Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Renwal Bleriot 1909 Monoplane and Kitty Hawk 1903 Biplane, 1/72, 234-100

Plastic Model Kit,   Box Condition: Exc

Sold   

Hard to fine early 1960s hardbox issue which includes both models. The Wright Brothers Kitty Hawk was the first aircraft to make powered and controlled flight, and the Bleriot Monoplane was the first aircraft to fly over the English Channel. These are unique and accurate kits. The original internal frame structure and details of the aircraft are built from injection molded plastic. When complete, it is covered with a very strong fabric which is included. The result is a very realistic aircraft. The models have never been started. All parts for both aircraft are still sealed in the original factory bag. Includes covering tissue, instructions and Testors's covering glue glass bottle.

LS THREE BD-5J, 1/72, A193

Plastic Model Kit,   Box Condition: VG+

Sold   

SALE!! Includes three BD-5 jet kits in the one box shown. Two of them are never started and inventoried complete with all parts and includes decals and instructions. The third kit is NOTE: there is minor assembly done to 'professional' standards: the fuselage halves are assembled. There is no other assembly. Inventoried complete with all parts, decals and instructions present. One of, if not the smallest injection molded airplane kit ever made. From very high quality LS molds. Includes full decal pin-striping, clear canopies.

AMT Junkers Ju-88 G-1/G-6 Nightfighter - II/NJG 5 or NJG 2, 1/72, 8897

Plastic Model Kit,   Box Condition: VG+

Sold   

Finely molded and well detailed model with over 100 parts and features all fine recessed panel lines, very good cockpit detail, enclosed wheel bays in the nacelles, complete dual row BMW 801 1,700hp engines, complete radar antenna, MG151 Cannon belly pod, upward firing 20mm Schrange Musik cannon and more. Includes decals and parts for both versons. Never started. It has been inventoried complete with all parts and includes decals and instructions.

MPM Fokker T-VIII w/G - Dutch / RAF / Luftwaffe Versions, 1/72, 72080

Plastic Model Kit,   Box Condition: Exc+

Sold   

High quality limited production kit. Features recessed panel lines, resin details, photoetched details and full decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Airfix Grumman TBM-3 Avenger - Craftmaster Issue - CV-10 USS Yorktown or CV-20 USS Bennington, 1/72, 1301-70

Plastic Model Kit,   Box Condition: Sealed NM++

Sold   

Still factory sealed and in investment grade 'Near Mint++' condition. In this dramatic Craftmaster artwork, Zeros press in close to score hits on a formation of TBMs as Avenger gunners score back. This model features elevating gun, rotating turret, three crew members, moving ailerons, all correct clear windows, optional position landing gear, underwing rockets and decals for both aircraft listed.

Academy Grumman TBF-1 Avenger - USN, 1/72, 1651

Plastic Model Kit,   Box Condition: Exc

Sold   

From 1987. A nicely molded kit that features all fine recessed panel lines, detailed cockpit, optional position landing gear and rotating turret with elevating gun. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram 1959 Cadillac Eldorado Seville 2 Door Hardtop, 1/24, 2463

Plastic Model Kit,   Box Condition: VG+

Sold   

Monogram is still renown for their Classic Car line which was started around 1965. In the 1990s they picked right back up where they left off and created several very high quality new car kits; this is one of those. The Eldorado Seville is from 1995 and is finely molded and highly detailed. Features 153 pieces, excellent 390 CID Cadillac engine with 3x2 carb set up, detailed engine compartment down to the A/C pressure & return hoses, clear washer bottle, tri-power air cleaner, air-ride suspension pump & reservoir and cruise control unit, opening hood with realistic hinges, full interior with clear door light lenses, very good chassis with separately molded complete exhasut, air suspension bags and control arms, differential, shock absorbers, stabilizer bar and drive shaft and more. Includes stick on real metal, die-cut trim for the side stainless trim. Molded in light metallic blue, metallic charcoal, white, clear, red-tinted clear, chrome plate and rubber parts. Never started and inventoried complete with all parts and includes instructions.

