Revell Lockheed Electra American Airlines - 'S' Issue, 1/115, H255-98
Plastic Model Kit, Box Condition: Good+
Sold
First issue 'S' kit dated 1957. Wonderful boxart. In the 1960s these molds were modified to make the P-3C Orion, making a reissue of this kit impossible. Features optional position cabin doors, rotating props, optional position landing gear, large colorful decal sheet and famous Revell 'Globe' clear swivel-base stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: a tip is broken off the ADF antenna, but the tip is present and can be repaired. The instructions have a very small section torn from the edge.
Hasegawa F6F-3/5 Hellcat - US Navy VF-17 / VF-15 / F.Mk.1 Royal Navy - (F6F F6F5 F6F3), 1/32, ST7
Plastic Model Kit, Box Condition: Exc
Sold
NOTE: builder kit only. Please read carefully. Very nicely detailed kit with 97 parts. Features complete engine, individual cowl flaps, full cockpit with optional position canopy, detailed wing gun bays with removable covers, moving wing flaps and rotating prop. Has decals for VF-17, VF-15 and Royal Navy No.800 Sq. NOTE: this kit has parts from two kits and a small amount of professional quality assembly. The control stick is missing; but there is a complete professional-built and painted cockpit present which includes the stick. There is one engine cylinder missing, but there is a complete pro-built and painted engine present also. Small engine part #45 is glued to #44 - quality of assembly is professional. Missing one rear side windows but has quality clear material if you wish to make one. (Not needed for F6F-3 variant, only needed for -5). Also includes many aftermarket photoetched brass cockpit detail parts and printed instrument panel for the PE cockpit. Inventoried with all other parts and there is no other assembly or painting. Includes new condition decals and instructions.
Aurora MG TD Sports Car, 1/32, 590-69
Plastic Model Kit, Box Condition: Exc++
Sold
Very rare first issue. In 1954 or very early 1955, Aurora purchased 7 car molds from Advance Molding Company. These became Aurora's first civil automobile kits. The hardbox artwork is certainly by Jim Cox. The early one-color Aurora WH logo is used on the two short sides only. Notice the very large 'Famous Sports Cars Of All Nations' logo in the top left. The kit features good outline, very good interior with seats, dash board, steering wheel and column and floor with carpet texture, convertible top cover, gas tank and filler cap, front and rear bumpers and real rubber tires. Molded in a very deep gloss red. The kit has never been started. It has been inventoried complete with all parts and includes the correct early instructions.
Aurora North American B-25 Mitchell - Famous Fighters Of All Nations Issue, 1/46, 373-249
Plastic Model Kit, Box Condition: Good
Sold
Second issue dated 1957. Please note that on this issue, it still says 'Famous Fighters Of All Nations' but the rectangular 'Aurora Line' logo has been 'yellowed' out and the new 'Famous Fighters' oval and sunburst logo added. Big 1/48 scale kit molded in silver and clear. Never started. Inventoried complete with all parts, decals and and instructions.
Hasegawa Vought F4U-5N Corsair + True Details Cockpit / Eduard PE - US Navy VC-3 Det. D Korea July 1953 / VMF(N)-513 Korea 1951 (F4U5N), 1/48, JT75
Plastic Model Kit, Box Condition: Exc+
Sold
Includes True Details #48497 F4U-5/-5N/AU-1 Cockpit Detail Set in resin and Eduard #48-347 PE Detail Set. Both sets are still factory sealed. The model itself is from new, high quality molds and features all very fine recessed panel lines, detailed cockpit, optional position canopy, detailed gear wells and inside gear doors, optional position flaps and extensive weapons load and wing radar. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa Fuji T-1A Trainer JSDF, 1/72, B14
Plastic Model Kit, Box Condition: VG+
Sold
Very nicely molded kit with very fine raised panel lines, cockpit and gear well detail, two pilot and drop tanks. Includes decals for two aircraft. The kit has never been started. Internal factory sealed bag including decals and instructions. The T-1 was designed and built in Japan in 1958 as a replacement for the aging T-6 Texan trainer. The design was very successful and remained in service until 2006.
Strombecker Temco TT-1 Primary Trainer - US Navy, 1/48, D36-100
Plastic Model Kit, Box Condition: Exc++
Sold
Rare kit in fantastic condition. The notoriously thin Strombecker box is in near excellent condition. This model was unique in that a customer could lift the color 'Pin-Up' artwork to view the kit inside. The kit was still sealed with a clear cellophane glued to the inside of the box lid. Not only is the cellophane intact, but the pin up artwork has never been lifted. Color and gloss is very bright. Strombecker was most famous for making the finest in wooden kits. During the short time that they made wooden kits, they released many interesting subjects that are desirable today. Nicely molded kit with recessed panel lines. Features crew, ejection seats, instrument side and main panel detail, opening canopy and optional position landing gear. Never started. Inventoried 100% complete with all parts, decals and instructions.
Revell Grumman EA-6A Wild Weasel + Verlineden Update + Eduard PE + Super Bug Seamless Intakes - US Marines VMCJ-1 1966/1975 or US Navy VAQ-33 Firebirds NAS Key West FL, 1/48, 85-5623
Plastic Model Kit, Box Condition: Exc
Sold
Includes Verlinden #828 A-6E Intruder Update Set with full cockpit, ejection seats, other resin parts, two PE frets and more, Eduard #48172 A-6E/EA-6A PE Detail Kit with one large and one small fret and film instruments and Super Bug #SBMR480030 Seamless Intakes with Compressors Set. All three items have never been used and are complete. The actual kit is dated 2009. Very nicely detailed kit with full cockpit, detailed gear wells, optional position speed brakes with detailed wells, optional position pilots boarding stair and canopy, ECM pods, fuel drop tanks, HARM missiles and more. Includes markings for both listed aircraft. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Revell Orient Express HO Train, 1/87, 2190
Plastic Model Kit, Box Condition: Exc
Sold
Nicely molded kit contains the complete consist as shown on the box top. Engine and tender are nicely molded and detailed. Both passenger cars are highly detailed inside and out. The kit has never been started. Internal factory sealed bags including decals and instructions.
