Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Key Imports 2-8-0 Consolidation C-18 #318 HOn3 Brass Locomotive and Tender Samhongsa - Weathered, 1/87

Metal Model Kit,   Box Condition: Exc+

Sold   

Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. The original re-tinted clear plastic protective sheets and all three factory red foam parts are present and in 'excellent' condition. The small parts are still in the factory sealed zip lock bag. Under 14x magnification, the drive wheels show the tiniest bit of wear, most likely from the Samhongsa run. The factory paint and lettering is in outstanding condition. The model has been 'very lightly weathered' to professional standards as shown in the photo. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present.

Key Imports Rio Grande Southern 2-8-0 Consolidation C-17 #42 HOn3 Brass Locomotive and Tender Samhongsa - Weathered, 1/87

Metal Model Kit,   Box Condition: Exc+

Sold   

Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. All three factory red foam packing parts are present and in 'excellent+' condition. The drive wheels show that this locomotive has been run many times; it is not in 'mint' or 'new' condition. The factory paint and lettering is in very good condition. Please this model has been 'moderately weathered' to professional standards as shown. Other than the addition of two scale crewmembers, I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." The Key Imports data sheet for this kit is present.

Key Imports D&RGW 2-8-0 Consolidation C-19 #346 HOn3 Brass Locomotive and Tender Samhongsa, 1/87

Metal Model Kit,   Box Condition: Exc

Sold   

Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. The original re-tinted clear plastic protective sheets and all three factory red foam parts are present and in 'excellent+' condition. Under 14x magnification, the wheels show that this locomotive has been very lightly run -perhaps 2 or 3 times. The factory paint and lettering is in outstanding condition. The model has been 'very lightly weathered' to professional standards as shown in the photo. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." The Key Imports data sheet for this kit is present.

Key Imports Colorado & Southern C&S 2-8-0 Consolidation B-4E #71 HOn3 Brass Locomotive and Tender Samhongsa - Weathered, 1/87

Metal Model Kit,   Box Condition: Exc+

Sold   

Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. The original optional metal 'pipe' part that was supplied with the kit is present and has never been attached. The original re-tinted clear plastic protective sheets and all three factory red foam parts are present and in 'excellent' condition. Under 14x magnification, the wheels show that this locomotive has been very lightly run -perhaps 2 or 3 times. The factory paint and lettering is in excellent condition. Please this model has been 'moderately weathered' to professional standards. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present.

United Denver South Park & Pacific DSP&P Mason Bogie 2-6-6T HOn3 Narrow Gauge Brass Locomotive, 1/87

Metal Model Kit,   Box Condition: NM+

Sold   

From 1966 and part of a rare, limited production run. Even rarer in investment-grade condition inside and out; please read carefully and examine the photos as you may know more about this engine that I do. Beautiful, like-new condition brass narrow gauge locomotive, hand-built in Japan by the famous United Scale Models. The original box is in amazing 'near mint+' condition. Inside, the model is still wrapped in the original plastic that is printed in blue with 'UNITED' and their logo. All of the internal packing material is present and perfect - the two pieces of 'sponge' material, the foam cutout and the original internal white cardboard spacer. This one-owner model has always been carefully stored in the original box. Under 14x magnification I cannot see but the slightest wear on the wheels, so I would grade it as 'never run' although it was probably test run at United before shipping. I can see no missing parts, but again, please check the photos and ask questions. There is nothing broken but one small link and rod has come off; this is easily repaired. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present. Must be shipped insured.

Diamond Models 2-4-4T Brass Locomotive HOn3 Narrow Gauge, 1/87

Metal Model Kit,   Box Condition: Exc

Sold   

Beautiful, like-new condition brass narrow gauge locomotive made by hand in Japan. The original box is in 'excellent' condition and the model is still wrapped in the original plastic and all three pieces of the factory foam are intact and in 'near mint' condition. This one-owner model has always been carefully stored in the original box. Under 14x magnification I can see some wear on the wheels; he did run this locomotive, but not a great deal. I see no broken parts and no modifications; it looks factory-new. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present.

Huma Model DFS-346 Supersonic High Speed & Altitude Reconnaissance, 1/72, 4002

Plastic Model Kit,   Box Condition: Exc+

Sold   

Rare injection molded kit. Features fine, all recessed panel lines, cockpit module, prone pilot, landing skid, markings for Luftwaffe and USSR versions and full instructions with fascinating history notes. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The DFS-346 was to piggy-back launch from a Do-217 and then operate at up to 100,000 feet and supersonic speeds where enemy interception was impossible. The pilot's pressure cabin could, in an emergency, be blown free with four explosive bolts. After the separated front module reached a safe altitude where the pilot could survive without oxygen, the pilot was ejected and a parachute deployed. Power was two Walther HWK 109-509 rocket engines. The Western Allies searched for this aircraft after the war but failed to find it; later they learned that the Soviets had captured the prototype and had used German technicians under Russian supervision to build and test this aircraft (and modified new prototypes) right after the war as the "Samolyot 346."

Trumpeter Two US Navy Aviation Sets / 12 TBF Avengers / 12 F6F Hellcats / 11 F4U Corsairs / 12 SB2C Helldivers / 8 B-25 Mitchells, 1/700, 03418

Plastic Model Kit,   Box Condition: Exc

Sold   

Includes two sets with the exact number of each type as shown in the title. Very highly detailed with all recessed panel lines and individually molded props and landing gear. Molded in clear. Please note it is short one F4U but adds 8 B-25s. Includes full instructions (on the back) and no decals.

