Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell USS Los Angeles CA135 - Pre 'S' - Fall River - Baltimore - Pittsburg - Columbus - Bremerton - Canberra - Toledo - Quincy - Chicago - St. Paul - Helena - Macon - Boston, 1/490, H306-169

Plastic Model Kit,   Box Condition: VG+

Sold   

1954 Pre 'S' hardbox first issue. The colors and gloss are brilliant and the corners are solid with no repairs and there has never even been tape on the ends. There is wear at the top left as shown. Inside, the kit has never been started and has been inventoried 100% complete with all parts, decals, flag sheet and instructions present. Has decals and hull numbers for these cruisers: USS Los Angeles - Fall River - Baltimore - Pittsburg - Columbus - Bremerton - Canberra - Toledo - Quincy - Chicago - St. Paul - Helen - Macon - Boston.

Revell USS North Carolina, 1/570, H313

Plastic Model Kit,   Box Condition: Good

Sold   

First issue of this kit dated 1969. Measures 15 inches long when assembled. Nicely molded with excellent detail for that time. Features finely engraved deck and hull detail, rotating main turrets, elevating guns, swiveling cranes and catapults, two scout planes, detailed superstructure and display stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Hasegawa North American P-51D Mustang + Microscale Decals 'The Millie P', 1/32, JS-086

Plastic Model Kit,   Box Condition: Good

Sold   

NOTE: builder kit only. Includes Microscale sheet but the 'Y' is missing on each letter set as shown. The model is the earlier hardbox issue. Features nicely detailed engine, cockpit, bomb and drop tank load and more. The kit has never been started. NOTE: missing (2) 110 gal. drop tanks and machine gun belts. Missing original decals; only the Microscale sheet is present. Otherwise inventoried with all other parts and instructions. Some parts are gray and some are silver; the gray ones are from a later issue.

Otaki Aero Spacelines Guppy 201, 1/144, OT2-40-1500

Plastic Model Kit,   Box Condition: Good-

Sold   

Classic oversize-lifting cargo aircraft. The Guppy could handle a 60 foot yacht, helicopter, fighter aircraft, spacecraft sections or other odd cargo. The Guppy was originally built in 1967 and successfully logged hundreds of thousands of miles. Never started. NOTE: missing decals. Inventoried with all parts and instructions.

Monogram Curtiss P-36A with Rarebits YP-37 Conversion - Blue Box Issue, 1/72, PA145-70

Plastic Model Kit,   Box Condition: Exc+

Sold   

Includes Rarebits YP-37 conversion. Conversion is complete with all parts and instructions. The actual kit is the first issue from 1967. Very finely molded with excellent detail and traditional Monogram quality. The model has never been started. Inventoried 100% complete with all parts, decals and instructions. The Hawk P-36A has the dubious distinction of fighting on both sides and for more countries than any other plane in history during the opening years of WWII. This Hawk, one in a long progression of famous fighter aircraft, was the winner of a 1935 competition. The USAA Corps received the first aircraft in April of 1938 and the French ordered 100 aircraft in May of the same year. French Hawks shot down just over 30 German planes during the battle for France. The Germans captured the aircraft and sold them to Finland. Others were captured when the Germans overran Norway. In all over 800 Hawks were produced and served in China, Netherlands East Indies, Portugal, Great Britain, Thailand, Argentina and Peru. Although an excellent fighter in 1935, the Hawk was outclassed by the time the war started but when flown properly still gave a good account of itself.

Frog Armstrong Whitworth Whitley Mk.V/Mk.VII + Profile Publications Book, 1/72, F207

Plastic Model Kit,   Box Condition: Good-

Sold   

Includes Profile Publications #153 'The Armstrong Whitworth Whitley' book in very good condition. The actual model has parts and decals to build either version. Although older, high quality Frog moldings do not have rivet detail, so you can build a very realistic model. Features numerous crew stations with crew, rotating turrets, wheels and props. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Novo Bleriot XI - ex Frog - Bagged, 1/72, F173

Plastic Model Kit,   Box Condition: Exc

Sold   

From original Frog molds. Very nice kit and well molded. This was the first aircraft to cross the English Channel on July 25th, 1909. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The header is original and excellent, but the parts bag is not the original bag.