Revell Sikorsky CH-53 G/GS - Luftwaffe, 1/48, 04446
Plastic Model Kit, Box Condition: Good-
Sold
From 2002. Large and highly detailed kit. Features many optional parts for the 'G' or 'GS' versions, movable main and tail rotor, auxiliary fuel tanks, detailed full cockpit, full cargo interior, opening cargo door, working drive-on ramps and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram Consolidated B-24J Liberator - with Super Scale Decals 'The Goon' / 'The Witch' / 'Liberandos', 1/48, 5601
Plastic Model Kit, Box Condition: VG-
Sold
Includes Superscale sheet #48-265 B-24 Liberators with 308 BG 14 Air Force 'The Goon', 367 BG 'Liberandos' and 98th BG 9th Air Force 'The Witch'. Decal sheet has not been used and is as new with paint and marking guide. The kit itself is the first issue from 1976 and has excellent mold quality. Includes tow tractor. Features extensive interior detail, rotating turrets, elevating guns, optional position side gun positions, full bomb bay with bomb load, steerable nose wheel, rotating props and optional position bomb bay doors. Never started. Inventoried with aircraft and tow tractor parts present and instructions. NOTE: missing 4 crew members and Monogram decals. Only the Super Scale decals are present.
Airfix The Royal Sovereign - British Man-O-War - Craftmaster Issue, 1908-400
Plastic Model Kit, Box Condition: Good-
Sold
Very nicely made kit. One of two Craftmaster issues with slight variations in box design. As with most Airfix ship kits, this one is finely molded and very well detailed. Measures about 18 inches long when assembled. Features intricately engraved hull, separately molded deck fittings, cannons and carriages, separately molded cannon hatches, excellent pre-molded rat lines, billowing sails, rigging diagram and display stand. The kit has never been started. Inventoried with all parts present. Includes colorful flag sheet and instructions.
Pyro USS Washington Battleship - Table Top Navy, 1/1200, C389-50
Plastic Model Kit, Box Condition: VG-
Sold
Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded turrets, stacks, many superstructure parts and more. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.
Pyro IJN Yamato Battleship - Table Top Navy, 1/1200, C386-50
Plastic Model Kit, Box Condition: Exc+
Sold
Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded turrets, stacks, many superstructure parts and more. The kit has never been started. It has been inventoried complete with all parts and instructions. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.
Rareplane Grumman G-23 Goblin / FF-1 US Navy / SF-1 - Bagged, 1/72
Vacuform Model Kit, Box Condition: Sealed
Sold
Still factory sealed. The G-23 was the Canadian version of the Grumman FF-1. The FF-1 was not only Grumman's first fighter, but was the first production fighter with retractable gear, all metal construction and fully enclosed cockpit. Twenty seven were produced, and this aircraft led to the famous line of Grumman Biplanes and Monoplanes...F3F, F4F, F6F, etc. Very high quality vacuform kit with moldings equal to or better than many older injection molded models. Features very fine detail, complete cockpit, clear canopies and instructions/plans. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.
Aurora Panzerkampfwagen V Panther A - 3rd SS Panzer/116th Panzer/12th SS Panzer, 1/48, 071
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still mint and factory sealed. Hard-to-find 1/48 scale armor kit in the block 'Aurora' log box from 1976. Features elevating gun, rotating turret, figures, opening hatches and operating treads and bogies. Has decals for 3rd SS Panzer Division/116th Panzer Division or 12th SS Panzer Division.
Estes Titan III E Missile, 1/73, 2019
Multimedia Model Kit, Box Condition: Exc+
Sold
Very rare. Nearly 2.5 feet tall when built. Can be made as an accurate static or flying model. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Pyro USS Massachusetts Battleship - Table Top Navy, 1/1200, C395-50
Plastic Model Kit, Box Condition: Sealed Good++
Sold
Still factory sealed but seal has splits and box has damage as shown. Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded turrets, stacks, many superstructure parts and more. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.
Pyro Prinz Eugen Heavy Cruiser - Table Top Navy, 1/1200, 381-49
Plastic Model Kit, Box Condition: Good++
Sold
Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded turrets, stacks, many superstructure parts and more. The kit has never been started. It has been inventoried complete with all parts and instructions. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.
Country Lane Dutch Supply Pennsylvania Dutch (Amish) Buggy - and Olde Time Horse and Harness For Buggy - Both Kits, 1000-2008
Multimedia Model Kit, Box Condition: VG+
Sold
You are purchasing both kits. From 1967. The first kit is part number 1000 and is a Amish Dutch Buggy. The scale is not given, but the kit is large scale - it measures about 8.5 inches long without the front wooden bar. With the bar it is approximately 11 inches long. Contains three sheets of thick, die cut balsa wood parts, four injection molded spoke wheels, preformed wooden parts and metal parts, wooden and metal stock, covering material and other parts has needed. Includes full instructions and detail drawings. The Horse and Harness is kit 2008 and this kit is in the same scale as the Buggy kit. Contains a very nice factory pre-painted injection molded horse, soft plastic harness, metal harness pins, bridal, neck strap, metal stock and other parts as required as well as full instructions and photos. Both kits have not been started and are complete with all parts and instructions.