Plastic Model Kit, Box Condition: Good
$110
Rare and a very highly detailed kit. Features injection molded parts with fine recessed surface detail, dozens of resin details, very good cockpit and more. Includes decals for three aircraft. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$42
Includes two very highly detailed kits - the single seat 'C' and the two-seat 'B.' Features injection molded parts with fine recessed surface detail, high definition cast resin details and one fret of PE parts. There are at least three decal choices for each aircraft. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: missing the H.M.H. reference booklet shown on the cover.
Plastic Model Kit, Box Condition: VG++
$30
Highly detailed with an excellent cockpit and paint guide and decals for the four aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$28
Highly detailed with fine recessed panel lines, numerous photoetched and resin details, excellent cockpit, realistic intake with engine front, detailed gear wells and more.Never started. All resin and photoetched parts are still factory sealed; the injection molded parts have been inventoried complete. Includes decals and paint guide for two different aircraft and instructions.
Plastic Model Kit, Box Condition: VG+
$24
Very nicely molded kit and easily the finest Gnat in 1/72 scale. Features recessed panel lines, very good cockpit, detailed gear wells and more. Includes color paint guide and decals for all versions listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$110
From high quality Revell molds. This 1980s Entex issue of this large-scale, highly detailed, full-hull model kit measures over 19 inches long when assembled. Features movable elevating tower, bow monitor, hose outlets, fire hoses, rotating deck water guns, hose reels, radar, railings, crew, detailed wheel house, display stand, bollards, jackstaff, propellers and much more. Because of the large size of this model, many people have converted this kit to R/C operation but you need to furnish all parts for the power, hardware and radio gear (R/C equipment not included). Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good-
$30
From quality Airfix molds. The Devonshire was launched on June 10, 1960 and was the Royal Navy's first guided missile destroyer. The model features Seaslug and Seacat systems, full hull, propeller and rudder detail, very good superstructure and much more. Never started. Factory sealed bag with decals and instructions. The box would grade slightly better than 'Good-' but a previous owner cut the promotional tokens from the lower long box side.
Plastic Model Kit, Box Condition: Good+
$35
Rare 1970s three-stage solid-motor rocket kit that is 24 3/4 inches long. Flies over 2,000 feet up with a combination of 'A', 'B' or 'C' engines. Never started. It has been inventoried complete with all parts and includes decals and instructions. I always viewed this rocket as a very fancy version of Estes' three-stage 'Farside.'
Plastic Model Kit, Box Condition: Sealed NM
$48
Still factory sealed. 1982 issue includes decals for both helicopters including the most famous Sea King ever, Number 66 from the Apollo Recovery Missions. Nicely detailed model features working main and tail rotors, cockpit and interior detail including cargo deck, opening side doors, side hoist, ASW torpedoes and more.
Plastic Model Kit, Box Condition: Sealed NM
$109
Still factory sealed and in 'near mint' condition. Very rare and from the 1970s. Features big, detailed V8 engine and engine compartment, opening hood, giant off-road tires, roll bar, detailed suspension and four wheel drive, clear sun roof, spare tire, complete interior, CB radio and antenna, west coast mirrors, large colorful decal sheet and more.
Plastic Model Kit, Box Condition: Sealed Exc
$25
Still factory sealed. 1970s issue features interior detail, rotating wheels and props, drop tanks, elevating guns and rotating turret, moving ailerons, positionable spoilers and optional bomb load. This kit is from quality Airfix molds and is one of the MPC issues that include custom and USAF decals, clear prop disks for 'in flight' look and the unique clear modular display stand. Note that this issue still has 'Model Products By Craft Master' under the MPC logo. Before this, MPC was marketing Airfix kits under the Craftmaster name in the USA. This continued for several issues and was finally discontinued although MPC continued to distribute Airfix and their own models.
Plastic Model Kit, Box Condition: Good
$42
The Darracq was designed and built when France was the international center of motor vehicle excellence. While Britain, American and Germany either rejected the motorcar, showed indifference or activly fought to eliminate it, the French accepted it with open arms. As a result, the Darracq and other fine designs were the best automobiles in the world. The model is from 1975 and is a nicely molded kit of this successful early gasoline powered automobile. Never started. The parts are still in the internal factory sealed bags and includes instructions. Other kits in this series include the 1912 Ford T, 1905 Rolls Royce and 1930 Bentley
Plastic Model Kit, Box Condition: Exc
$32
Nicely detailed kit comes with decals for Police version but also includes all parts for the Navy version and torpedo weapons load. Kit features spinning main and tail rotors, cockpit and interior detail including cargo deck, opening side doors, cargo net on side hoist, and working dipping sonar assembly (when you turn the rotor, it comes out of the bay and lowers - you can raise it by turning the rotors in the opposite direction). Never started. Inventoried 100% complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: Sealed NM
$22
Still factory sealed and dates from the mid 1970s. This kit is from quality Airfix molds and is from the MPC 'Air Combat Collection', which includes ground crew. Note that this issue does not have 'Craft Master' under the MPC logo. Before this, MPC was marketing Airfix kits under the Craftmaster name in the USA. This continued for several issues and was finally discontinued (possibly with this issue) although MPC continued to distribute Airfix models.
Plastic Model Kit, Box Condition: Sealed VG+
$48
Still factory sealed. Dated 1980. Can be built stock or custom with many optional parts such as roll bar, sun roof, rear bucket seats, custom wheels, etc. Includes opening hood, detailed engine with optional turbocharger, and more. Molded in color, clear, chrome and rubber.
Plastic Model Kit, Box Condition: Sealed NM
$42
Still factory sealed. 1988 issue from the classic TV show "Knight Rider." Molded in black, chrome, clear and rubber. Great kit that is a true custom - complete with KITT interior and special body panels. Molded in black, chrome and clear with rubber tires.
Plastic Model Kit, Box Condition: Sealed NM
$28
Still factory sealed. Very nicely molded and detailed model that features very fine recessed surface detail, excellent cockpit & interior and more. Includes AeroMaster decals for the colorful box artwork aircraft.
Plastic Model Kit, Box Condition: Good-
$26
SALE!! Includes two kits in one box. Both kits are never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$24
1960s Craftmaster release with rather grisly artwork showing Stuka bullets knocking down almost everyone in sight. The kit includes a well detailed truck and trailer. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$22
Limited issue injection molded kit that is well detailed with all recessed panel lines and numerous photoetched parts on two brass frets. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. On January 10, 1945, Hitler held a conference during which the staff discussed ways that the Luftwaffe could restore a degree of air superiority. During this discussion, Hitler suggested to Goering that the 50mm cannon be installed in a '262 so that it could open fire at longer ranges with more telling results. Two different cannon were examined; the Mauser Mk214A was chosen over the Rheinmetall Borsig BK5 and was installed in Me-262 W.Nr. 111899. The aircraft made the first flight in February of 1945. The pilot, Herget, flew the craft in practice against ground targets then actually flew to operational missions against a US bomber formation. On both occasions the gun jammed. A second aircraft was built, but it likely did not fly before the end of the war. American forces captured this second aircraft (named 'Wilma Jeanne' and then 'Happy Hunter II') but it crashed while being flown to France. The decals furnished in this kit are for that second prototype.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187