Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

MRC Bell 47D MASH Helicopter - MASH TV Show / Gunship / US Marine Utility, 1/35, BA102

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Large scale kit that is highly detailed. Features correct tube fuselage frame, complete Franklin 6 cylinder engine, one piece clear bubble canopy, excellent cockpit, pilot figure, stretches (litters) with windscreens and more. Includes optional parts and decals for the MASH version from the TV show, a light gunship variant and a Marine utility helicopter.

Robbe Norderney Survey Ship With 1036 Fittings Set - 49 Inches Long For R/C Or Static Display, 1/25, 1035

Wood and Plastic Model Kit,   Box Condition: VG

Sold   

Very rare, and even rarer with the important fittings kit. This was Robbe's flagship model and was around $800 with the optional ship's fittings kit which is included. This full-scale model is designed for radio control operation with two props and rudders and provides great maneuverability even in rough water. The beautiful and huge hull is one piece molded ABS plastic and all other parts are pre-fabricated (die-cut) of wood and plastic. Includes hull, mast, funnel and small parts, die-cut decks, superstructure and crane parts, die-cut main frames and deck beams, clear glazing, double rudder system, R/C fitting set with tillers and pushrods, 35mm diameter screws, rubber rubbing strip, rails, anchor winch parts, optional fittings set and more. This example is never touched. It has not been started and all the parts are still exactly as the factory shipped them. The ones that were sealed are still sealed and the few that were not have been inventoried complete. With all plans/instructions. Unless you specify otherwise, this kit will be shipped in the huge and sturdy original box with paper covering the identification label and photo. If you choose to have it boxed again, extra shipping will apply. Please note, this may not ship to other countries who have size limited on postage because the box is 52.3 x 18.2 x 14.2 inches. Must be shipped insured.

Aurora Wheeler Cruiser Sports Fishing Yacht, 1/43, 444-500

Plastic Model Kit,   Box Condition: Good

Sold   

Very rare kit with great box art by Mort Kunstler. This is the first issue dated 1967. Aurora did a beautiful job on this model, but it simply did not sell and was discontinued very shortly. The high price of $5 USD and the esoteric subject matter were likely to blame. This is a large-scale model with excellent detail and molded in white, medium wood tan, medium blue and chrome plate. Features a one piece hull, propeller and rudder detail, one piece main deck, venetian blinds for the larger interior windows, extensive deck fittings which are all separately molded, all hand rails (in chrome), dinghy with interior and oars, spray shields, display stand, 5 figures and more. The kit has never been started. The blue part are still in the factory sealed bag. All other parts have been inventoried 100% complete. Includes instructions and decals. The chrome plating in in 'as new' condition. Please note that the box has light wear, age foxing and one split corner at the lower right which has been duct taped.

Top Flite P-40E Warhawk Gold Edition - 64 Inch Wingspan RC Aircraft, TOPA0120

Multimedia Model Kit,   Box Condition: VG

Sold   

Very large scale Radio Controlled kit. Features 90% balsa sheeting, most parts formed to shape, CAD engineered wood parts with interlocking construction, precision formed ABS details and the ability to accept a wide number of options (not included) such as retracts, flaps, super detailed cockpit, etc. The kit has never been started and is factory new inside. All small parts are still factory sealed. All other parts are still in the factory rubber band bundles and have been inventoried complete including decals, excellent instructions and plans. NOTE: unless you specify otherwise, the kit will be shipped in the box shown. There will be an additional charge to pack and ship it in another box.

Nitto Hanomag Sd.Kfz 250/3 - With Cargo Wagon and Crew - German Half Track, 1/35, 15091

Plastic Model Kit,   Box Condition: VG

Sold   

Very nicely molded and well detailed kit. Features detailed interior, optional position crew door, flexible tracks, metal axles, rubber tires, three figures and numerous accessories and decals with paint guide for three different half tracks. The model as never been started. The parts are still in the factory sealed bags with decals and instructions.

