Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Boeing P-12E, 1/32, 1061

Plastic Model Kit,   Box Condition: VG

Sold   

Highly detailed, large-scale 1930s fighter features full cockpit, excellent engine detail, external bomb load and more. The kit has never been started. Inventoried 100% complete including decals and instructions.

Hasegawa IJN Destroyer Yukikaze Operation Ten-Go 1945 (Koh Type) - With In-Scale TBM-3 Avenger, 1/350, Z22

Plastic Model Kit,   Box Condition: Exc

Sold   

Very finely molded and detailed full-hull model with 218 pieces. Includes a 1/350 cast metal Avenger aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Santa Maria - Columbus' Flagship, 1/90, 5627

Plastic Model Kit,   Box Condition: Good

Sold   

From 1991. Large scale model with excellent detail typical of all Revell sailing ship kits. Comes with figures, preformed sails, rigging thread, directions/rigging diagrams, and colorful markings and flags. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Trumpeter USS Lexington CV-2 - Aircraft Carrier May 1942, 1/700, 05716

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very finely molded kit and highly detailed with 519 pieces. It can be assembled full hull or waterline and features a realistic water display base, large air wing, full color painting guide, extensive decals and more.

Testors F7U-3 Cutlass - VF-124 USS Hancock / VC-3 Moffet Field / VX-3 NAO Test Station - (F7U3) - (ex Fujimi), 1/72, 345

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. This kit is from very high quality Fujimi moldings featuring all fine recessed panel lines, full cockpit, separately molded/optional position 'ailavators' and leading edge slats, opening canopy and drop tanks.

Revell The Pinta - Columbus' Voyage of Discovery, 1/90, 5631

Plastic Model Kit,   Box Condition: VG

Sold   

From 1992. Large scale model with 128 parts and excellent detail typical of all Revell sailing ship kits. Comes with preformed sails, rigging thread, directions/rigging diagrams, and colorful markings and flags. Never started. Factory sealed bag with decals and instructions.

Revell The Nina From Columbus' Voyage of Discovery, 1/90, 5630

Plastic Model Kit,   Box Condition: Good+

Sold   

From 1992. Large scale model with 118 pieces and excellent detail typical of all Revell sailing ship kits. Comes with preformed sails, rigging thread, directions/rigging diagrams, and colorful markings and flags. The kit has never been started. Most parts are still in the internal factory sealed bag; one tree Of large parts was not sealed and has been inventoried complete. With decals and instructions.

Tamiya McDonnell Douglas F-15C Eagle, 1/32, 60304

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. The finest 1/32 scale F-15 Eagle kit ever made.

Revell SS United States 'The World's Fastest Liner', 1/602, 0312

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. 1996 reissue of the classic 1950s kit. Full hull model and nicely molded for that time.

Hasegawa Lockheed P2V-7 Neptune - (P2V7), 1/72, K6

Plastic Model Kit,   Box Condition: Good

Sold   

Large and well detailed kit. Includes decals for both US Navy VP-1 or Japanese Self Defense Force. NOTE: this kit has 'near mint' quality subassembly as follow: wing halves; stabilizers halves; tip tank halves; wheel haves, jet nacelle halves; two bulkheads to cockpit floor. There is no other assembly. It has been inventoried complete with all parts and includes decals and instructions.

Glencoe Lunar Lander - (ex Lindberg Moon Ship), 1/96, 05003

Plastic Model Kit,   Box Condition: Good

Sold   

This kit is from the original 1950s molds for the famous Lindberg sci-fi classic model 'Moon Ship.' Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Otaki Lockheed C-5A Galaxy, 1/144, OT2-3-1000

Plastic Model Kit,   Box Condition: Fair-

Sold   

Early issue of this famous kit with a high gloss box and classic artwork. Features all fine, recessed panel lines, detailed landing gear and enclosed gear wells, good intake and exhaust detail for the four jet engines, clear cockpit windows and a large, extensive decal sheet. Molded in white, black and clear plastic. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The box has a tear as shown, some masking tape and smaller side tear as well as a worn bottom box tray, hence the low box grade.

Lindberg Grumman F6F Hellcat British Carrier Fighter, 1/48, 558-98

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare 1950s hardbox first issue in very good condition. Features superb Ray Gaedke artwork. Kit includes external bomb load and centerline fuel tank, pilot with seat and display stand. Molded in dark blue and clear and has Fleet Air Arm decals. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Lindberg Hawker Fury Mk1 / Curtiss P-6E Hawk / Gloster Gladiator MkII, 1/48, 918

Plastic Model Kit,   Box Condition: VG+

Sold   

SALE!! Includes all three kits in the original boxes. All three have never been started. The P-6E and Gladiator have been inventoried complete with all parts, decals and instructions present. The Fury has been inventoried and includes all plastic parts and instructions. NOTE: Fury is missing the decals.

