Plastic Model Kits
Aurora Douglas M2 Mailplane - (M-2), 1/48, 111-98
Plastic Model Kit, Box Condition: VG
$62
First issue with classic Joe Kotula artwork dated 1957. The kit is a very good depiction of this rare mail plane and is molded in a beautiful burgundy, black and clear. Never started. Inventoried 100% complete with all parts, decals and instructions present. This aircraft has a fascinating history. From the internet: The United States Post Office had been running the air mail service since 1918 mainly using variants of the de Havilland DH.4 biplane. In 1925, it decided to modernize and placed an order with Douglas for a replacement aircraft based on the Douglas O-2 observation biplane. The company modified an O-2 by covering over the forward cockpit to make a mail compartment and moving the pilot into what had been the observer's cockpit. The aircraft was designated the DAM-1 (Douglas Air-Mail-One) but this was soon shortened to M-1. The M-1 used the same Liberty engine as the DH.4, which was available in large numbers. Small modifications were made to the exhaust system to keep fumes away from the pilot and the design was considered a success, but was not ordered into production. When the Contract Air Mail (CAM) routes were introduced, the newly formed Western Air Express Company (later Western Airlines) ordered six mailplanes with the designation M-2. The main change from the M-1 was that the tunnel radiator was replaced with a frontal type. It also had the provision to carry a passenger instead of mail in the front cockpit. Just before Western Air Express introduced the aircraft into service (in April 1926 from Los Angeles to Salt Lake City), the Post Office ordered 50 aircraft designated M-3 for its major route network. The M-3 had only detailed differences from the M-2.
Aurora F8U-1 Crusader - (F8 / F8U1), 1/48, 119-98
Plastic Model Kit, Box Condition: VG+
$120
Very rare first issue from 1957. This box art was used for only one year or less; then Aurora changed to the much more common 'ground' artwork. This model was a very good early effort by Aurora and features retractable landing gear, removable tail section, removable & detailed jet engine, pilot, 'fair' cockpit detail and more. Molded in the correct glossy light gray and clear plastic. Never started. Inventoried 100% complete with all parts, decals and instructions present. Everything inside is correct for this issue, including the 1st issue instructions, large clear rectangular-based stand and early decal sheet correctly lacking the stand decal.
Aurora Lockheed F-94C Starfire, 1/82, 495-50
Plastic Model Kit, Box Condition: VG
$42
Dated 1961. Dramatic Jo Kotula box art. The kit has never been started. Inventoried 100% complete including decals and instructions. The decals have some light damage affecting several of the transfers as they were once stuck to the instructions.
Aurora De Havilland DH-10 Bomber, 1/48, 125-198
Plastic Model Kit, Box Condition: NM+
$125
1957 original issue in amazing, investment-grade 'Near Mint+' condition. Very light wear is the only flaw. This is the first issue of this large scale (1/48) kit and part of the famous Aurora WWI series of 1/48 scale aircraft. The series began in 1956 and Aurora added new kits into the early 1960s. The line proved incredibly popular that these kits were included in the 'mold upgrade' in the 1970s before Aurora went out of business. Includes three crew, ground base and two ground crew. Molded in the correct gloss dark olive, black and clear plastic. Inventoried 100% complete with all parts, decals and instructions present.
Aurora Focke-Wulf Fw-190 - Famous Fighters Logo Issue, 1/47, 30-79
Plastic Model Kit, Box Condition: Sealed Mint
$175
Still factory sealed with the box in amazing, investment-grade "Mint" condition. The seal is 100% intact and the kit has no more wear than it left the assembly line. Dated 1960 and the first issue with this artwork. Note the 79 cent price extension and "Famous Fighters" in the border of the oval sunburst logo, which is unique to the 1960 release.
