Plastic Model Kit, Box Condition: Sealed NM
$34
Still factory sealed. From 2002. Very highly detailed kit from newer tooling with 97 parts. Widely considered the finest 1/72 scale Tornado kit produced. Features all very fine recessed panel lines, very good cockpit detail, wings that swing, detailed gear wells and two piece canopy.
Plastic Model Kit, Box Condition: Exc
$40
Very highly detailed with full interior and optional position bomb bay doors with full interior and bomb load. Includes paint guide and markings for three aircraft. Never started and inventoried complete with all parts and includes decals and instructions. Please note that part F5, a small triangle (one of 4) to mount the torpedo on the bomb bay is broken, but all parts are present so you can repair it. Not used if the bomb bay is modeled closed.
Plastic Model Kit, Box Condition: VG
$34
Dated 1991 and very highly detailed. Superbly molded with 118 pieces and all very fine recessed panel lines. Features very highly detailed cockpit and landing gear wells, drop tank, bomb and rocket load-outs, two piece canopy and a very large and detailed decal sheet for three USAAF aircraft. Also includes all stripes as shown in the box art. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$22
Very highly detailed model features very fine recessed surface detail, full interior with crew stations, fully enclosed landing gear wells, optional position canopy, torpedo load and more. Includes decals for HIRYU December 7, 1941, 12th Naval Flying Group China 1940-41 and Cmdr Fuchida's aircraft on AKAGI in the Indian Ocean 1942. NOTE: this kit has very minor, 'professional' quality subassembly as follows: one seat glued to cockpit floor. There is no other assembly. Inventoried and NOTE: missing one small cylindrical cockpit part. Otherwise complete with all other parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed NM
$38
Still factory sealed but the seal has a split at the lower long top side. This model features 102 pieces, recessed panel lines, very good interior detail, full bomb bay, optional position bomb bay doors, bomb load and more.
Wood and Plastic Model Kit, Box Condition: Sealed Exc
$69
Still factory sealed. Large 1/32 scale stick and tissue model that can be built static or twin .-12 to .049 engine U-Control. Features extensive color decals, numerous plastic parts such as cockpit surround, engine nacelles and more, movable control surfaces, detailed landing gear, hinged landing gear doors and more.
Resin Model Kit, Box Condition: Sealed Exc
$16
Very high quality complete resin kit. Excellent detailed. Never started and complete with all parts. Did not come with instructions, but construction is very straight-forward.
Resin Model Kit, Box Condition: Sealed Exc
$16
Hard-to-find limited production craftsman kit. Czech Model (Czech Masters) kit are known for accuracy and fine, scale detail. Parts are cast in high definition resin and feature very fine recessed panel line detail. Kit is never started and complete. Due to the small size of some parts, these kits are recommended for the experienced model builder. Kit does not come with instructions, but assembly is very straight-forward. Decals must be furnished by the builder.
Plastic Model Kit, Box Condition: Good+
$159
This model is from about 1955/56 and is part of Strombecker's incredibly famous science fiction series released with Disney's landmark 'Man in Space' movie series. This kit is a completely transparent model of the three stage rocket and satellite. Has colorful paper inserts that go on the inside of the parts to show the interior of the missile such as liquid and solid fuel tanks, fuel system, launcher details, etc. Features launch base, three separating stages and metal 'satellite'. The paper sheet is in excellent condition. Never started. Inventoried 100% complete with all parts, color paper interior parts and instructions present.
Plastic Model Kit, Box Condition: VG
$175
Rare kit from the late 1950s. The artwork is by Cal Smith and entitled 'Tender Flight Arriving.' The model is based on Krafft Ehricke design of Convair's Astronautics Division as a 200 foot long, 600 mile-high orbiting laboratory for 4 men. The model is molded in very light blue plastic is 24 inches long when assembled. Includes a black display stand and large stand decal. Never started. Inventoried 100% complete with all parts, decals and instructions. The decals are flat and in amazing 'excellent++' condition. The instructions are 'near mint' with typical yellowing as the only significant flaw.
Wood Model Kit, Box Condition: Good+
$58
Earlier issue most likely from the late 1940s where the aircraft is labeled 'P-80' instead of the 'F-80' on later issues. StromBecker was famous for this line of precarved hardwood and plastic kits. The carving is done to the final shape. When complete it makes an impressive desk top display. Includes all hardwood factory-carved parts, clear plastic canopy, hardwood stand with metal stand arm, full decals, sandpaper, sanding stick, wood filler, Casco Powdered Casein Glue, Casein Company Wood Filler and complete instructions. Never started. 100% complete with all parts and plans.