Lindberg Junkers Ju-87 Stuka Motorized, 1/48, 3101M-150

Plastic Model Kit,   Box Condition: Good-

Sold   

1968 hardbox issue from the original 1950s molds. And ideal builder. Includes electric motor for the propeller and the batteries are stored under the stand. For that time, this was a very good kit with fine panel and rivet detail. Features crew of two and seats, separately molded rudder and flap/ailerons, four small wing load bombs and a center bomb with 'swing arm' so that it would clear the prop in a dive. This kit has never been started. The motor is still in the internally sealed factory bag and all plastic parts have been inventoried 100% complete with decals and instructions. NOTE that the box displays better than 'good-' but is graded as such because on the right short side there is a 1.2" x 1.5" piece of box missing. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Grumman TBF Avenger - With Movable Control Surfaces from the Cockpit and Motorized Prop, 1/48, 527M-198

Plastic Model Kit,   Box Condition: Good

Sold   

1950s issue of this very rare and unique action kit. Open the clear canopy and move the pilot's control stick or rudder pedals and they actually moves the wing, elevator and rudder control surfaces correctly! Also features motorized propeller, landing gear that retracts and extends, opening and closing bomb bay doors, bomb bay that includes a bomb load, sonobuoys and torpedo, detailed cockpit with all crew stations and three figures, opening crew door and canopy, torpedo cart, tow bar, tow tractor and driver, clear display stand and more. Never started. Inventoried 100% complete with all parts, decals, motor and instructions.

Monogram P-61 Black Widow - 'Snuffy Smith' or 'Husslin' Hussy' - (P-61A or P-61B), 1/48, 7546

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Early issue dated 1974 but actually from the later 1970s. High quality model features optional parts and decals & paint guide to make the A or B variants, very fine raised panel lines and recessed control surface outlines, highly detailed interior with all crew stations, optional position canopy, detailed wheel wells, removable cowl with detailed engine, optional position wing flaps and crew boarding door with stairs, rotating turret with elevating guns, optional drop tanks, 55 gallon drum, three ground crew figures and more.

Renwal The Visible Airplane Engine WASP 9 Cylinder Radial by Pratt & Whitney, 1/4, 809-14.95

Plastic Model Kit,   Box Condition: Fair

Sold   

Very rare and from the late 1950s. Very large (1/4 scale) and highly detailed model is by far the finest working visible aircraft engine ever made. Includes the electric motor, gear and battery boxes and all motorizing hardware. Transparent housings permit viewing the correctly working pistons, valves, rocker arms, connecting rods, cam and gears in action with synchronized firing of the spark plugs using red electric light bulbs. Propeller also changes pitch. It is molded in the correct clear, red, black, blue metallic and gray plastic. Inside, the kit has not been started. All cardboard inserts and lids are present and display very well as shown. The small hardware parts are still in the factory sealed envelopes. The plastic parts were never sealed and have been inventoried complete, including the instructions (in near mint condition) and even the special booklet on 'The Aircraft Engine and How It Operates.' The outer box displays slightly better than the 'fair' grade; this is because it has seen significant wear and some clear tape as shown; it is also missing a section measuring 4.5" x 3.7" on the lower long side, and it had closed splits along the seams (corners and one side) and I correctly fixed those from the inside with card stock and book binding glue. It is amazing that this kit is complete - most of these models, even if still factory tape sealed, are missing parts due to poor packing procedures. This kit must be shipped insured.

Comet A-26 Invader - 30 Inch Wingspan Flying Model, 3501-298

Wood Model Kit,   Box Condition: Fair-

Sold   

1970s stick and tissue large-scale flying model. Can be built as static, free flight or converted to electric R/C with modern light-weight components. I fondly remember building this kit in about 1974 and it looked very nice. Features several sheets of printwood, three sizes of strip wood, scale wooden propellers and hubs, plastic flying props, balsa blocks are required, fully carved and finished main & nose wheels and thrust buttons, metal stock as required, dowels as required, clear window material, full size stabilizer and nacelle to fuselage fillet patterns, window cutting patterns, insignia sheet, full size plans, instructions and tissue. Never started. It has been inventoried complete with all parts and plans. NOTE: the insignia sheet is a high-quality photocopy from an original.

Comet A-26 Invader - 30 Inch Wingspan Flying Model, 3501

Wood Model Kit,   Box Condition: Good

Sold   

1970s stick and tissue large-scale flying model. Can be built as static, free flight or converted to electric R/C with modern light-weight components. I fondly remember building this kit in about 1974 and it looked very nice. Features several sheets of printwood, three sizes of strip wood, scale wooden propellers and hubs, plastic flying props, balsa blocks are required, fully carved and finished main & nose wheels and thrust buttons, metal propeller/rubber shafts, dowels as required, clear window material, full size stabilizer and nacelle to fuselage fillet patterns, window cutting patterns, insignia sheet, full size plans, instructions and tissue. Never started. It has been inventoried complete with all parts and plans.