Lindberg Laird Tuner Meteor Thompson Trophy Air Racer Roscoe Turner, 1/32, 70562
Plastic Model Kit, Box Condition: Sealed NM
$20
Still factory sealed. 1992 issue of the 1/32 Pyro kit. Well molded for the times, the kit features good cockpit detail, moving control surfaces, pilot figure and clear canopies. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Lindberg Focke Wulf FW-190D-9 - (FW190D9), 1/72, 433-29
Plastic Model Kit, Box Condition: Exc++
$26
One-piece soft box dated 1965. This box is in excellent condition which is most unusual for these thin boxes. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Lindberg F-86 Sabre Jet NATO Jet Fighter - With Motorized Jet Sound, 1/48, 310M-120
Plastic Model Kit, Box Condition: Exc++
$59
1965 hardbox issue in 'excellent++' condition. First motorized release. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Lindberg Convair XFY-1 - Vertical Take-Off Fighter, 1/48, 526-98
Plastic Model Kit, Box Condition: Exc+
$85
Rare early issue from the 1950s with dramatic Ray Gaedke artwork. The Convair VTO was a Navy program for a high performance zero-length take off fighter. The aircraft flew well but transition from vertical/horizontal and back was tricky. This, combined with the performance of the new jets signaled the end of the program in 1955. Comes with boarding ladder. Molded in the correct high gloss silver and clear. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Lindberg Air Force Tank Destroyer P-47 Thunderbolt Motorized, 1/48, 303M-129
Plastic Model Kit, Box Condition: Sealed Exc+++
$95
Still factory sealed. First motorized release from the 1950s/early 60s in a hardbox and classic Ray Gaedke Art. Features motor driven prop, full landing gear, bombs and rocket load-out and extensive cowl checkerboard and invasion white-black stripe decals. Molded in green and clear (although I cannot confirm that). Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Lindberg F-80C Shooting Star - (P-80), 1/48, 500-98
Plastic Model Kit, Box Condition: NM
$74
1950s issue. The hardbox is in exceptional investment-grade "near mint" condition with fantastic color and gloss, four solid corners, no fading and no tears. Very slight wear is the only flaw. Molded in the correct silver and clear with the early O-lin style stand. The kit has not been started and is complete with all parts, decals and instructions. Paul Lindberg got his start in 1930s model aviation by designing, building and flying stick and tissue aircraft. His plans appeared in Popular Aviation magazine and he soon made a name for himself. When injection molding showed the way to increased kit sales in the late 1940s/early 1950s, he quickly teamed up with Mr. Olsen to create 'O-lin' models. Ray Gaedke was one the the early artists for O-lin, and he help pioneer dramatic and colorful box artwork. In the early 1950s Paul Lindberg was running the company and had the logo changed to his name. The first logo was circular, with 'Lindberg' in middle and 'Products' 'Incorporated' arched across the top and bottom. The second logo is the 'Yellow Rectangle' that is on this kit. Ray Gadke continued his bold and colorful artwork for Lindberg and did this F-80C boxart as well.
Lindberg Republic P-47N Thunderbolt, 1/48, 511
Plastic Model Kit, Box Condition: Exc++
$68
Rare 1st issue small hardbox from 1952 in 'excellent ++' condition with like-new color and gloss, four solid corners, light wear as shown, circle logo and Ray Gaedke artwork. This early issue box almost seems to small for this large model- but it does fit. Molded in the correct early light gloss gray and clear. There are panel lines but very minimal rivet detail; later issues had heavy rivet detail added. Never started. Inventoried 100% complete with all parts, decals and instructions. This kit started as a basic 1/48 scale model with full landing gear, rockets and bombs. Surface detail was minimal Lindberg modified it in the mid 1950s with extensive rivet detail. in the late 1950s, they modified it again to a motorized version with the batteries in the stand and a kit electric motor in the nose. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Lindberg Mars Probe Communications Satallite, 1/200, 1150-150
Plastic Model Kit, Box Condition: Exc
$125
Rare second issue dated 1969 with unique hardbox artwork. The original issue was from the late 1950s. Molded in correct white with clear green tinted parts. Features three state rocket that snaps apart, cargo loading truck, interior fuel tank, and detailed removable satellite with removable cover and interior instrument group. Never started. All parts still sealed in the factory bag and complete with all decals and instructions.
