Trumpeter Grumman F9F-2P Panther, 1/48, 02833
Plastic Model Kit, Box Condition: Exc
Sold
Finely molded with 124 pieces, all recessed detail, excellent cockpit and gear wells, detailed recon nose, optional position canopy and speed brakes, separately molded wing flaps, optional folded or 'flight' position and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa General Dynamics F-16A Fighting Falcon Tiger Meet 1991 - Royal Netherlands Air Force 313 Squadron, 1/48, V103
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Very highly detailed kit. Features all fine recessed panel lines, detailed cockpit and wheel wells, special decals and more.
Aoshima 1997 Infinity Q45 - Luxury Sedan 'Cima' With Right or Left Hand Drive, 1/24, 018620
Plastic Model Kit, Box Condition: VG
Sold
Very nicely detailed kit. Features left and right hand dash panels, rotating wheels, detailed suspension and driveline, full exhaust, complete interior and more. Molded in black, gray, clear and chrome and with rubber wheels. The kit has never been started. Internal factory sealed bags including decals and instructions.
Revell Supermarine Seafire, 1/32, H294
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed, but the seal has splits on the right short side. 1969 issue. Has many action features - canopy slides to show fully detailed cockpit, wheels and prop rotate, retractable landing gear, removable cowling shows finely detailed Rolls Royce Merlin engine and more.
Sterling British SE-5 Scout - 40 inch Wingspan Scale RC Airplane, FS22
Wood Model Kit, Box Condition: Good-
Sold
Very large full-scale kit. Even the rib spacing in the wings and tail is correct, as is the stringer spacing of the fuselage. The only exception to scale is the modern airfoil cross section. Designed for R/C or control line with a .19 to .29 gas engine and measures 30.5 inches long with a 40 3/8 inch wingspan. Highly detailed. Features all die-cut sheet wood parts of very high quality balsa, numerous plastic details and metal radiator parts, wood and metal stock as needed, dowels, blocks and cut to shape wood, a great deal of hardware, three huge full color decal sheets and superb full size plans with instructions on them. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I personally considered Sterlings to be 'deluxe' kits.
Tamiya USS Fletcher DD445 Destroyer, 1/350, 78012
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Full hull, highly detailed kit.
Revell 707 Flagship American Airlines 'S' Issue, 1/139, H246-98
Plastic Model Kit, Box Condition: Good-
Sold
Hard-to-find 1958 first release with classic box art. The model represents the 707 in the initial configuration - Turbo-Jet (not fan) engines, and short, early rudder shape. Molded in gloss silver and includes the clear 'Revelving Swivel Stand.' Never started. Inventoried 100% complete with all parts, decals and instructions. The box has creases as shown.
Jo-Han 1964 Dodge Super Stock, 1/25, GC-2864
Plastic Model Kit, Box Condition: VG++
Sold
1960s issue. NOTE: builder kit only, please read carefully. Includes decals for 'Re-Charged', s/s hood, detailed engine with two 4 bbl carburetors, dual quad manifold, s/s exhaust headers, M&H cheater slicks, front drag tires and dual electric fuel pumps. Features engine compartment detail and firewall, opening hood, complete interior and chassis detail. Molded in white, clear, red-tinted clear, chrome and with rubber tires. Chrome is excellent. NOTE: The engine block halves, heads, manifold, oil pan and fan/pulleys have been assembled (in other words, everything except the chrome parts). Quality of assembly is excellent. This assembly has been painted with only fair quality; but it can simply be painted over. NOTE: missing distributor cap and side windows. I have included clear, thin plastic for making these flat windows. The front windshield has a section at the far upper right broken out; the broke piece is present and fits perfectly back. Inventoried with all other parts, decals and instructions.
Gabriel 1930 Packard Dietrich Convertible Victoria - (ex Hubley), 1/22, 4863
Metal Model Kit, Box Condition: Good
Sold
In the 1930s Packard was the style leader in America and a beautiful, fast status symbol. Packards were not the most expensive, but were the most desired cars. The 1930s Packards are seen as the high point of the brand. This model has 140 parts and is from the original quality Hubley molds. Builds to a very realistic model since the largest parts that were metal on the car are also so on the model. Well detailed and includes metal body parts, chassis, hood, engine and other detail parts with injection molded details, clear parts and a large tree of chrome plated parts. Features full rolling chassis construction just like the real car, very good suspension, steering and exhaust detail, complete engine with flexible radiator hoses, removable hood, working worm-gear steering, full interior detail and a clear, thin windshield. Never started. All the parts that were factory sealed are still sealed; the parts that were never sealed (the large metal ones) have been inventoried complete. With instructions and decals.
Hubley 1932 Chevrolet Deluxe Sport Roadster, 1/20, 4862
Metal and Plastic Model Kit, Box Condition: Good
Sold
From the 1960s/early '70s and one of a series of very popular and desirable scale metal and plastic kits by Hubley. Features excellent and detailed cast metal body, frame, hood, rumble seat cover, engine, suspension and more, injection molded wire wheels, interior seats, a large tree of chrome plated parts, rubber tires, whitewalls, decals, full rolling chassis build-up with engine, exhaust, suspension and driveline just like the real car, removable hood, opening rumble seat, complete interior, aft trunk (luggage) rack and more. Never started. All the parts that were factory sealed are still sealed; the parts that were never sealed (the large metal ones) have been inventoried complete. With instructions and decals.
