Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Pavla Supermarine S6B / S6A Racer, 1/72, 72060

Multimedia Model Kit,   Box Condition: Good

Sold   

Beautifully done limited issue kit. Features injection molded main parts with fine detail, numerous resin parts, clear canopy, beaching dolly / display stand, rigging diagram and paint guide and decals for three different aircraft. The kit has never been started. The resin parts are still in the factory sealed bags. The injection molded parts have been inventoried complete including decals and instructions.

Eduard FW-190 A-8 Cutting Edge Cockpit / Aires Wheel Bay / Eduard PE Detail Set - For Hasegawa Kit, 1/32

Multimedia Model Kit,   Box Condition: Exc

Sold   

Includes all three detail sets that have not been used and are 100% complete: Cutting Edge #CEC32031 FW-190A-8 Super Detail Set, Aires #2039 Wheel Bay for FW-190A-8 (instructions say 1/48, but it's not. The wheel bay is 5 inches across!) and Eduard #32-522 PE Interior Detail Set. All three are designed for use with the Hasegawa 1/32 scale kit.

Monogram Fairchild A-10A Thunderbolt II Warthog, 1/72, 5405

Plastic Model Kit,   Box Condition: Good

Sold   

1977 issue. Kit features boarding ladder, pilot, optional position engine inspection cover with detailed engine, complete cockpit, opening canopy, internal gun, 6 laser guided bombs, 18 additional bombs and an external fuel tank. Very finely molded and detailed kit with traditional high Monogram quality. NOTE: this kit has minor painting. Interior surfaces have been neatly airbrushed gray. Quality of painting is excellent. There is no other painting and no assembly. Inventoried 100% complete with all parts, decals and instructions.

Formaplane Nieuport 12 French WWI Two Seat Fighter, 1/72, C24

Vacuform Model Kit,   Box Condition: Good

Sold   

Excellent vac kit with moldings that are better than many injection molded models. Features full interior, very fine detail, clear window material and airfoil strut stock material. Never started and complete with all parts and instructions.

Revell Lockheed 1049 Super Constellation Varig - Kikoler Issue, 1/128, H158

Plastic Model Kit,   Box Condition: Good++

Sold   

Rare Brazil Kikoler issue with Varig markings. The kit is from the same molds as the 'S' issue. Includes colorful decals in 'excellent' condition. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Before using any older kits decals, please see the articles on this website about saving and using old decals.

Inpact 1910 Bleriot, 1/48, P101

Plastic Model Kit,   Box Condition: Fair

Sold   

Released in association with the 20th Century Fox production of 'Those Magnificent Men in their Flying Machines' movie. Very nicely molded kit with excellent details including engine, fuel tank, cockpit and more. Fabric surfaces are realistically recreated with an accurate and subtle pattern. A clear stand is included and clear wheels to better simulate the spoke versions of the period. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Pyro Avro Biplane 1911 - ex-Inpact, 1/48, P605

Plastic Model Kit,   Box Condition: Good

Sold   

From the mid 1960s. Beautiful kit of this early subject. Excellent detail and finely molded. Wings and control surfaces have realistic fabric texture. Full cockpit and engine with gasoline/oil tanks. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Lindberg F-86D Sabre Jet Fighter - with First Logo, 1/48, 522-98

Plastic Model Kit,   Box Condition: Good++

Sold   

Very rare first Lindberg issue with the 'script' logo. From the 1950s with dramatic Ray Gaedke artwork. Molded in high gloss silver and clear. Includes script logo decals and box logo instructions which was not unusual. The box was originally numbered 522-79 and has been over-stamped with a factory '98' for the price. Lindberg always used up any old stock and never seemed to waste any boxes, parts, decals or instructions. Paul Lindberg's consistent year-to-year bottom line profits are testimony to this. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Monogram TWA Super G Constellation - Four Star Issue, 1/131, P19-98

Plastic Model Kit,   Box Condition: VG+

Sold   

1st issue. First issues are kit number #P19; the second issue looks identical but has kit number PA19. Well detailed kit features two hostesses, two loading ramps, tip tanks, battery truck and full TWA decals. Molded in correct white, silver and clear. Never started. Inventoried complete with all parts, decals and instructions present.

