Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Monogram Willy Ley Passenger Rocket, 1/192, PS47

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1996 reissue with the same box art and from the original 1950s molds. This model is one in a series of Willy Ley Space Models including the Orbital Rocket, Space Taxi and TV Orbiter. Features two separating stages, retracting landing gear, launch pad and 5 figures.

Hasegawa Messerschmitt Bf-109 G-6 - JG51 Molders - (Bf109G6), 1/48, JT156

Plastic Model Kit,   Box Condition: NM

Sold   

Hard-to-find issue dated 1998. Features excellent cockpit, optional position canopy, gear well detail, correct exhaust and filter assemblies, under wing cannons, drop tank, separately molded leading edge slat and rear split flaps and more. With markings for 4/II/JG 51 Molders and III/JG3 Udet. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

LS Mitusbishi Ki-67 Type-4 Hiryu (Peggy) - Heavy Bomber - with Ground Crew and Bomb Cart - 14th Group / 60th Group / 61st Group / 62nd Group / 74th Group / 110th Group / TO-Go (Special Attack Plane) / Hamamatsu Flying School, 1/72, 151-450

Plastic Model Kit,   Box Condition: VG

Sold   

Very high quality kit with legendary LS attention to detail. Features all fine recessed panel lines, excellent cockpit and crew station detail with crew, rotating turret with elevating gun, working bomb bay doors, full bomb load, ground bomb cart, working crew entry door, moving wing flaps and ailerons, rotating wheels and propellers, ground crew, wheel chocks and more. Includes decals and a beautiful full color painting & marking guide for 8 aircraft. There is even a full color cutaway showing interior detail. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The fact that Hasegawa still uses some LS molds testifies to their detail and accuracy.

AMT Fruehauf Model FB Beaded Panel 40 Foot Van Trailer, 1/25, T507

Plastic Model Kit,   Box Condition: Exc

Sold   

Rare original issue and hard-to-find in this condition. Has more than 100 parts and fits any of the AMT tractor models. Features fully detailed F-2 Tandem suspension, operating 'Select-A-Point" sliding suspension, air brake system with flexible lines, mud guards, rear doors that open realistically, two position support assembly either 'raised' or lowered for static display and more. Molded in white, chrome plate, red-tinted clear and with rubber tires and metal axles. Never started. The parts that were factory sealed are still in factory sealed bags. The parts that were never factory sealed (the largest trailer parts & chrome and clear) have been inventoried complete. With instructions and decals in amazing 'near mint+' condition.

Monogram Red Baron Fokker Triplane - Snap Tite Motorized Peanuts Snoopy Sopwith Camel Series, 5903

Plastic Model Kit,   Box Condition: Good++

Sold   

Very rare 1971 issue in the 'Snoopy and Red Baron' series of kits. Features large Triplane, Red Baron bust, motorized propeller and Iron Cross stand. Painting is eliminated because the model is molded in bright red, black and white plastic. NOTE: this kit has very neat 'professional' quality subassembly as follows: the wheels and tires are assembled to the axle; the tail pieces are assembled to the body. There is no other parts assembly. 90% of the decals are applied to the body and wings; the quality of application is 'adult' and is as good as you could do. The actual transfers are still in 'near mint' condition. There is no other assembly. Inventoried 100% complete with all parts, remaining decals and instructions present.

Monogram Snoopy and his Sopwith Camel - Snap Tite Motorized Model, 6779

Plastic Model Kit,   Box Condition: Poor

Sold   

Very rare 1970 issue in the 'Snoopy and Red Baron' series of kits. NOTE: Ideal builder; please read carefully for the condition. Features Snoopy, his Sopwith Camel, dog house stand, two 'thought balloons' with two sayings and motorized propeller. Needs no painting because it is molded in red, bright yellow, white and black plastic. NOTE: this kit has very neat assembly as follows: the stickers have been very neatly applied by an adult. There are in as perfect of a position as you could expect and are in 'near mint' condition. Snoopy's head is assembled; the stand arm was once glued to the base but it has come off neatly and is not broken. There is no other assembly. Inventoried 100% complete with all parts, battery contacts and motor (not tested) present as well and the instructions (which are in 'good+' condition and not stained. The box is 100% complete and intact but has bad stains as shown; it is a miracle that the decals and paperwork are not stained and in such good condition. NOTE: the propeller has one blade broken. Both parts are present and it fits back perfectly for an straight-forward repair.