Hasegawa McDonnel Douglas F-15E Dual Role Fighter - Operation Desert Storm, 1/48, P21

Plastic Model Kit,   Box Condition: Good

Sold   

Limited edition. Very highly detailed kit featuring 320 pieces, all fine recessed pane line detail, excellent dual cockpits, two positionable pilots, optional position canopy, boarding ladder , realistic intake and exhaust, optional position speed brake, detailed gear wells, a wide variety of drop tanks, bombs and air-to-air missiles, very large decal sheet and full color painting guide. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell USS Constitution Old Ironsides - With Sails, 1/96, H398

Plastic Model Kit,   Box Condition: Good

Sold   

Dated 1976. Very large (1/96) scale model of the famous American Frigate. Features full deck and much interior detail (gun deck, captain's quarters), all rigging line and thread, pre-formed ratlines, full instructions for building and standing and running rigging, and optional billowing sails. Never started. All parts are still sealed in factory bags and the kit is complete with all bags, clear window material, flags, preformed ratlines, rigging guides, sails and all instructions. Sails in are slighter better than average condition; I would grade them "good+" with some of the typical wear.

Revell Supermarine Spitfire Mk1 - RAF No. 610 Squadron County of Chester, 1/32, H282

Plastic Model Kit,   Box Condition: VG

Sold   

Dated 1971. From the original 1967 molds in large 1/32 scale. Has many action features - canopy slides to show fully detailed cockpit, wheels and propeller rotate, retractable landing gear, removable cowling shows finely detailed Rolls Royce Merlin engine and more. Never started. inventoried complete with all parts, decals and instructions present.

Master Modelcraft Supply Co Bell King Cobra P-63 - De Luxe Issue, 1/48

Wood Model Kit,   Box Condition: Exc

Sold   

From about 1944. This is a deluxe solid wood model in big quarter scale. Features a beautiful, completely carved hardwood fuselage, two cut-to-shape balsa wings, profile cut tail feathers, cast metal four-blade propeller, fully formed rubber wheels, vacuform canopy (still clear and not yellowed), wood and metal stock as necessary, color insignia sheet and very large full-size plans that include stabilizer, wing and wing cross sections, aircraft description and spec and even text instructions. Never started and complete. Master Modelcraft Supply Company made wooden model aircraft and ships and listed their address as N.Y. 66, New York during the early 1950s.

Monogram F-82 Twin Mustang - F-82E / F-82G - Heritage Edition Issue, 1/72, 6063

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. 1984 issue. Has parts and markings for both day and night fighter version.

Imai Catalan Ship - 15th Century, B295

Plastic Model Kit,   Box Condition: Good-

Sold   

NOTE: builder kit only, not collectible. Please read carefully for the condition. Very large and well detailed model that measures 530mm x 300mm x 420mm. Full hull kit is molded in wood brown and includes cast metal anchors, all rigging material and furled sails (not billowing like the box art). This kit has never been started. The parts that were internally sealed at the factory are still in their factory sealed bags. The few that were not appear to be present. NOTE: this kit is missing the instructions, which means that while I think it is complete, I cannot confirm it. So the kit is sold 'AS-IS' only. If there were billowing sails, they are missing. Also, if there was a flag sheet, it is missing. There is no paperwork present.

Frog Martin 167 Maryland - Reconnaissance Bomber 'Nantes' GBII/20 Free French North Africa 1941/42 or South African 24th Sqn No.3 Wing Desert Air Force 1941/42- Green Series, 1/72, F241

Plastic Model Kit,   Box Condition: Good++

Sold   

1970s 'Green Series' issue which includes a color painting guide and decals for both aircraft. Well molded for that time and contains no rivets - just fine panel lines. Features rotating turret, crew of three and some interior detail and optional position landing gear. Includes decals for Free French 'Nantes' GB II/20 North Africa and South African 24 Sq No 3 Wing North Africa. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.