Microscale TF-14 Bright Blue Trim Film FS151187 / TF-21 NYC Gray Trim Film FS26314 / SuperScale TR-1 White Trim Film Decals

Cardstock Paper Model Kit,   Box Condition: Exc

Sold   

Includes all three solid color decal sheets in near mint condition and fresh from climate controlled storage. Each measures 7 x 4.75 inches.

Action Products Submarine

Wood Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory tape sealed. Not a scale model but a 14 inch long wooden kit of a generic military submarine. Excellent for children.

Tamiya Heinkel He-162 A-2 Salamander, 1/48, 61097-2400

Plastic Model Kit,   Box Condition: NM

Sold   

Dated 2006. Very finely molded and detailed. Features all fine recessed panel lines, excellent cockpit, detailed gear wells, highly detailed removable jet engine and dolly, pilot figure, optional position canopy and decals for several aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Airmodel Bolchowitinow BI-1 Rocket Powered Aircraft, 1/72, 40

Vacuform Model Kit,   Box Condition: NM

Sold   

Nicely molded kit with recessed panel lines. In white and clear plastic with instructions/plans. Never started. Complete with all parts and instructions. Vac kits are only recommended for experienced modelers and some scratchbuilding may be required.

Fotocut German Spandau Machine Gun Kit - Two Guns, T66

Metal Model Kit,   Box Condition: Sealed Bagged

Sold   

Very highly detailed gun set in 1/72 scale. Includes parts for two guns. Still factory sealed.

KPM Mig-3, 1/72, 1

Vacuform Model Kit,   Box Condition: Sealed Bagged

Sold   

Very high quality molding with fine recessed detail. Never started and complete. These are 1978-79 Iron Curtain kits from the old Czechoslovakia and make for interesting modeling history. The makers of these kits went on to produce many of today's excellent limited edition offering from the Czech Republic such as MPM and others.

Monogram T-28D Fighter/Bomber With Black Box Cockpit and Squadron Canopy - Vietnamese or USAF Blue Box Issue, 1/48, 0121M0100

Plastic Model Kit,   Box Condition: VG

Sold   

Includes Squadron Crystal Clear Canopy #9628 1/48 T-28B (still factory sealed) and Black Box #48062 Trojan Cockpit and Conversion designed for this Monogram kit. Features full resin cockpits and T-28C conversion parts. It has never been started. NOTE: the resin cockpit is complete but the conversion is missing #19 small rear fuselage section. The actual kit is the 1994 reissue of the original kit. With many operating features. Canopy slides open, gear retracts, prop spins, and has instructor, student pilot and mechanic figures. The kit has never been started. Internal factory sealed bag including decals and instructions.

InterMountain Railway Company International Space Station, 1/144, ISS7001

Plastic Model Kit,   Box Condition: VG++

Sold   

Considered the finest ISS kit to date and superior to the Revell offering. This model is factory painted, lettered and decaled to professional quality. It has never been started. Every factory bag is still labeled and factory sealed. The few parts that were never sealed have been inventoried complete. Includes all of the extensive and comprehensive paperwork and instructions that came with this model.

Renwal 1966 Duesenberg Modern Classic Revival, 1/25, 103-198

Plastic Model Kit,   Box Condition: Good

Sold   

The idea behind Renwal's Revival Series came from the Detroit design team of Virgil M. Exner Sr. (the famous Chrysler designer) and his son, Virgil Jr. The famous design team, somewhat displeased with modern automobiles, started thinking about what the old time classics would look like today - if made by Packard, Mercer, Duesenberg and Stutz. Virgil Sr. and Jr. thus designed four modern classics and they were published in a national magazine - Renwal then began kit production of these four. The kit features a complete V-12 engine, engine compartment detail, removable hood and a complete interior. It is molded in gloss deep tan, gloss light tan, chrome, clear & red-tinted clear to minimize painting and includes rubber whitewall tires. The kit has never been started. Two sets of parts are still in the factory sealed clear bags. The parts that were not sealed have been inventoried and NOTE: missing one exhaust manifold (only visible when the hood is opened). Otherwise inventoried complete with instructions.

SMER Bristol Bulldog Mk.IIA - RAF Squadron 16Home Defense 1932-37 - (ex Inpact / Pyro), 1/48, 0812

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory 'round tape' sealed. From original Inpact (and later Pyro) molds. Very nicely molded with good details. Features full engine, cockpit and a very fine 'fabric' design where the real aircraft was cloth covered, a full color paint guide and decals for the colorful 17th Squadron aircraft shown.

SIG TWO Fairchild 24 Rancher - 36 Inch Flying Scale for Free Flight / Control Line / R/C Conversion, 1/12, FF-9

Wood Model Kit,   Box Condition: Good to Good-

Sold   

SALE!! Includes two kits but please read carefully. One kit is never started and complete. It features die-cut sheet balsa, factory-cut spar and stringer stock, formed wire landing gear and tail strut, fully finished main and tail wheels, full hardware pack, many factory-cut balsa parts and blocks, clear window material, covering tissue, decals and excellent full size plans. The second kit has never been started. It has been inventoried and NOTE: missing plans, wheels and hardware. Otherwise complete.

Hasegawa T-33A Shooting Star USAF Thunderbirds, 1/72, 123

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very nicely detailed but older kit. Has extensive detail sheet for Thunderbirds.