Constructo Yacht Blue Goose - Highly Prefabricated 16.5 Inch Long Wooden Ship, U614

Multimedia Model Kit,   Box Condition: Good

Sold   

And excellent model of a truly beautiful ship. These early Constructo ship kits are among my all time favorite models. Highly prefabricated wood and metal kit measures 16.5 inches long and 16 inches high when assembled. Constructo kits are among the finest of all the older prefabricated wooden ship kits. Features a completely shaped and sanded hardwood hull that is ready for painting and even has predrilled mast, bowsprit, anchor chain and pedestal mounting holes, finished hardwood display stand, finished and painted bow stand pedestal and rear hull mount, mounting nails, a large sheet of heavy cardboard with dozens of completely cut and finished and numbered hardwood parts held on with string, a factory sealed bag of fully finished fittings of metal, wood and plastic, numerous other hardwood parts completely cut to shape and numbered, deadeyes and blocks, paint, wood stock as required and a complete set of sewn, ready-to-install cloth sails, black and white standing and running rigging thread, detailed text instructions in English and Spanish and a full size plan sheet with many views, complete part identifications by number and excellent rigging diagrams. The kit has never been started. The actual ship is complete with all the small parts still in the factory sealed bags or factory-tied to the display piece. Only the hull was not factory sealed. NOTE: two container of paint are missing. Otherwise complete. With full size plans and instructions. Constructo kits were made in Spain and early issues in the USA were marketed by Constructo Nautical Miniatures, Inc, New York 1. There were many series of kits issues by size; some smaller and some larger than this kit.

Lindberg Junkers JU-88 - BAGGED, 1/64, 545

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged Kit - there is no box. The box is shown for reference only. Early 1960s issue featuring detailed engines with removable cowls, retracting landing gear, movable control surfaces and full crew. Molded in green and clear. Never started. Inventoried and NOTE: missing bombardier figure and one propeller shaft. Otherwise inventoried with all other parts, clear "V" based stand, decals and instructions present. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

DML Dornier Arrow Do-335 B-6 Arrow, 1/72, 5010

Plastic Model Kit,   Box Condition: VG

Sold   

Very highly detailed model featuring 152 pieces parts and numerous photoetched details. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa McDonnell RF-101C VooDoo - 45th Camo / 45th Natural, 1/72, 037

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed and from the 1980s. Nicely molded and detailed kit for that time. Includes decals for two aircraft from the 45th, one natural metal and one camouflage.

Wingnut Wings Sopwith Snipe Early - With Decals For Five Different Aircraft, 1/32, 32020

Plastic Model Kit,   Box Condition: Exc

Sold   

Amazingly well detailed and certainly the finest injection-molded Snipe available in any scale. Never started. All of the parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya Mosquito B Mk.IV / PR Mk.IV, 1/48, 61066-2800

Plastic Model Kit,   Box Condition: Exc

Sold   

1999 issue that is very highly detailed inside and out. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Pyro 1906 Renault Towne Car, 1/32, C454-100

Plastic Model Kit,   Box Condition: Good

Sold   

1967 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of their kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box - in this case, a Renault at the Montagu Motor Museum in England. The model includes rubber tires, brass plated, blue and clear parts. Features detailed chassis, complete motor and interior and a removable hood or 'bonnet.' The kit has never been started. Inventoried 100% complete including instructions. NOTE: one roof rack is broken in two; but both parts are present and fit back together perfectly for a straight-forward repair.

Hobby Craft De Havilland DHC-3 Floatplane - SAC 4082 Command Wing USAF or Civil Ontario Ministry of Natural Resources, 1/48, HC1655

Plastic Model Kit,   Box Condition: Good-

Sold   

NOTE: kit is not mint, has two broken parts. Please read carefully for the condition. Large-scale Otter that is well molded with all recessed panel line details. Features detailed cockpit, separately molded crew entry and cargo doors, clear windows for the cockpit and sides, floats and decals for two aircraft. Never started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: right front fuselage is broken off. It fits back perfectly and there is no deformation. An easy fix. NOTE: the left rear at the rudder is split but still attached. There is slight deformation; this will be a slightly more challenging repair.

Williams Brothers Curtiss F9C Sparrowhawk From USS Akron or Macon, 1/32, 32-F9C

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Large scale (1/32) kit is nicely molded and detailed. Features full interior detail, two types of wheels and rigging material/instructions. Has decals for one of 6 different Sparrowhawks from either airship. This is the aircraft flown and maintained from the 1930s flying aircraft carriers (rigid airships) USS Macon and USS Akron.

Italeri Gotha Go-242 / Go-244 - Glider or Twin Engine Transport, 1/72, 111

Plastic Model Kit,   Box Condition: Exc

Sold   

Very well detailed kit. Builds glider or twin engine transport. Features full interior detail and opening rear cargo hatches. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

AV USK Polikarpov I-152 - Bagged, 1/72, AV1002

Plastic Model Kit,   Box Condition: Exc

Sold   

Still factory sealed. Limited edition injection molded model.

Pegasus Martinsyde F.4 Buzzard (F4 F-4) - RAF or Finnish Air Force, 1/72, 4016

Plastic Model Kit,   Box Condition: VG+

Sold   

Limited run from only 1500 kits made. Injection molded main parts with many metal details and complete decals for two aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Choroszy Spad 51C, 1/72, A153

Resin Model Kit,   Box Condition: Exc

Sold   

Very highly detailed resin kit that is very finely molded. Includes full decals and paint guide. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Assault Tank - Sturmgeschuetz IV L/48, 1/32, 8220-0300

Plastic Model Kit,   Box Condition: Good

Sold   

1972 Mattel/Monogram that is very nicely molded and detailed featuring elevating gun, working treads, bogies with spring action, extra helmets, jerry cans and tread links and a crew of two. The kit has never been started. It has been inventoried complete with all plastic parts present and includes decals and instructions. NOTE: Missing diorama instructions.