Merit J2F-5 Duck With Eduard PE 2 Frets Set - U.S. Navy Fleet Airphotographic Unit Atlantic 3 / Argentine naval Aviation, 1/48, 64805
Plastic Model Kit, Box Condition: Sealed NM
$62
Includes factory-sealed Eduard #49780 J2F-5 Duck Color (Factory Painted) PE Interior and Exterior Detail Set. It includes a factory painted fret, a 2nd fret which is much larger and complete instructions. The actual kit is also factory sealed. It is very well molded with all fine recessed details, excellent cockpit and more. There is a paint guide and decals for both aircraft listed.
White Wings Paper Airplanes The History Of Passenger Plane Series, AG1505
Cardstock Paper Model Kit, Box Condition: Sealed Exc
$32
Still factory sealed. This is part of a very popular series of flying gliders designed by Dr. Yasuaki Ninomiya, the Grand-Prize winner in both flight time and distance divisions at the First International Paper Airplane Contest. Includes 15 civil transport gliders including Racer 538 Wren, Racer 539 Hawk, Racer 540 Crane, Junkers F-13, Ford Tri-Motor, DH-89 M-130 China Clipper, DH-88 Comet, SE210 and more.
Eastern Express Heavy Tank KV-9, 1/35, 35088
Plastic Model Kit, Box Condition: Sealed VG
$28
Still factory sealed.
Amodel Su-15TM Flagon M - (Su-15 TM), 1/72, 7263
Plastic Model Kit, Box Condition: Good
$20
Nicely detailed with very fine recessed panel lines, good cockpit and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. Flagon M was a modification of a standard Su-15 with R13-300 engines and the new 'Typhoon M' radar. Wings and landing gear were also changed. The tests took place in 1969 and were very successful; the type became one of the main fighter-interceptors in the 1970s/80s.
Hawk Lockheed U-2 Spyplane, 1/48, 209-200
Plastic Model Kit, Box Condition: Good
$32
Dated 1962 and most likely the very first issue because it is a hardbox and has the price prefix on the kit number. This model is from the mid 1960s and the artwork is by Bill Campbell. Features a 22 inch wingspan, fine raised panel lines, 'good' cockpit with pilot, two piece canopy that can be displayed opened or closed, full landing gear and outriggers, standing pilot, optional position air brakes, optional antenna and 'sniffer' pod and more. This kit is actually the basis for the Testors U-2 variants in this same scale. Molded in a very dark blue and clear with a large orange stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box has slight crushing and heavy creases on the left side and center left as shown in the photo.
Hawk Nieuport 17 - Flip-Top Box Issue, 1/48, 706
Plastic Model Kit, Box Condition: Fair+
$39
First issue from the early 1950s in the one-piece box. Molded in high gloss yellow and black. The model has not been started. Complete with instructions and all parts. This kit is from early in this first issue, and the first kits were not issued with decals. In the 1920s through the 1940s Hawk made constant scale 1/48 aircraft kits from wood. In 1946 they added plastic injection molded kits to the line and were possibly the first injection molded kit manufacturer in the USA. When Hawk made an early jump to all-plastic kits they kept the 1/48 scale and created these new one-piece boxes with two color artwork.
Hasegawa McDonnell Douglas F-15D/DJ Eagle - USAF 12 TFS 18TFW PACAF / 32 TFS USAFE / 201Sq 2nd Air Wing JASDF / 202nd 5th AW JASDF / 203rd 2AW / 303rd 6AW - (F-15 / F-15D / F-15DJ), 1/72, K26
Plastic Model Kit, Box Condition: Exc
$22
Very finely molded and detailed model is widely considered one of if not the finest Eagle in 1/72 scale. Features all recessed panel lines, detailed dual cockpits, realistic and very detailed intake and exhausts, optional position speed brake and canopy, gear well detail, drop tanks, AIM-7 Sparrow and AIM-9 Sidewinder load-outs, extensive decals for multiple aircraft and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Airfix RAF Rescue Launch - 63 Ft British Power Boat Type 2 'Whaleback', 1/72, 05281-2
Plastic Model Kit, Box Condition: Exc
$52
From 1978 and the first issue. Very nicely detailed, large-scale, full-hull model features details for optional configurations, color schemes and decals. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Balsa USA Moonraker - 54 Inch Wingspan R/C Aircraft
Wood and Plastic Model Kit, Box Condition: VG
$135
Out-of-production and rare. Never started. Inside, the kit is exactly as it left the factory. It has been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Carl Goldberg Models The Ultimate Wing Kit - 54 Inch Wingspan, K-93
Wood Model Kit, Box Condition: Sealed Good-
$69
Still factory tape sealed. Please note that this the deluxe Carl Goldberg wing kit only for the 54 inch wingspan 'Ultimate' and not the complete aircraft kit. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Balsa USA Northstar - Land Or Seaplane 44 Inch Wingspan R/C Aircraft, 455
Wood and Plastic Model Kit, Box Condition: Sealed VG
$195
Still factory sealed and rare. This very unique design has landing gear and is also an seaplane...or it can take off and land on snow! This model can do every maneuver that a conventional model can do except spin. It will also do one maneuver that conventional models do not do - a controlled vertical descent. Features full size plans, fully formed landing gear, die-cut balsa parts, premium quality hardwood and plywood parts, quality AAA grade balsa, complete hardware package, and more. The new and revised (for this issue) 36 page instruction manual has over 150 photos and illustrations that leaves nothing to change. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Robbe Balance Motor Glider - 63 Inch Wingspan R/C Aircraft, 3173
Wood and Plastic Model Kit, Box Condition: Exc
$265
Very Rare. This is a highly prefabricated motor-glider model that includes a plastic fuselage with all necessary holds and cuttings done (down to the nose for perfectly pre-defined thrust angle), anodized aluminum tail boom, factory-built wings with main sparts of pine wood, factory-built tail feathers, electric motor and mount, 6x6" folding propeller, spinner and motor switch unit, very complete R/C hardware pack, light-weight vacuformed canopy (still factory sealed and in superb condition), extensive, full color decal (sticker) sheet and more. Never started. Inside, the kit is exactly as it left the factory. Robbe sealed most of the parts in clear bags; those parts are still factory sealed. The very few parts that were never sealed are inventoried complete. Includes all paperwork. The heavily illustrated and large instruction book is in German, English and other languages as well.