Lindberg Stearman PT-17 Kaydet Motorized, 1/48, 508M-100
Plastic Model Kit, Box Condition: NM-
$59
With motorized prop action. 1966 hardbox issue with Tom Morgan box illustration. The box is in exceptional 'Near Mint-' condition with perfect color and gloss four solid corners, no tears, stained, fading or missing litho. The only flaws are very light wear. The Stearman was the last standard biplane produced for the Army and Naval Air Forces. Production was over 10,000 planes, making if more prolific than any other US Biplane design. Kaydets helped to train over 60,000 allied airmen in WWII. Never started. Factory sealed motor. All other parts have been inventoried 100% complete with all parts, motor, decals and instructions.
MPC Supermarine Spitfire Mk.1a - (Airfix Molds), 1/24, 1-4601
Plastic Model Kit, Box Condition: Good
$42
One of at least three MPC releases of this very large kit that is over 18 inches long when assembled. Features detailed Rolls-Royce Merlin engine with removable panels for display, two detailed gun bays with 8 Browning .30 caliber machine guns and removable panels, retractable landing gear, real rubber wheels and more. The kit has never been started. Inventoried and NOTE: missing one part, #153 the main (clear) canopy. Otherwise includes all other parts, decals and instructions.
Matchbox Westland Lysander Mk I/III - 357 (SD) Sq 'C' (Special) Flight SEAC Burma 1944 / 16 (A/C) Sq Odiham 1939 / 161 Sq (Special Duties) Tempsford Late 1942, 1/32, PK504
Plastic Model Kit, Box Condition: Good
$57
Dated 1983. An excellent kit for that time featuring highly detailed cockpit with pilot and navigator, separately molded control surfaces, opening canopy, rotating wheels & prop and more. Contains decals for three RAF aircraft including special ops. The kit has never been started. Inventoried 100% complete including decals and instructions.
Hobby Craft Lockheed F-94B Starfire - 59 FIS 1954 or 101st TIS 1955, 1/48, HC1598
Plastic Model Kit, Box Condition: VG
$36
Hard to find 1/48 'B' variant featuring all very fine recessed panel lines, good cockpit detail with optional position canopy, detailed gear wells, optional position wing flaps with detailed inside surfaces and two decal choices. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Glencoe Grumman J2F-2 Duck - (J2F2), 1/52, 4101
Plastic Model Kit, Box Condition: Good
$32
From nicely done ex-ITC molds and very close to 1/48 scale. Never started. Inventoried with all plastic parts and instructions present. NOTE: missing decals.
Lindberg Lockheed Vega Winnie Mae - Post's Round the World Record Settting Aircraft, 1/48, 533-98
Plastic Model Kit, Box Condition: VG
$38
Original 1950s issue with fantastic Ray Gaedke box art. In 1931, Post and Gatty flew the Vega 'Winnie Mae' around the world in 8 days, 15 hours and 8 minutes for a new world record. In 1933 Post tested a gyroscope automatic pilot and radio direction finder in another record flight lasting 7 days, 18 hours and 45 minutes. This aircraft is now in the Smithsonian Museum. Vegas did see military service, with a few operated by the RAAF, Spanish Republic Air Force, and USAAC. This model features moving control surfaces, cockpit detail, rotating prop and wheels, clear display stand and very colorful Winnie Mae decals. Never started. Inventoried 100% complete including all parts, decals and instructions.