Aurora Russian Stalin Tank, 1/48, 303-98
Plastic Model Kit, Box Condition: Exc+++
$125
Rare first issue from 1956 with Northern Lights logo. The box is in beautiful "Excellent+++" condition with factory-new color & gloss and four solid corners. There is no fading, no stains, no tears or missing litho, no creases and no price tags or tag marks. It would have graded 'Near Mint' but there is a very small (11mmx 5mm) factory tape pull on the upper long side. Molded in the correct gloss deep green with flexible black treads. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Lindberg Russian Jet Fighter Mig-19 With Tow Tractor - Cellovision Issue, 1/48, 561-98
Plastic Model Kit, Box Condition: Sealed VG++
$94
Very rare. This is a factory sealed 1950s Cellovision issue. The clear window on the back is intact and the trading card is in 'Near Mint+' condition. Amazingly, the box is in 'very good++' condition. These Cellovision boxes were very thin and prone to damage; this one lived a charmed life. This is a large scale (1/48) 'theoretical' Mig-19. It was removed from production well before it's time because it soon became obvious that this aircraft never existed in this configuration. However, Aurora made one almost just like it; so it is believed that they both used the same faulty magazine drawing as the basis for both models. Includes a very well detailed tow tractor with driver. The aircraft is molded in silver and the tractor in yellow.
Lindberg FJ-2 Fury Jet Fighter - First Logo Small Box Issue, 1/48, 516
Plastic Model Kit, Box Condition: Good++
$74
From the mid 1950s with wonderful Ray Gaedke box art. Rare first issue that featuring the circular Lindberg logo and short, early two-piece box. Correctly molded in brilliant metallic blue with a red nose and clear canopy. Correct early decals and instructions. Please note, the instructions have the circle logo and the rectangular logo, which was not uncommon for early Lindberg kits. This kit has not been started. Inventoried 100% complete with all parts, decals and instructions. Paul Lindberg created plans for stick and tissue flying models that were published in popular modeling magazines in the 1930s. During this time, he marketed wooden flying kits, asking builders to request that your local dealer carry "The Lindberg Line" of models. When plastic kits first appeared, Paul Lindberg and a Mr. Olsen founded O-Lin models, purchased the unsuccessful Varney molds for the Fleet Sub, PT Boat, LST and PT-17. After mold modification, they entered production and quickly cut new molds such as the P-80, Seabee and more. The association with Mr. Olsen did not last long, and Paul Lindberg took over or bought out the molds, thus starting the famous plastic "Lindberg Line". The first box art was simply carry over from O-Lin. Early O-Lin artwork was simple and two -color. However, Ray Gaedke did some late O-Lin boxes such as the Corsair, which was also used by Lindberg. Gaedke artwork was colorful and bold, and Paul Lindberg wasted no time in having Gaedke make the new artwork for the Lindberg Line.
Lindberg Lockheed F-80C Shooting Star Cellovision Issue, 1/72, 426-29
Plastic Model Kit, Box Condition: Sealed VG++
$28
Still factory sealed. Early 1960s issue with Ray Gaedke artwork. The original molds were cut by Trim Model Products in the early to mid 1950s. Trim sold them in bags or in hardboxes, then sold the molds to Lindberg in the early 1960s.
Lindberg Douglas F4D-1 Skyray, 1/48, 523-98
Plastic Model Kit, Box Condition: Exc
$40
1950s issue with fantastic Ray Gaedke artwork. This kit features fine raised panel lines, moving rudder and wing control surfaces, complete jet engine with opening inspection cover, pilot, two drop tanks, under wing rockets and a clear display stand. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Lindberg F-80C Shooting Star - (P-80), 1/48, 500-98
Plastic Model Kit, Box Condition: NM
$62
1950s issue. The hardbox is in exceptional investment-grade "near mint" condition with fantastic color and gloss, four solid corners, no fading and no tears. Very slight wear (mainly on the corners) is the only flaw. Molded in the correct silver and clear with the early O-lin style teardrop-based stand. The kit has not been started and is complete with all parts, decals and instructions. Paul Lindberg got his start in 1930s model aviation by designing, building and flying stick and tissue aircraft. His plans appeared in Popular Aviation magazine and he soon made a name for himself. When injection molding showed the way to increased kit sales in the late 1940s/early 1950s, he quickly teamed up with Mr. Olsen to create 'O-lin' models. Ray Gaedke was one the the early artists for O-lin, and he help pioneer dramatic and colorful box artwork. In the early 1950s Paul Lindberg was running the company and had the logo changed to his name. The first logo was circular, with 'Lindberg' in middle and 'Products' 'Incorporated' arched across the top and bottom. The second logo is the 'Yellow Rectangle' that is on this kit. Ray Gadke continued his bold and colorful artwork for Lindberg and did this F-80C boxart as well.