Balsa USA 30 Inch Wood Floats - For R/C Aircraft
Wood Model Kit, Box Condition: Good-
$38
This box contains a kit of two 30" long wood floats. Features die-cut wood parts, full instructions and more. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Sure Flite All Foam Floats With Fibreglassed Bottom And Spray Rails - 28 Inch Long For R/C Aircraft
Other Materials, Box Condition: Good
$36
This box contains a set of 28" long injection molded foam floats. The Bottom and Spray Rails have been fiberglassed; the total weight per pair which includes spruce spars and fly plywood attachment tabs is 8 ounces. Capacity is up to 5.5 pounds. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Gee Bee MkIV Float - 33 Inch Long Floats For R/C Aircraft
Plastic Model Kit, Box Condition: VG
$36
This box contains a set of 33" long floats that are completely assembled and ready to mount (not a kit). They will attach to any conventional landing gear or you can assembly your own strut assembly to attach them to. These floats work equally well in water or snow and can be attached and removed in less than 3 minutes; includes mounting bolts and spreader bars. Made from a very lightweight (and hollow) plastic, they are strong & durable and will not puncture in a ground landing. The plastic is paintable. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Dumas Swamp Buggy Everglades Airboat - 28 Inches Long / 10 Inch Beam / For .19 Engines, 1/8, 1501
Wood and Metal Model Kit, Box Condition: Sealed Exc
$65
Still factory sealed. This Chuck Welch design is easy-to-build and good performer. Features aircraft-grade plywood, plans, full instructions and more. NOTE: this kit was factory-packed in a very sturdy, thick and heavy cardboard box. It will be shipped simply wrapped in heavy brown paper. You can specify that it be boxed if you wish, but additional shipping charges will apply.
SIG Deweybird 1/2A Control Line Model - 22.5 inch Wingspan .049 Engine Flying Model, CL-15
Wood Model Kit, Box Condition: Sealed Exc+
$56
Still factory sealed. The popular Deweybird is an easy to build model and makes a fine first flying model kit. Can be flown as a trainer or sport flyer. Features formed landing gear, di-cut fuselage, wings & tail, formed pushrods, nylon bellcrank & hardware, decals and step by step plans.
SIG Thermal Dart - Frank Ehlings No.2 Model - 24 Inch Wingspan Rubber-Powered Free Flight Aircraft - For Beginners, FF-12
Wood Model Kit, Box Condition: Sealed VG
$20
Still factory sealed. This model is a is a perfect introduction to rubber free flight. The popular design is easy to build, forgiving and a very good flyer. It includes all parts and is stick and tissue construction but a solid motor stick.
Mania THREE Mitsubishi Type 99 Ki-53 Sonia And THREE Type 97 Ki-27 Nate, 1/72, 01-800
Plastic Model Kit, Box Condition: VG
$32
SALE!! Includes all 6 kits in the 2 boxes shown. NOTE: Sold AS-IS and not inventoried. This collector was very meticulous and of his thousands of kits that I did inventory, 95% are complete. But on these kits he cut the sprue (trees) with the part numbers still attached to each number, so the parts are loose. Because of that, I have not inventoried these kits. NOTE: he built minor sub assemblies (cockpit tubs, wing halves, etc.) to 'professional' quality. Again, these kits are sold not inventoried and AS IS hence the very low price.
Aoshima Mitsubishi Ki-67 Hiryu Peggy Bombers - Two Kits, 1/144, 4
Plastic Model Kit, Box Condition: Good+
$24
Contains two complete Peggy bombers. Very nicely detailed and features very fine raised panel lines, finely molded parts, clear windshield, side blisters, turrets & observation windows, rotating wheels & propellers and more. Includes decals for two aircraft. The model has not been started. Inventoried 100% complete with all parts, decals and instructions.