Entex RMS Titanic Ocean Liner - (ex-Revell), 1/350, 8509

Plastic Model Kit,   Box Condition: Good-

Sold   

This kit is originally from Revell molds. Large and highly detailed kit measuring over 30 inches long when built. Just about every aftermarket photo-etched accessory (From Gold Medal Models [GMM] and Tom's Modelworks) you can imagine is available for this kit, so you can create a museum masterpiece if you wish. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: instructions are a photocopy of the original.

Monogram Cessna 180 Sport Plane with Floats, 1/41, PA26-98

Plastic Model Kit,   Box Condition: Fair

Sold   

First issue hardbox dated 1957 with 'Four Star' logo. Has many working features - prop spins, cowl comes off to show detailed engine, wheel retract into floats and doors open to reveal detailed interior. Also has standing pilot figure and swimsuit beauty with skis. Never started. Inventoried 100% complete with all parts, decals and instructions. Instructions and decals are near mint. The box has damage as shown.

Hasegawa Boeing 747 Pan Am - Clipper Flying Cloud or Clipper Carrier Dove (Cargo 747-200F), 1/200, 1170

Plastic Model Kit,   Box Condition: Good+

Sold   

Includes extensive decals for both aircraft. Features very fine recessed and raised panel lines and very good detail overall. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Boeing E-3A Sentry AWACS - USAF Tinker AFB or NATO - Bagged, 1/144, 04364

Plastic Model Kit,   Box Condition: Bagged

Sold   

Has optional position landing gear and decals for the two aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Hasegawa McDonnell Douglas DC-10-30 SAS, 1/200, LC017-700

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed.

Airfix Republic F-84F Thunderstreak - West German or USAF, 1/72, 03022

Plastic Model Kit,   Box Condition: Good++

Sold   

From 1986. Features 65 parts, nicely detailed cockpit, optional position landing gear and speed brakes and an assortment of drop tanks and bombs for the loadout. Includes markings for both versions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Academy P-38J P-38L F-5E Droopsnoot Lightning + Eduard PE + True Details Wheels + Quick Boost Guns, 1/48, 2215

Plastic Model Kit,   Box Condition: NM

Sold   

Model includes Eduard #FE265 Color PE Interior Details, True Details #48063 2 Main and 1 Nose Wheel Set (checkerboard tread) and Quickboost #QB48-361 P-38 Gun Barrels. The kit itself is very cleanly molded with excellent detail. Features all fine recessed panel lines, all required parts for all variants listed, detailed cockpit, optional position canopy and optional bombs, rocket launchers, rockets and drop tanks. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Pica T-28B R/C Stand-Off Scale - 65 inch Wingspan, 50201

Wood and Plastic Model Kit,   Box Condition: VG++

Sold   

Very large and highly detailed rc flying model kit for 4 to 6 channels. Very high quality kit. Features 65 inch wingspan and designed for rudder, elevator, aileron, flaps, throttle and retractable landing gear. Has many prefabricated components and a plastic cowl and canopy. Weight with retracts is 7.5 lbs. The kit has never been started and is 100% complete with all parts, plans, instructions and decals: NOTE: rear canopy is present but has cracked. You will need to secure an aftermarket one or vacuform your own. NOTE: this kit is factory packed in a very durable and strong box. It will be shipped without an external box unless you request otherwise.

Lindberg USS Olympia 1889 - Flagship of Admrial Dewey At Manila Bay (Ex-Pyro), 1/240, 716

Plastic Model Kit,   Box Condition: Good

Sold   

Larger scale full-hull kit from ex-Pyro molds. Never started. Inventoried complete with all parts and instructions.