Lindberg F-94C Starfire, 1/48, 519-79
Plastic Model Kit, Box Condition: VG++
$38
1950s early issue with the newer logo on the box top and the original round Lindberg logo on all four box top sides. The fantastic artwork is by Ray Gaedke. Molded in correct high gloss silver and clear. Never started. Inventoried 100% with all plastic parts present and instructions. NOTE: missing decals. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Revell Douglas A3D Skywarrior - S Issue - (A-3), 1/84, H241-98
Plastic Model Kit, Box Condition: NM+
$145
First issue dated 1956 and in amazing, investment-grade 'Near Mint+' condition. The classic artwork is another example of why these Revell 'S' issues so famous and valuable. The box has perfect color and gloss The only things keeping it from being mint is very slight and isolated wear. Features folding wings and horizontal stabilizer, rotating and elevating rear gun turret, optional position landing gear, speed brakes & escape hatch, three crew figures and more. Includes the famous clear Revell 'Globe' stand. Never started. It has been inventoried complete with all parts and includes decals and instructions. Instructions are in 'excellent+' condition and the decals are 'near mint.'
Revell USS Boston Guided Missile Cruiser 'S' Issue, 1/480, H334-169
Plastic Model Kit, Box Condition: Good+
$179
Very rare original issue hardbox from 1956. This is a nice model and well detailed for that time, featuring full hull (not waterline), detailed deck and superstructure, separately molded and moving main armament, Terrier missiles, launcher and directors and more. Never started. Inside, it is as it left the factory. The small parts are still sealed in the internal clear bag; the large parts that were never sealed have been inventoried complete and includes the correct large-format flag sheet, decals and instructions. The USS Boston, originally CA-69 (Baltimore Class Heavy Cruiser) was converted to the world's first Guided Missile Cruiser in 1952.
Monogram Boeing 2707-200 SST United Airlines, 1/400, PA211-100
Plastic Model Kit, Box Condition: Good-
$64
This is the 1968 release of this kit, which may have only been issued twice. The Boeing SST was modeled here in the second (-200) variant which still had the swing-wing design which proved impractical in this aircraft. The damaging effects of sonic booms over population centers ultimately contributed to the cancellation of the project. Nicely molded with all recessed panel lines. The kit has wings that swing, United Airlines decals and a unique display stand. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions.
PST PMZ-2 (ZIS-6) And PMZ-2 (ZIS-42) Fire Truck, 1/72, 72047
Plastic Model Kit, Box Condition: VG
$28
SALE!! Includes two kits. The ZIS-6 variant is never started and the parts are still in the internal factory sealed bags and includes instructions. The ZIS-42 is never started and inventoried complete with all parts and instructions present. Very highly detailed models that features a rolling chassis build just like the actual truck, complete driveline, engine, full interior and all firefighting equipment.
Revell M-4 Sherman Tank - (M4), 1/40, 8304
Plastic Model Kit, Box Condition: Sealed NM
$32
Still factory sealed. 1982 issue of this all-time classic "S" kit from 1956. From the original molds and makes the perfect 'Classic Builder.' The model features movable tracks and suspension, opening hatches, elevating gun, rotating turret and tank commander & two soldiers 'Set For Action.'
AFV Club USN Guppy IB Class Submarine SS Leonardo Da Vinci Italian Navy, 1/350, SE73512
Plastic Model Kit, Box Condition: Exc
$34
This superb kit features many photoetched details, new tooling hull, superstructure and conning tower for an accurate Guppy IB. Can be built full hull or waterline and the pressure hull is included. Diving planes can be built in extended or retracted position. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Decals are for hull numbers 510 and 511.
M News TWO NA-73 P-51A Mustang 1 - RAF or USAAF, 1/72, MN72003
Plastic Model Kit, Box Condition: VG
$32
SALE!! Includes two kits in the one box shown. Kit #1 is never started and still in the factory sealed bags; includes decals and instructions. Kit #2 is never started and inventoried complete with all parts, decals and instructions present. Features all fine recessed panel lines, 'good' cockpit, injection molded canopy, all optional parts to correctly build either version, some gear well detail and more. Includes decals for either version.
Merlin Models deHavilland Vampire T.11 Two Seater, 1/72, 17
Plastic Model Kit, Box Condition: VG
$18
Quality limited run injection molded plastic kit with all recessed panel lines and finely cast metal details. Never started. It has been inventoried complete with all parts and includes decals and instructions.