Aeroclub Parabellum Machine Guns (2), 1/72, G004
Metal Model Kit
Sold
Includes 2 guns. Precision metal castings that are an excellent upgrade for your model. Much higher detail than injection molded plastic. NOTE: parts have never been used and are inventoried 100% complete. They are sealed in a small ziplock bag that does not include the shown header. The Aeroclub header is shown for reference only.
Revell North American B-25 Mitchell Giant Bomber Pre 'S' Kit, 1/65, H216-98
Plastic Model Kit, Box Condition: Exc+
Sold
Original first issue from 1954 and before the 'S' Cement logo was used. Classic Kishady box artwork. Box illustration has fantastic color and gloss. Correctly molded in gloss olive drab and clear, with the famous globe base. Features turrets and propellers that rotate, pilot, copilot and bomber figures and famous 'The Flying Dragon' decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
KVZ Antonov An-14 - Clod, 1/72
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. The side of the box shows two military and one Aeroflot version, with a detailed interior.
Aero 72 DH Venom FB4 - RAF WR470 & WR410 (Aeroclub), 1/72
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Rare. Limited run kit. Features injection molded main airframe parts with fine recessed panel lines, cast metal details, vac canopy and decals for two aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Condor Heinkel He-178 V1 - The First Jet Aircraft, 1/72, C72003
Plastic Model Kit, Box Condition: VG
Sold
The He-178 was the world's first aircraft to fly under jet power. The first practical jet engine, invented by Dr. Hans J. Pabst von Ohain, was running in September of 1937. The engine, the HE S1, was fueled with hydrogen and no had throttle control but produced 250 kg of thrust. Von Ohain began work on the He S2B which ran on gasoline and had throttle control. At the same time, Heinkel engineers began design of the worlds first jet airplane, the He-178. The airplane was single-engined with a flush riveted metal monocoque fuselage, wooden wings and retractable gear. Trials with the S3b engine in the airframe began on August 24th, 1939 and on August 27th, the airplane made the first jet flight. It made 12 flights in all before being retired to the Berlin Air Museum where it was destroyed in a bombing raid in 1943. Well molded kit with fine recessed panel lines, photoetched details, film instruments and injection molded canopy. Never started. Factory sealed bag with instructions. Please note that Condor did not issue this model with decals.
Toko Bell RP-63G Pin Ball Flying Target - (P-63 Kingcobra), 1/72, 114
Plastic Model Kit, Box Condition: VG++
Sold
Nicely molded with fine, recessed panel lines, very good cockpit detail, optional position cabin doors and unique decals and paint guide for this 'Flying Target.' The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. 337 different variations of the RP-63 were built as training aircraft for air riflemen. To protect the aircraft and pilot, the entire craft was covered with a specially treated allow that was 5 to 10 times thicker than normal skin. The maximum thickness was in the areas of the cockpit, engine and fuel tanks. The pilot was given thick armoured glass all around and the rear windows were removed and covered with metal.
UPC Kawanishi N1K2 George Shiden-Kai - (ex-Marusan), 1/97, 7054-29
Plastic Model Kit, Box Condition: VG+
Sold
From Marusan molds. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
UPC Mitsubishi A6M5 Zero - (ex-Marusan), 1/99, 7056-29
Plastic Model Kit, Box Condition: VG++
Sold
From Marusan molds and with box art by Kitta. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
Sierra Gotha GL-VII (GLVII) - 1917 German Bomber - Bagged, 1/72, 72-12
Vacuform Model Kit, Box Condition: VG++
Sold
Very high quality vac kit. Finely molded with excellent detail and several cast metal parts. Includes painting guide for Ukrainian Air Force aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Huma Model Gotha Go-145 B/C/D, 1/72, 3002
Plastic Model Kit, Box Condition: Good
Sold
One of the most successful aircraft designs. Over 12000 Go 145's were built in Germany/Turkey and Spain. The design was rugged, easy to build and simple to maintain. It saw service as a trainer for radio, aerobatics, gunnery, photo recon and instrument training. It also saw combat service from 1942 on as a night bomber. Model builds any of three versions - two seater with gunnery position / Multi role night intruder / two seater with enclosed canopy and spatted wheels. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Toko Hansa Brandenburg D1 'Godwin Brumowski', 1/72, 117
Plastic Model Kit, Box Condition: VG-
Sold
WWI Austro-Hungarian fighter designed by Ernest Heinkel. Features a large full decal sheet including woodgrain decals and intricate wing camo patterns. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Airfix Grumman J2F-6 or OA-12 Duck - Argentina Navy 1957 or USAF 10th Rescue Sq Alaska 1948 - (J2F6) - (J2F6), 1/72, A03031
Plastic Model Kit, Box Condition: Exc+
Sold
The amazing Duck first flew in 1934, saw service all through WWII and was not phased out until the mid 1950s. Very well detailed older kit. Has markings for Observation Squadron Aeronaval No.2 Base Aeronaval Comandante Espora, Bahia Blanca, Argentina and 10th Rescue Sq USAF Elmendorf Alaska, 1948. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Lockheed Super G Constellation Eastern Golden Falcon - 'S' Issue, 1/128, H245-98
Plastic Model Kit, Box Condition: Exc
Sold
1956 'S' issue with the fantastic box art that these kits were famous for. The box is in 'excellent' condition. Color and gloss are like new as are the four solid corners. Flaws include very light general wear and writing in the Revell white logo section (a date of purchase) Instructions and decals are both 'excellent.' The model has not been started. Inventoried complete with all parts, decals and instructions.