Campbell Quincy Enginehouse - HO Scale Craftsman Kit, 1/87
Multimedia Model Kit, Box Condition: VG+
Sold
Excellent model featuring precut wood, metal, plastic and other parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Hasegawa Kugisho P1Y2-S Kyokkoh (Frances), 1/72, CP2
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. Hard-to-find special version. Dated 1996 and has 72 pieces.
Fador 1909 Hupmobile Roadster, 1/16
Wood Model Kit, Box Condition: VG
Sold
Dated September of 1949 with drawings by 'JFM.' Very well detailed for that time. Features a large number of die-cut, machined and saw cut wooden parts as well as excellent plastic wheels, grille, steering wheel and lanterns. There are also metal parts, metal stock and die-cut cardstock parts. Includes full-size, superb fold-out instructions with multiple elevation drawings, numerous detail drawings and templates, a photo of the completed model and extensive instructions. The kit has never been started. Inventoried with all parts present. Fador was another maker of big 1/16 classic cars and competed with the bigger Hudson Miniatures. Fador called the line 'Smallersters' and the design & parts breakdown of the kits are very similar. The full name was Fador Mfg. Company and the address was 501E. Clinton St., Elmira, NY. Hudson Miniatures, launched in 1948, apparently beat Fador to the market by at least a year or more. Hudson's national success probably lead Fador to choose the same subject (antique cars) and in the same scale, 1/16. Hudson snatched up the most obvious classic automobiles for kit subjects, forcing Fador to select very carefully. Fortunately, they chose well and they are still the only models ever made of these subjects. There is no record of Fador making any plastic kits; the introduction and overwhelming popularity of the Revell/Gowland Highway Pioneers and the models that quickly followed probably drove them out of the market. This was the fate of most wooden kit manufacturers who did not make the transition. In 1949 the Fador line consisted of a 1909 Hupmobile Roadster, 1904 Cadillac Runabout, 1905 REO 4 Passenger Runabout and one kit that was "3 In 1' - it made one of the following: 1909 EMF Single Rear Seater, 1909 EMF Touring or EMF Roadster. The Baker Electric kit was introduced in 1950 and possibly others as well.
Aeroclub 9 Cylinder Wright J-5 Whirlwind Engine and Prop, 1/72, EP017
Metal Model Kit, Box Condition: VG
Sold
Precision metal castings. Contains engine and prop. Much greater detail than injection molding. Never used and complete.
Accurate Miniatures US WWII Aircraft Armament With Ground Support Equipment - Tractor/Tug / Bomb Cart / Bombs Of Various Sizes / Rockets / Torpedo / Depth Charges, 1/48, 9900
Plastic Model Kit, Box Condition: Exc+
Sold
Includes everything shown with 111 pieces and extensive decals and full instructions. Never started with all parts still factory sealed. Instructions are printed on the bottom of the box.
Hasegawa Kawanishi N1K1-Ja Shinden George Type 11 Koh, 1/48, JT89
Plastic Model Kit, Box Condition: NM
Sold
Beautiful kit with 87 parts, all fine recessed panel lines, full, detailed cockpit, detailed engine and gear wells, optional position canopy and combat flaps as well as a drop tank and decals with paint guide for three different aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Fujimi Battle of The Bulge Diorama Set No. 1 Tiger II / Sherman / Troops / Base / Trees, 1/76, 700
Plastic Model Kit, Box Condition: Exc
Sold
Rare and desirable complete Diorama Set. In addition to the two tanks, German Troops, accessories, base, terrain (hills) and trees, there nicely illustrated diorama instructions and a sheet with color photos of completed dioramas.
Hasegawa McDonnell Douglas F-18 Hornet - (F/A-18 Prototypes #1 and #2), 1/32, S23
Plastic Model Kit, Box Condition: Good
Sold
Hales's of England European issue with a beautiful full-color painting guide and two large decals sheets. Very large-scale kit of the early prototype F-18. Features 120 parts, detailed cockpit and ejection seat, optional position canopy, detailed gear wells and optional position landing gear, speed brakes and arresting gear, two AIM-9 Sidewinder missiles, two AIM-7 Sparrow missiles and a very extensive decal sheets for aircraft #1 and #2. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The decals are still factory sealed and in 'mint' condition.
Revell Mig-29 Fulcrum - Luftwaffe / DDR / Czech / Soviet, 1/32, 4799
Plastic Model Kit, Box Condition: Fair
Sold
From 1990. Large and well detailed kit featuring all fine recessed panel line detail, very good cockpit with optional position canopy, detailed gear wells, excellent inlet and exhaust, extensive air-to-air weapons loadout, detailed radar and opened or closed nose and more. Includes a very large decal sheet for all four versions. Never started. Inventoried with all parts, decals and instructions present. The box has damage as shown, but all the parts inside are in excellent condition as is the decal sheet and instructions also.
Revell Grumman F-14A Tomcat - VF-124 'Fightertown USA', 1/32, 4770
Plastic Model Kit, Box Condition: Good-
Sold
Very large scale kit. Nicely detailed with all fine recessed panel lines, functioning swing wings, latest TCS optical nose, latest ECM fuselage blisters, detailed cockpits, operating canopy, AIM-54 Phoenix, AIM-7 Sparrow and AIM-9 Sidewinder missiles, detailed landing gear and low-vis markings. The kit has never been started. One set of mainly small parts are still in the sealed bags. The parts that were not factory sealed (mainly larger parts) has been inventoried complete including decals and instructions.