Monogram 1930 Packard Model 734 Boattail Speedster, 1/24, 2301

Plastic Model Kit,   Box Condition: VG

Sold   

1995 reissue of this superb 1970s model. The Packard Boattail is part of Monogram's incredibly successful and popular 1/24 series of Classic Cars which had its first releases in about 1965. Very highly detailed and well molded featuring full rolling chassis build just like the full-size car, steering and rear axle detail, detailed engine, removable hood, full interior, removable soft top & boot and more. Molded in the two body colors shown on the box top and white, chrome and clear and with rubber tires. The kit has never been started. The brown and white parts are still factory sealed; all other parts were never factory sealed and have been inventoried complete with the instructions present.

Matchbox Hawker Fury I - RAF or Yugoslav, 1/72, PK-1

Plastic Model Kit,   Box Condition: NM+

Sold   

Still in factory-new 'mint' condition. Dated 1983 and a finely molded kit with decals are for No. 43 Squadron 1930s or Royal Jugoslavia Air Force and a very nice color painting guide on the back of the box. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

ERTL Ribber Duck Convoy Mack Truck - From the Movie Convoy, 1/25, 8036

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed and very rare in this condition. This kit was issued as a tie-in to the hit movie 'Convoy' and depicts the famous 'Rubber Duck' call sign truck. Features over 275 pieces, rolling chassis construction like the actual truck, massive 'Bull Bar' front bumper, twin CB antennas, roof-mounted air deflector, complete 672 CID Maxidyne 6 Cylinder Engine, detailed cab & sleep with complete interior, opening hood, full suspension and underside details and more. The kit has never been started. Almost all parts are still in the factory sealed bags; some parts were never factory sealed (cab, tires & clear) and those are inventoried complete. Includes decals and instructions. Includes instructions and decals (in amazing 'mint' condition) as well as International four-page flyer for this semi.

Bandai Russian Medium Tank T34/76 - (T-34/76), 1/48, 057373

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Rare 1/48 scale kit from the classic and highly detailed Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be assembled in almost any position.

JB Models THREE LWB Landrover With Soft Top, 1/76, 1

Wood Model Kit,   Box Condition: Good

Sold   

SALE!! Includes three complete kits in the one box shown. #1 is still factory sealed inside. #2 and #3 are never started and inventoried complete with all parts and includes decals and instructions present.

Anigrand North American XB-28 Dragon, 1/72, AA2068

Resin Model Kit,   Box Condition: Exc

Sold   

Very nicely detailed model featuring all fine recessed panel lines, good cockpit, full decals and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. In 1939, the USAAF issued requirement for a new medium bomber which could operate at high-altitude to avoid attack from ground fire. Martin and North American responded with the requirement, Martin submitted the Model 182 which was redesigned from the B-26 Marauder, and North American proposed NA-63 which was based from the B-25 Mitchell. In 1940, North American's design was chosen to entry the development, and was received contract for two prototypes that designated XB-28. The first prototype made its first flight on April 1942, and was proved an excellent design, with significantly better performance than the B-25. However, USAAF changed the requirement and rejected the XB-28 project as it was to be found that high-altitude bombing was too susceptible to errors caused by wind, cloud cover. The second prototype was completed as the XB-28A reconnaissance version. At the same time, most medium bombing during the war was done successfully from low altitudes, and it was decided not to interrupt Mitchell production for an untried type, the XB-28 project was canceled.

Bandai Cowboy Beebop Sword Fish II - (Swordfish II Spike Spiegel), 1/72, 0077174

Plastic Model Kit,   Box Condition: Exc+

Sold   

Rare model that is well molded and detailed. Includes the Sword Fish II fighter with many action features and the three figures shown on the box top in very large scale (probably bigger than 1/24; Spike is a full 3 inches tall). Molded in red, black, clear and ivory. Never started and the parts are still in the internal factory sealed bags and includes instructions. If you know Japanese, Bandai has included a fold-out, illustrated story of Cowboy Bebop.

