Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Sierra Friedrichshafen G-III Night Bomber - Bagged, 1/72, 72-09

Vacuform Model Kit

Sold   

Still factory sealed. Kit features superbly molded main vacuform parts of better quality than many injection molded kits, cast metal details and plans/instructions.

Otaki Alfa Romeo Coupe 33 - Motorized, 1/16, OT3-22-1500

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare. Large, well detailed kit. Features a super detailed engine complete down to the ignition wires with the all-metal gear box and transaxle completely hidden inside, electric motor hidden between the lower pan and floor that drives the transaxle through a shaft, opening hood, elaborate scale working suspension and steering, complete cabin with opening doors, real working headlights and tail lights, opening trunk and much more. Molded in ivory, chrome pate, black, silver, clear, red-tinted clear and with real rubber tires. All driveline items (motor, metal gear box, contacts, switch, light bulbs, etc) are included. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Merite 808-300 German Tank Officer 1943 / 806-250 Rogers' Rangers 1757 / 816-250 British 8th Army Infantry 1942 / 802-250 Green Berets US Army 1966 / 803-250 German Luftwaffe Paratrooper 1941 Metal Figures, 1/32

Metal Model Kit,   Box Condition: VG+

Sold   

Includes all five superbly detailed metal figure kits from the late 1960s. Each has a black plastic display stand. All boxes are 'very good+' and no kits have been started. They are all 100% complete including the display stand and instructions.

AMT Fruehauf FB 40 Foot Refrigerator Van / Trailer Reefer - Watkins, 1/25, T507

Plastic Model Kit,   Box Condition: Good

Sold   

Original issue from the 1970s. Measures nearly 20 inches long when assembled. Features opening door, fully detailed inside floor and side panels, four 'Spyder' spoke dual wheel assembled, rubber hollow tires, authentic refrigerator Unit with expansion tank and control boxes, detailed F-2 tandem suspension, real rubber air lines, two position front supports and authentic and colorful Watkins decals that are still in 'near mint' condition. The kit has never been started. NOTE: missing two tiny red marker lights. Otherwise inventoried with all other parts present including decals and instructions. NOTE: there are the typical tire burn marks on the top and one outer side.

Hasegawa Fieseler FI 156C-1 Storch - Rommel or Mussolini Rescue Plane, 1/32, 1141

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

SALE!! Big scale Storch that is still factory sealed but the seal has drawn the box top concave as shown and has split. Very highly detailed kit features figures, complete interior, highly detailed engine and firewall, removable cowling, optional position doors and wire landing gear. Includes decals for either famous aircraft and the splinter camo SB+UG.

Monogram Peterbilt 359 Conventional Semi Tractor Truck, 1/16, 2500

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare. Very large (1/16) truck from 1980. Very well detailed. This model builds up a rolling chassis just like the actual truck with complete engine, suspension, exhaust and drive line detail. Features detailed engine compartment, opening hood, 63 inch walk-in sleeper, complete interior with CB radio, Alcoa Alloy wheels, dual exhaust stacks, twin antennas, rotating 5th wheel, air horns and side mirrors, pinstripe decals, license plates and more. Molded in yellow, black, chrome, clear and with rubber tires. The kit has not been started. NOTE: Missing one #113 small cylinder which can be made from scratch. Otherwise inventoried with all other parts, decals and instructions present. NOTE: there are small to medium tire burn marks on the exhaust stacks, roof light pods, bottom part of the grill and fan shroud. None of the marks are severe.

MPC AV-8A Harrier - US Marines, 1/24, 1-4606

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal has splits. Very large model from Airfix molds. Highly detailed including full engine and cockpit, opening canopy, rotating thrust nozzles, real rubber tires and much, much more.

MPC Junkers Ju-87B Stuka Dive Bomber, 1/24, 1-4604

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed but the seal has drawn the box top concave as shown. Very large 1/24 scale kit from Airfix molds. Features removable cowling showing detailed Jumo engine and firewall, real rubber tires, working canopy and complete cockpit, movable control surfaces, choice of bomb loads and more.

AMT 1937 Cord 812 SC Supercharged Convertible Coupe, 1/12, 2424

Plastic Model Kit,   Box Condition: VG

Sold   

Early issue of this very large 1/12 scale detailed classic car model. Features super detailed engine, opening hood, full interior with removable top, opening doors, windows that crank up and down with the handles, full suspension and underbody details, vacuformed display base and rubber tires. Molded in clear, red tinted clear, chrome and yellow, black and tan plastic. Never started. All parts (but the clear, base and car body) are still in factory sealed bags (these were never factory bagged. Detailed instructions included. NOTE: missing one of the two red, round tail light lenses. There are tire burn marks on one flat side door glass. The burn are of only moderate depth and the clear is thick, so they may wet-sand and buff out (please see the article on this website on how to save and improve clear plastic parts).