Wood Model Kit, Box Condition: Exc
$110
StromBecker was famous for this line of precarved hardwood and plastic kits. The carving is done to the final shape and when completed it makes an impressive desk top display. Features fully carved fuselage, wings with airfoil, floats, die-cut tail feathers, small detail parts in the original envelope, sealed envelopes of Casein Glue and Wood Filler, sandpaper, detailed instructions and amazing 'near mint' condition full color decals. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Fair
$68
Highly prefabricated kit made from Solid Western Pine - not balsa wood. Makes a very impressive display model when built. Includes precut and shaped fuselage, wings, elevators, rudder and nacelles, a bag of sealed detail parts including propellers, wheels, etc, envelopes of wood filler and glue, sandpaper, detailed instructions and drawings with aircraft history and a large, colorful American Airlines decal sheet. Never started. The small parts are still in the factory sealed envelope; the parts that were never sealed are inventoried complete an it includes all paperwork. NOTE: the box is only fair. The ends are heavily taped and the tape extends onto the box top and bottom. It is graded 'fair', not collectible but an ideal builder as the parts and paperwork are all in very good condition. Before plastic kits were introduced, Strombecker was famous as the premier hardwood preshaped model manufacturer. In the 1940s and 1950s, Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are hardwood and are precarved to shape - usually only a quick sanding would finish them.
Wood and Plastic Model Kit, Box Condition: VG
$38
Strombecker was famous for this line of precarved hardwood and plastic kits. All parts are made to shape, including the fuselage, which made these kits easy to assembly and finish. The scale is not listed but has a 6.5 inch wingspan when completed. This kit also includes a clear injection molded canopy, wooden base, wire support, color decals, glue and sandpaper and a stand. When complete it makes an impressive desk top display. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Vacuform Model Kit, Box Condition: Sealed
$16
Bagged kit that is still factory sealed. Very high quality vacuform kit from about 1987. Features recessed panel line detail and raised detail were appropriate, full cockpit, optional position landing gear, prop and clear canopy. Vacuform kits are not recommended for modelers who do not have experience building them.
Plastic Model Kit, Box Condition: NM
$27
From all new, state of the art molds. Highly detailed. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Wood and Metal Model Kit, Box Condition: VG
$55
This is a Kyosho kit made and packed in Japan in the 1960s but marketed by Kayeff Inc in California. I estimate the wingspan to be about 36 inches. This is a beautiful classic kit with a high degree of prefabrication for it's day. The kit features completely precut ribs, wheel pants, firewall, elevator, rudder and many other balsa parts (thin and very thick), die-cut plywood fuselage bulkheads, formed wire main and nose landing gear, balloon tires, metal push rods (for control line linkage), a metal hardware pack that is still sealed, numerous other wood and metal parts as needed, window material, tissue covering and more. This kit has not been started. The parts are complete, with the factory sealed ones still bag sealed and many parts still wrapped with the factory Kyosho tape. NOTE: I have lost the plans to this kit. You will need to find a set of Kyosho plans to build this model.
Plastic Model Kit, Box Condition: Good
$85
NOTE: builder only, missing some parts. Please read carefully for the condition. Very nicely detailed model with over 150 injection molded and resin parts that can build one of four different aircraft: EC-135N ARIA/ALOTS, C-135B T/ARIA, EC-135N ARIA and EC-135E ARIA. Features all fine recessed panel lines, detailed interior, choice of TF-33 or J-57 engines, ALOTS pod, Black Box resin detail parts and more. The kit has never been started. Many parts are still in the internal factory sealed bags. The loose parts have been inventoried and NOTE: missing the internal O2 bottles (not seen if the door remains close) and missing ALL clear parts. Includes decals, full instructions, marking paint guide (for EC-135E ARIA and EC-135N ARIRA/ALOTS) and illustrated additional instructions for the resin parts.
Wood Model Kit, Box Condition: VG++
$129
**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a large, approximately 90% finished RC model that is truly 'Almost Ready To Fly.' Never started. Inside, everything is exactly as it left the factory. All of the parts that were factory sealed still are and the few that were never sealed have been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.
Plastic Model Kit, Box Condition: Exc++
$36
Hard-to-find kit from 1995 that is superbly molded and nicely detailed. Features good cockpit detail, pilot, optional landing skid or wheels, optional tail wheels (in flight and on ground style) and a special in-flight display stand. Includes paint guide and markings for two aircraft: prototype and production. Never started and inventoried complete with all parts and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215