Aurora Convair VR XFY-1 Pogo, 1/48, 60-98

Plastic Model Kit,   Box Condition: Exc

Sold   

Final issue box design from 1957 to the final year in 1959. Please note that the factory eliminated the old rectangular logo with a yellow triangle and put the new 'Famous Fighters' oval logo in the center. The box is in very nice 'Excellent' condition with like-new color and gloss, no price tags or tag marks, no tape or tape marks (not even factory tape marks!) and four solid corners. Flaws include very light corner wear and a very light crease at left and light impact damage on the upper short side. Rare, large scale model features working counter-rotating props and is molded in gloss silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The decals are 'very good++' with the only flaw being the typical yellowing and the instructions are also 'very good' with edge wear to the lower side.

Lindberg 32 Pick-Up Rod - Customized 1932 Pick Up Truck, 1/24, 603-69

Plastic Model Kit,   Box Condition: Exc

Sold   

This kit is from 1963 but is in the wrong box. The box top has been cut out and put on another box. This model is one of Linberg's better efforts and features a detailed V8 engine with 6 carb stacks, firewall, removable hood, rear differential & front suspension, very good interior, bed cover, exhuast stack and more. Molded in white and clear plastic and includes decals for the box art truck. Never started and inventoried complete with all parts and includes decals and instructions.

Verneuil 1905 Panhard Tonneau Roi Des Belges - Europe Model Kits, 1/32

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare and well detailed kit of this historic automobile from the time when France clearly lead the automotive world in technology and quality. This happened largely because the French people, government and authorities embraced the horseless carriage; this was the opposite of what happened in most countries, especially Great Britain where they regulated it almost completely out of existence. Includes 86 parts in black and clear plastic, large fold-out, heavily illustrated instructions with painting guide, history and text assembly instructions in both French and English. Never started and the parts are still in the internal factory sealed bags and includes instructions.

Verneuil Panhard Coupe de Ville 1895 - Panhard et Levassor Coupe - Europe Model Kits Issue, 1/32

Plastic Model Kit,   Box Condition: Good

Sold   

The 1895 Panhard has earned a place along side the innovators and forerunners of the first modern cars. Rare kit of this historic automobile from when France clearly lead the automotive world in technology and quality. This happened largely because the French people, government and authorities embraced the horseless carriage; this was the opposite of what happened in most countries, especially Great Britain where they regulated it almost completely out of existence. Nicely detailed and molded with 50 parts in black and clear plastic. Includes large fold-out, highly illustrated instructions with painting guide and automobile history in French. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. After initially acquiring a license to produce the Daimler gasoline engine, Panhard made engines for fledgling car makers. However, it was not long before Panhard and Levassor decided to produce their own vehicles. Following production of rear-engined vehicles, in 1891 they standardized what would become the norm for car design for decades to come: front-engined, with a front-mounted radiator, driving though a sliding-mesh gearbox to the rear wheels. It was called 'Systeme Panhard.' In 1894 Panhard developed a very modern clutch and for the 1894 Paris–Rouen Race, Alfred Vacheron equipped his 4hp with a steering wheel; it is believed to be the first use of such. In 1895, 1.2-litre Panhard et Levassor vehicles finished first and second in the 49-hour Paris–Bordeaux–Paris race, with one being piloted solo by Levassor himself. During the 1896 Paris–Marseille–Paris race, Levassor was seriously injured in a crash. He died in Paris in 1897.

Flyline Models Kinner Sportster - 39 inch Wingspan for R/C Or Free Flight Or Static Display, 1/12, 106

Wood Model Kit,   Box Condition: Good

Sold   

Museum quality scale model in large 1/12 scale. Very large kit for RC or built for static display. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans, instructions, high quality printed balsa sheets, printed balsa nose blocks, stringer and spar stock, clear material for the windshield, decals, hardware and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Anigrand Republic XF-103 Thunderwarrior, 1/72, AA-2020

Resin Model Kit,   Box Condition: NM

Sold   

Very highly detailed model cast in high-definition resin. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.