Monogram Speedee-Bilt Boeing PT-13 Kaydet, G5-100

Wood Model Kit,   Box Condition: Fair

Sold   

The first trainer standardized for the Air Force and Navy. Pre-fabricated rubber-powered wooden scale flying model kit. Speedee-Bilt kits contained die cut and pre painted wooden parts, completely formed airfoil wings, carved wheels and plastic details such as pilot prop. Assembly is by detailed instructions. This kit has never been started. Inventoried with all parts and instructions but NOTE: missing decals. Before there were plastic models, there were wooden aircraft kits. These usually came in two types - solid and stick and tissue. The solid models were static and usually contained a few blocks of balsa and sometimes a detail part or two. These 'Make Wood Look Like Plane' models required a very high level of skill in carving and finishing. The stick and tissue variety were slightly easier to build and provided the ultimate thrill - they could fly when complete with rubber power (and later with free-flight gas and eventually RC). They still required a great deal of skill, so manufacturers sought ways to make model building more accessible to everyone. One idea was pre-carving and/or prefabrication. This raised prices, naturally. Many manufacturers launched lines of 'easy' to build flying models but only Monogram succeeded in making an entire line at an affordable price that would actual fly. The original 'Speedee-Bilt' kits were in one-piece two-color boxes. In the early 1950s, shortly before plastic kits were available, Monogram changed to the 'hardbox' with a lithographic slick glued to the top as this kit.

Monogram Speedee-Bilt Spad Pursuit - Flying Scale Model Airplane, G8

Wood Model Kit,   Box Condition: Exc

Sold   

First issue from the late 1940s or early 50s. For the advanced Monogram collector. Early completely pre-fabricated multi-media kit featuring pre-colored and die cut balsa wood, precarved balsa, finished Monofoil wing, plastic detail parts (such as cowl and prop) and rubber motor. Designed for rubber free flight or Co2 engine power. Never started. Inventoried 100% complete with all wood and plastic parts, decals and instructions/plans. Before there were plastic models, there were wooden aircraft kits. These usually came in two types - solid and stick and tissue. The solid models were static and usually contained a few blocks of balsa and sometimes a detail part or two. These "Make Wood Look Like Plane" models required a very high level of skill in carving and finishing. The stick and tissue variety were slightly easier to build and provided the ultimate thrill - they could fly when complete with rubber power (and later with free-flight gas and eventually RC). They still required a great deal of skill, so manufacturers sought ways to make model building more accessible to everyone. One idea was pre-carving and/or prefabrication. This raised prices, naturally. Many manufacturers launched lines of 'easy' to build flying models but only Monogram succeeded in making an entire line at an affordable price that would actual fly. The original "Speedee-Bilt" kits were in one-piece two-color boxes. In the early 1950s, shortly before plastic kits were available, Monogram changed to the 'hardbox' with a lithographic slick glued to the top. Speedee-Bilt kits contained die cut and pre painted wooden parts, completely formed airfoil wings, carved wheels and numerous plastic details like cowling, pilot, missiles, prop and whatever was required. Assembly was by detailed full size plans and instructions. Monogram carried the Speedee-Bilt line for several years past it's prime and the advent of plastic kits, a testimony to the quality and popularity.

Hasegawa Mitsubishi A6M2 Type 21 Zero Fighter - Carrier IJN Akagi (Shigeru Itaya) / Tainan AC (Saburo Sakai) / IJN Ryujo (Tadayoshi Koga), 1/72, A3

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very well molded with fine rivet detail, cockpit, engine and rotating propeller. Has decals for the three aircraft listed which includes famous aces.

Revell Fairey Rotodyne - Cutaway Model with Full Interior, 1/78, H185-198

Plastic Model Kit,   Box Condition: VG+++

Sold   

Very rare. Unique and highly detailed model in near 1/72 scale of this vertical take-off and landing transport airplane. The first prototype flew in November 1957 and appeared at the Farnborough Air Show three years later. The Rotodyne could carry 60 civil passengers 0r 70 fully equipped troops as well as cargo. Cruising speed was 175 kts and maximum range was 610 nm. Kit features cut away design - a large fuselage panel can be removed to show off the complete interior with passenger seats, passengers, pilots, stewardess, baggage compartment (complete down to the suitcases), bathroom with toilet and cargo compartment including boxes, tire, carpet and barrel. Another panel comes off at the support for the rotor to reveal internal aircraft structure and the rotor power transmission. Also includes complete cockpit, working boarding door and stairs, working rear clam-shell cargo doors, operating rudder and elevators and rotating wheels, props and main rotor. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.