Aurora US Army 155mm 'Long Tom' Artillery Cannon, 1/48, 331
Plastic Model Kit, Box Condition: Good-
Sold
1973 soft box issue with the Big 'A' logo square box. This model has almost all the working features of the actual gun and is nicely detailed and molded for that time. Includes ground display base. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Box has a taped hole in it at the lower left.
Carl Goldberg Models Eaglet 50 RC Trainer - 50 inch Wingspan -2 to 4 Channels, G28
Wood and Plastic Model Kit, Box Condition: Exc
Sold
Very easy to build RC training aircraft. For .09 to .2 engines. Large 50 inch wingspan and 38 inch length. Weighs 45-50 ounces. This model came from the estate of a very active and particular early aircraft kit collector. It is like factory-new inside and has not been started. Complete with all parts, plans and decals (if originally included). Carl Goldberg was a gifted designer of model aircraft, and his career spanned the evolution of flying models. His designs and number of titles won in competition at the Nationals is legendary. His first competition was the 1928 Nationals, where he received honorable mention. By 1934 he won the indoor Nats and in 1935 he opened a Hobby Shop, among the first in the nation (the first one was probably opened by Cleveland Models Ed Packard). Awards came quickly. He wrote articles for Model Airplane News, and was Comet's top designer from 1939 till 1945. After Comet, he worked with Mike Schlesinger and Sid Axelrod on what eventually became Top-Flite Models. In 1955 he founded Carl Goldberg Models and released a still-popular line of scale, rubber, gas, glider and RC models. Needless to say, Goldberg's models are of the highest quality.
Tamiya Ferrari F189 Early Version, 1/20, 20023
Plastic Model Kit, Box Condition: VG+
Sold
Excellent, high quality kit that is well detailed inside and out. Features removable cowling, complete engine and cockpit detail and driver figure. Molded in bright red, black, ivory/white and with rubber tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya Lotus Type 102B, 1/20, 20030
Plastic Model Kit, Box Condition: Exc
Sold
Highly detailed 1/20 static display model with removable cowling, detailed engine, interior and more. The kit has never been started. Internal factory sealed bag including decals and instructions.
ESCI Aermacchi MB-326 Trainer - Australian RAAF / Italian / Argentinian Navy and South African Decals, 1/48, 4063
Plastic Model Kit, Box Condition: Good-
Sold
Nicely molded kit with optional parts for A, B, C and D variants as well as decals for all four Air Forces. Features good cockpit detail, optional position speed brakes with well detail and a two piece canopy. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Airfix Beagle Basset 206, 1/72, 255
Plastic Model Kit, Box Condition: Exc
Sold
1960s issue of the famous light aircraft of RAF Transport Command. Features complete interior detail. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Juneco Scale Models 36' Truss rod Wood Reefer (Refrigerator Car) - Canadian Northern - Wood and Metal HO Craftsman Kit, 1/87, K-9
Wood and Metal Model Kit, Box Condition: VG++
Sold
Very high quality HO craftsman kit. This model builds a very accurate prototype and is made from the same primary materials as the actual car. Features precut and milled hardwood roof, sides and floor, prescribed hardwood sides and parts cut to size, metal and wood stock as required, a large number of metal detail parts, detailed full size plans with instructions and markings guide and markings for Canadian Northern 'Refrigerator Dressed Meat Service'. This kit is designed for full underside car detail - for advanced modelers only but well worth the effort. The kit has never been started. The small parts are still in the factory sealed bags, and the parts that were not sealed have been inventoried complete.