Monogram USS Constitution with Sails - 30 Inches Long (ex-Imai Old Ironsides), 1/120, 3705

Plastic Model Kit,   Box Condition: Good++

Sold   

From 1981 and from excellent Imai molds. Model is 21 inches high and 30 inches long when assembled. Features one piece hull, detailed decks, fittings and cannon, preformed rat lines, rigging material, detailed rigging diagrams, beautifully done vacuform billowing sails and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (white plastic) have been inventoried complete including decals and instructions. Please NOTE that one small top crosstree is broken but all parts are present. Also the davits on the back hull are very neatly broken off at the base but also present and an easy repair.

Ambroid Winged Snow Plow Car - HO Craftsman Kit, 1/87, K-10

Wood and Metal Model Kit,   Box Condition: VG+

Sold   

From 1966. High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, an envelope of detail parts and full instructions and plans. The kit has never been started. It has been inventoried complete with all parts and includes instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Ambroid Reading 40 Foot Outside Braces Refrigerator (Reefer) Car - HO Craftsman Kit, 1/87, H-14

Wood and Metal Model Kit,   Box Condition: Exc+

Sold   

High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Ambroid D&H Delaware & Hudson 30 Foot Three-Way Caboose - HO Craftsman Kit - Build As Center Copula, Offset Copula or Modified 20 Years Later, 1/87, H-15

Wood and Metal Model Kit,   Box Condition: VG++

Sold   

Builds up any one of the three ways listed. High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, envelope of detail parts, extensive decals and full instructions and plans. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. If you have an interest in these highly accurate kits and the revolution they created in modeling, please read the article about their history located on this website.

Ambroid Olympia Beer 36 Foot Private Refrigerator (Reefer) Car - HO Craftsman Kit, 1/87, H-18

Wood and Metal Model Kit,   Box Condition: VG+

Sold   

High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Ambroid Denver & Rio Grande 40 Foot Vertical Ribbed Box Car - HO Craftsman Kit, 1/87, H-7

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Ambroid Sante Fe SFRD 'The Chief' Streamliners 50 Foot Wood Sheathed Refrigerator (Reefer) Car - HO Craftsman Kit, 1/87, H-8

Wood and Metal Model Kit,   Box Condition: VG

Sold   

High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Revell Russian Spy Fishing Trawler Volga, H379

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Dated 1970. Larger scale kit is almost 15 inches long when assembled. Features full hull, electronic surveillance gear, radar masts and antenna, full deck fittings and rails, large movable derrick, movable lifeboat davit, rudder and small cargo booms, whaleback and full toprails, searchlights and compass, two Russian Spy crew figures, Russian markings and display base.

Veron Aeronca Champion - 23 inch Wingspan Flying Model Airplane, 1

Wood Model Kit,   Box Condition: Exc++

Sold   

Veron models were made by Model Aircraft (Bournemouth) Ltd. In Bournemouth, Great Britain. Three of the product lines were 'Kwik-Fix' gliders, 'Super Truscale' (sold kits) and 'Tru-Flite' (stick and tissue kits). This Tru-Flite kit contains high quality printwood and strip wood, hardware, rubber, beautifully drawn full size plans, detailed instructions and plastic wheels, prop and thrust bearing. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Monogram P-51D (F-51D) Mustang Superkit Balsa/Plastic Model Airplane Kit - Bagged, 1/57, T1

Wood Model Kit,   Box Condition: No Box

Sold   

NOTE: bagged kit, no box. The box is shown for reference only. Very rare multi-media plastic and pre-carved wood kit. Before there were injection molded plastic kits, model builders worked in wood or metal. Advanced companies, like Monogram, saw the advantage of plastic and began marketing kits with plastic details and fully-carved fuselage, wings, etc. This beautiful kit is one the highest quality composite static kits from the early to mid 1950s. Includes finished wings with airfoil, completely carved fuselage, colored die-cut wooden parts, plastic canopy, pilot, wheel, prop, cowling, scoops, exhaust and more. The model has not been started. The plastic parts are still factory sealed in the krinkle bag. All the parts that were never factory sealed have been inventoried 100% complete with 'excellent' decals and instructions.

Scientific Flying Cloud Clipper Ship, 167

Wood Model Kit,   Box Condition: Good-

Sold   

Quality wood and metal model kit. Features pre-carved hardwood hull which needs very little final sanding to complete, two sheets of printed hardwood, one printed block of balsa, tapered and non-tapered mast and yard stock as required, a bag of metal and wood fittings, running and standing rigging material, color insignia and marking sheet, pre-carved hardwood display base, turned pedestal, mounting screws, metal name plate, ship history and instructions sheet and full size plans with detail drawings. Measures 13.75 inches long when assembled. The kit has never been started. The parts that were factory sealed (fittings) are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including markings and instructions.