Plastic Model Kit, Box Condition: Exc++
$22
Excellent injection molded model that is well detailed inside and out. Never started. The parts are either still in the factory sealed bags or inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: NM
$28
Excellent model dated 1991. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$26
Excellent model dated 2002. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$26
Excellent model dated 2003. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$16
Factory sealed blister pack from 1973. Well molded kit with flexible treads, detailed bogies and rotating turret. Includes a color paint guide and markings for the Commanding Officer's tank No.3 Sqn No.1 Tank Division Malaya, 1942 from the Fall of Singapore.
Plastic Model Kit, Box Condition: VG
$34
This original issue from the early 1970s is a well molded and detailed kit that features all parts for stock or race versions, custom 2x4 carbs, chrome valve covers, headers, four speed shifter, steering wheel, headlight fillers, drag grille, rear spring shackles, extended shocks, traction bars, wheels & rims and more, opening hood, detailed engine/chassis and interior, removable hardtop and decals. Nicely molded in chrome, white, clear and rubber. Never started. The chrome and white parts are still in the factory sealed bags and includes clear, tires, decals and instructions.
Plastic Model Kit, Box Condition: VG
$30
Well detailed model of this historic carrier and space aircraft. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc+
$22
Still factory sealed. This 1989 issue features 55 pieces, cockpit detail, crew of two, opening rear upper and lower cargo doors, rotating blades and more. Includes paint guide and decals for all helicopters listed.
Resin Model Kit, Box Condition: Sealed NM
$34
Still factory sealed. Limited edition, beautifully cast high definition resin kit that features a good cockpit and fine recessed panel lines.
Resin Model Kit, Box Condition: Sealed Exc
$64
Still factory sealed. Rare and the only kit of this subject. This limited edition model is finely cast in high definition resin and features all fine recessed surface detail, a clear vacuform canopy, 'good' cockpit detail and more. From the excellent website daveswarbirds.com: The aircraft that was eventually to be known as the Ki-77 was designed as a civilian long-distance record-breaking aircraft which would fly in the sub-stratosphere. It was hoped that its development would eventually lead to a future stratospheric transport aircraft. Work on the project began in March 1940, with further development being interrupted by the beginning of the Pacific War. Development resumed in the summer of 1942 under the designation of Ki-77, with the hopes that it could be used as a long-range communications aircraft that would help keep Japan in contact with the other Axis powers. Only two prototypes were completed, though they did achieve some unofficial speed records before the war's end.
Resin Model Kit, Box Condition: VG+
$110
Rare, limited edition model that is beautifully case in high definition resin. Features all fine recessed panel lines, very good cockpit, detailed gear wells, cast metal landing gear struts and more. With full decals and a full color paint guide for two different aircraft. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Exc
$59
Rare, limited edition model that is beautifully case in high definition resin. Features all fine recessed panel lines, excellent cockpit and engine, fully enclosed gear wells, reinforced landing gear struts and more. With full decals and paint guide. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Sealed Exc
$36
Still factory sealed. Hard-to-find limited edition model finely cast in high definition resin. Features all fine recessed surface detail, a clear vacuform canopy, 'good' cockpit detail and more.
Resin Model Kit, Box Condition: Sealed NM
$36
Still factory sealed. Hard-to-find limited edition model finely cast in high definition resin. Features all fine recessed surface detail, a clear vacuform canopy, 'good' cockpit detail and more.
Resin Model Kit, Box Condition: VG+
$59
Rare. This is a limited edition model that is beautifully cast in high definition resin. Features a full cockpit, fully enclosed gear wells, strengthened landing gear struts and fine recessed panel lines. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The evolution of the Heinkel's P.1078A was redesigned as the asymmetrical P.1078B, a tailless interceptor with 40-degree wing sweep, one turbojet engine and a single-seat cockpit. In addition to having no horizontal or vertical stabilizers or control surfaces, the fuselage was a unique dual-gondola arrangement in which the cockpit was on the left while the right gondola held the armament and radar equipment in the night fighter version. The jet intake was to be between the two gondolas at the front of the fuselage. One other design feature of note was the nose leg landing gear was situated under the starboard side gondola. The airframe was designed for a single HeS 011 series turbojet engine while armament was to be 2 x 30mm MK 108 cannons. The onboard radar would have allowed the P.1078B to perform night fighter duties. Projected performance was a maximum speed of 637 mph. The design had advanced to the construction phase, but the end of the war stopped that so the aircraft did not reach flying status.
Plastic Model Kit, Box Condition: Sealed NM
$110
Still factory sealed and in 'near mint' condition. Very rare and from the 1970s. Features big, detailed V8 engine and engine compartment, opening hood, giant off-road tires, roll bar, detailed suspension and four wheel drive, clear sun roof, spare tire, complete interior, CB radio and antenna, west coast mirrors, large colorful decal sheet and more.
Plastic Model Kit, Box Condition: Sealed VG++
$249
Still factory sealed. Rare one-and-only issue from 1972 and even harder to find in this condition. Features parts to build any one of the three version listed including wild 'Spoof' with dual carbs well above the hood and cone intakes. Includes detailed 454 CID Chevrolet V8 engine with choice of single four barrel carburetor and dual quads & intake system, opening hood, full interior, stock exhaust manifolds or headers, optional roll bar, standard suspension or pro stock rear, stock or deep dish mag wheels, hood pints, bolt-on spoiler and more. Molded in colored plastic, chrome, clear and rubber. Please note this kit must be shipped insured.
Plastic Model Kit, Box Condition: Sealed VG++
$64
Still factory sealed. One and only issue dated 1980 features V8 engine with dual quads, opening high-rise hood, detailed engine compartment, fully equipped police interior, side pipes, front air dam, spoilers, weapons, police flashers and more.
Plastic Model Kit, Box Condition: Sealed Exc+
$285
Still factory sealed. Very rare and even more so in this condition. The seal has drawn the box top slightly concave as shown. Original and only issue that has always been stored in a climate controlled residence. Please note this kit must be shipped insured.
Plastic Model Kit, Box Condition: Good
$32
Rare original issue from 1964; not the common reproduction. Stroker McGurk was created and drawn by Tom Medley for Hot Rod Magazine. The popularity of the character gave MPC an idea - why not make a model? While an excellent kit, it proved to be a poor marketing choice. The kit was far less popular than the cartoons. As a result, it was quickly and quietly withdrawn from production, making the originals very rare. This Race Car is heavily styled on the Red Baron's Fokker DR-1 and molded in dark red and chrome plate. The chrome parts are in 'mint' condition. The kit has never been started. It has been inventoried and NOTE: missing one part, steering wheel. Includes all other parts and includes 'excellent+' condition decals and instructions. No scale is given but it is large; the body measures 10 inches long when assembled.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206