Revell Supermarine Spitfire Mk1 - 610 Sq County of Chester, 1/32, H282

Plastic Model Kit,   Box Condition: Fair+

Sold   

Dated 1971. From the original 1967 molds in large 1/32 scale. Has many action features - canopy slides to show fully detailed cockpit, wheels and propeller rotate, retractable landing gear, removable cowling shows finely detailed Rolls Royce Merlin engine and more. Never started. inventoried complete with all parts, decals and instructions present.

MPC 1969 Pontiac Bonneville Convertible - Stock or Custom Pickup Version, 1/25, 1069-200

Plastic Model Kit,   Box Condition: VG

Sold   

Very rare first and only issue. Features parts to build the stock convertible (top down with a boot) or the custom pickup hardtop version with a clear bed cover. Features detailed engine and compartment, opening hood, full interior, driveline and suspension, soft vinyl seat cushions, numerous custom parts, narrow whitewall rubber tire and even accessories including opening tool box, harpoon gun, scuba tanks, mask, fins & more. Molded in white, vinyl, clear, red-tinted clear, chrome plate and with rubber tires. There is no assembly but NOTE: the one-piece chassis is very neatly spray-painted black. Quality of paint is 'excellent++.' There is no other painting. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals. NOTE: the custom pickup bed has two tire burns. The stock passengers floor has a very small and very light (easily fixed) tire burn.

Revell Magnum PI Vanagon - TC Island Hoppers Van, 1/24, 7328

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Rare 1982 original and only issue that used the very popular "Magnum PI" TV series as a tie-in. TC's van was often used in conjunction with Magnum's current investigation - and often at TC's protest and consternation. Features detailed chassis, very good engine and suspension, removable engine hatch, removable roof, sliding side door, opening rear door, detailed interior, Firestone SS Radial rubber tires and more. Includes full decals with red and yellow stripes, 'Island Hoppers', 'Magnum PI' or 'Helicopter Charter Service' markings. Molded in dark metallic brown and tinted clear and with rubber tires.

AMT AMC 1975 Gremlin X - Stock or Drag Racer Versions, 1/25, T451

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Rare original issue and not the modern, common reissue. Features parts to build one of the two versions listed, detailed engine and compartment, opening hood, detailed chassis, full interior and more.

AMT 1965 Riv Lowrider - Buick Riviera Cruisin USA George Barris Custom, 1/25, 2262

Plastic Model Kit,   Box Condition: Exc

Sold   

1980 Barris custom issue that is detailed inside and out featuring a complete 425 Nailhead V8 and engine compartment, opening hood, detailed underside with exhaust and suspension, complete interior, chrome parts, rubber tires, special decals and even special front fender reflective stick-ons as shown on the build box top model. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Guillows Boeing B-17G Flying Fortress - 45 Inch Wingspan Flying Aircraft, 1/28, 2002

Wood and Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed but the seal has splits at the lower left and left short side. This versatile model is perhaps the largest B-17 available (at 1/28 scale) and can be built as a static scale display model, or with gas engines for U/Control and could be modified to fly on modern small electric motors and remote control. Features all moving control surfaces, plastic cowlings and fairing, plastic regular tail gun or Cheyenne tail gun, optional position main gear, retracting tail wheel, removable wings, plastic turrets and many other clear or colored plastic panels and parts.

Hobby Craft Canadair CT-114 Tutor Snowbirds - With JBOT Decals, 1/48, HC1426

Plastic Model Kit,   Box Condition: VG

Sold   

Includes JBOT 1/48 CT-114 Tutor NATO Colours 50th Anniversary decal set in mint condition and includes the markings guide. The actual kit is the very rare 1/48 scale issue. Features all recessed panel lines, good cockpit detail and decals for the Snowbirds. Never started. It has been inventoried complete with all parts and includes 'mint' condition decals and 'excellent' instructions.

Aurora Curtiss SBC-3 Helldiver, 1/48, 117-98

Plastic Model Kit,   Box Condition: Exc

Sold   

From 1961 and from the original 1955 molds. This is a fine model for that time, featuring movable control surfaces, very good cockpit and engine detail, bomb load, drop tank and two crew members. Includes the clear triangle-based 'world' stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.