AMT 1949 Ford Custom Club Coupe - Stock or Custom - Bagged, 1/25, 6805

Plastic Model Kit,   Box Condition: Bagged

Sold   

This came from the estate of a very particular builder/collector who kept the clear and chrome parts in separate bags, keeping them in 'as new' condition. Very nice kit. Features choice of engines - stock Ford Flathead V-8 or Cadillac V-8 with 3x2 or blown and fule injection. There is an engine stand for the engine that you do not put in the car. The hood opens and the engine compartment has good detail as well. Nicely molded chassis with separately molded front and rear suspension, control arms, rear shocks, dual or single exhaust and optional traction bars. Has a full stock interior or custom version with bucket seats, floor shifter, fire extinguisher, moon fuel tank, aux. gauges and custom wheel. There is a choice of stock or racing tires and various custom exterior treatments - optional grills, hood scoops, roof scoop, nerf bars, antennas, spotlights, fender skirts, tail lights and more. Molded in light gray, chrome, clear and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Blue Rider Junkers J-2 - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Bagged

Sold   

Possibly the only model ever made of this landmark aircraft. Features excellent vacuform moldings of higher quality than many injection molded kits. Includes cast metal details, extruded airfoil strut material, decals and full cockpit. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The J-2 was aerodynamically the cleanest and elegant aircraft every produced at the time of the first flight in July 196. Only 6 were built and only two in the configuration of this kit. Unfortunately, too much emphasis was put on aerodynamic cleanliness and the aircraft was over-weight. The direct descendants of this aircraft are the Junkers D-1, Ju-52 transport and Ju-87 dive bomber.

Esoteric Boeing F3B-1 Fighter 3, 1/72, NAF-12

Vacuform Model Kit,   Box Condition: Bagged

Sold   

The F3B was a complete redesign of the less successful F2B-1. F3Bs began to replace F2Bs only a few months. The US Navy ordered 74 F3Bs and they served from 1928 till 1931. The aircraft was very popular with crews, so it continued in use for many years after it left squadron service. While flying as a 'hack' aircraft, they acquired wheel pants and Townend cowl ring - these parts are also included in the kit. Esoteric was known for production perhaps the finest vacuform kits. The mold quality is higher than most injection molded kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with metal parts - decals - shaped struts and full instructions. Never started and 100% complete with all parts, instructions and decals.

VLE Models Fokker T-2 Army Non-Stop Coast To Coast Flight - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Bagged

Sold   

Very accurate and high quality model of the very first aircraft to fly nonstop across North America. The flight was sponsored by the US Army and took off on May 2, 1923 and landed 26 hours and 50 minutes later. I highly recommend reading a history of this flight, the previous attempt and preparations. It is a credit to the Army Air Service, the pilots and the design of the aircraft. Kit features very fine moldings, metal and resin details, and full color decals for the Coast to Coast Aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Esoteric Martin BM-1 / BM-2 Torpedo Bomber - Bagged, 1/72, NAF-10

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. Esoteric was known for making perhaps the finest vacuform kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with many metal parts - full decals - shaped struts and full instructions. The BM-1 was the follow-on to the Martin T4M as the XT5M-1. The BM-1 and BM-2 were externally identical and 32 of each were produced. They remained in front line service until 1937. Some remained in the utility role until 1940 when the last ones were scrapped.

Esoteric Vought O3U-3 / SU Corsair Two - Bagged, 1/72, NAF-11

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. The O3U-3/SU was developed from the O3U series and was a significant improvement over the first Corsair. Seventy-six were produced as -3s and served as observation/float planes for the battle fleet. Sixty-five of the -SU variants were produced and saw a variety of rolls with the Navy and Marines. This was Vought's last production biplane and it was loved by crews. They were taken out of fleet service in 1941 but served in various rolls before being scrapped during mid-WWII. Esoteric was known for making perhaps the finest vacuform kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with metal parts - decals - shaped struts and full instructions.

Palmer Chevrolet Corvette Sting Ray Motorized, 1/32, 1110

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Easily adapted to slot car racing. Kit includes car body molded in red, details molded in silver, rubber tires, electric motor, metal hardware, electric motor and decals. The instructions are under the car.

Naval Works Flower Class Corvette, 1/700

Resin Model Kit,   Box Condition: VG+

Sold   

Waterline resin small-scale ship kit. Older but still nicely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes illustrated instructions.

Regia Marina Navigatori Class Destroyers / Luca Tarigo / Lanzerotto Malocello / Leone Pancaldo / Antonio Da Noli / Ugolino Vivaldi etc, 1/700, RM06

Resin Model Kit,   Box Condition: Exc

Sold   

Hard-to-find. Features excellent resin waterline cast hull and many cast resin details. The instructions name all the ship in the class, have an excellent assembly illustration and include dazzle camo schemes. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Regia Marina Capitani Romani Class Light Cruiser Attilio Regolo / Scipione Africano / Pompeo Magno, 1/700, RM13

Resin Model Kit,   Box Condition: Exc

Sold   

Hard-to-find. Resin waterline kit with very good detail, extensive illustrated instructions and an extensive camo paint guide for the three ships listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Lindberg North Atlantic Fishing Trawler - (Ex-Pyro and Life-Like), 1/96, 70898

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. From quality ex-Pyro molds dated from the early 1960s. Large 17" kit when assembled. Very well detailed for it's time with railings, detailed deck and fittings, rigging thread and detailed rigging diagrams.