31906

Plastic Model Kit,   Box Condition: Exc

$12   

Highly detailed waterline kit. Never started and inventoried complete with all parts and and instructions.