Hasegawa F-86F Sabre - USAF 'Black Angel' Lt Ed Barns 311th FBS/58th FBW Korea 1953, 1/32, 1084
Plastic Model Kit, Box Condition: VG
$65
Dates from the early 1980s and is easily one of the finest kit of that time. Deluxe and highly detailed down to jet engine wiring and plumbing. Features separately molded ailerons, wing flaps and rudder, complete cockpit and pilot, removable rear body as the real aircraft and removable jet engine, full underwing load out, opening canopy, detailed gear wells and landing gear, removable gun compartment panel and detailed gun bay, highly detailed air brake bays and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa Focke-Wulf FW-190 A6 or A8 - With Two SuperScale International Aftermarket Decal Sheets - III/JG54 Green Hearts or JG54 Major Walter Nowotony, 1/32, S10
Plastic Model Kit, Box Condition: VG++
$46
Includes SuperScale #32-88 FW-190A/Fs 'Graf, II/SG4' and SuperScale #32-2 FW-190A 'National Insignia, Squadron Insignia, Kill Markings.' Both sheets are never used, in excellent condition and include the paint and marking guides. The actual kit is nicely detailed and from 1987. Features optional parts to build both versions listed, good cockpit, optional position canopy, detailed engine and gun bay with separately molded access panels, detailed gear wells, optional position flaps and a drop tank. Includes decals with painting guide for both aircraft listed in the title. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Hasegawa P-51D Mustang - 'Man 'O War' 334 FS 4FG 8AF Lt. Kinnard / 'Ridge Runner III' 335FS 65 FW 8th Air Force Maj. P. Mckennon, 1/32, S12
Plastic Model Kit, Box Condition: VG+
$44
Large scale and nicely detailed model features very fine panel lines, highly detailed engine and firewall, complete cockpit, pilot figure, detailed gear wells, removable cowl panels, detailed wing machine guns and ammo trays with removable wing panels, opening canopy and drop tank and bomb load. Includes a very large and colorful sheet for the two aircraft listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.
ESCI Beechcraft G17S Staggerwing - Or US Navy GB-2, 1/48, 4103
Plastic Model Kit, Box Condition: Sealed Exc+
$44
Still factory sealed. Features very good cabin detail with cabin tub, seating, pilot, instrument panel & yoke, optional position cabin entry door, optional position main and tail gear, good engine detail and decals for a restored G17S N99DV (1990) or the Beechcraft GB-2 US Navy from The Vero Beach (FL) Naval Air Station 1944.
Guillows Bell P-39D Airacobra - USAF Or USSR - 25.75 Inch Wingspan for Free Flight / U Control / R/C, 1/12, 806
Multimedia Model Kit, Box Condition: Good
$89
Large 1/12 scale flying scale model sold new on October 15, 1981 at the "Toy & Model Shop" at 711 Coddingtown Santa Rosa, CA. Includes provisions for rubber or U Control flight or could be converted to RC. Features movable ailerons, elevator and rudder, full cockpit, flexible nose gear, scale prop, numerous detailed vacuform parts, full pilot figure, clear vacuform bubble canopy, injection molded plastic wheels and flying prop & nose bearing, over 100 die cut balsa parts, 19 die-cut plywood parts, all material needed for U-Control installation, covering tissue, full color decals for both air forces, superb full size plans and more. The kit has never been started. Smaller parts are still in the factory sealed bag; all other parts have been inventoried complete with plans and instructions.
Guillows B-25 Mitchell U-Control or Static Balsa Model, 1/32, 805
Wood and Plastic Model Kit, Box Condition: VG
$56
Large 1/32 scale stick-and-tissue model can be built as a detailed static display or flown with twin .012 to .049 engine U-Control. R/C fliers have converted this kit to electric power and radio control. Features complete color decals, numerous plastic parts such as cockpit surround, engine nacelles and more, movable control surfaces, detailed landing gear, hinged landing gear doors and more. The kit has never been started. Some parts are still in the factory sealed bags. The parts that are not internally sealed have been inventoried complete, including decals and instructions.