Revell F/A-18E Super Hornet - US Navy VFA-41 USS Nimitz BuNo 165861 or 165870, 1/48, 85-5519
Plastic Model Kit, Box Condition: Exc
Sold
From 2004. Excellent kit from newer molds with over 155 parts. Features all fine, recessed panel detail, excellent cockpit, optional position canopy, well designed intake and exhaust, detailed landing gear and gear wells, weighted tires, centerline external tanks and a variety of weapons. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Focke-Wulf FW-200C Condor - Japan Issue - KG40 (F8+DH) Bordeaux 1940 / SG+KR (Unit Unknown), 1/72, H204
Plastic Model Kit, Box Condition: Exc+
Sold
Rare Revell of Japan issue with unique box art. As with most Revell Japan issues, this one has additional decal choices. Includes markings for F8+DH and SG+KH. Has many operating features: movable control surfaces, rotating props, wheels and gun turrets and full crew. Never started. Inventoried 100% complete with all parts, decals and instructions.
MPM Messerschmitt Me-262 A-2a/U2 Bomber, 1/72, 72018
Plastic Model Kit, Box Condition: VG++
Sold
When working on the bomber version of the '262, Messerschmitt created two prototypes with glazed wooden noses housing a prone bomb aimer equipped with a Lotfe 7H bomb sight. These two aircraft, W.Nr. 110484 and 110555 were delivered around October 22, 1944. This model contains decals for both aircraft. Limited release kit. Features fine recessed panel detail, film instruments, two frets of photoetched parts and detailed interior. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Amodel Messerschmitt Bf-109F2 RZ65 - With Rauchzylinder Launchers - (Bf109 F2RZ65), 1/72, 7248
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Injection molded model of this unique '109 with missile housings built into the wings. These Rauchzylinders were also tested on Bf110, He111 and Me210 aircraft.
D&S Resin Me-109G (Bf-109G) - Experimental V-Tail (VJ-WC - werk no. 14003) Conversion, 1/72, C1
Resin Model Kit, Box Condition: Sealed
Sold
Rare cast resin conversion to make the V tail '109. Requires a base kit - Hasegawa 1/72 Bf-109G - to complete. Contains new aft fuselage section and rudders/elevators. Still factory sealed. Contains full and detailed instructions on the conversion and this unique aircraft. NOTE: rudders have warped, as is usual with fine, thin resin castings. You must be familiar with bending resin under hot water to make them straight again.
Eduard Polikarpov I-16 Type 10, 1/48, 8466
Plastic Model Kit, Box Condition: Good+
Sold
Features all fine recessed panel lines, very good cockpit detail and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Kajika Kongo 1914 - Early Imperial Japanese Navy Battlecruiser, 1/700, KM70001
Plastic Model Kit, Box Condition: Exc+
Sold
From 2016. Very finely injection molded kit that is highly detailed. This appears to be the Kongo in her near 'as launched' configuration in 1914. Please note that when you purchase this kit, you get much more than a model...you also receive a card inside from the manufacturer that says "We sincerely apologize for everything that makes you feel inconvenient." Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Fine Molds Kugisho D4Y1 / D4Y2 Judy, 1/48, FB1E
Plastic Model Kit, Box Condition: VG+
Sold
Dated 1999; well detailed an molded with all fine recessed panel lines, complete cockpit and crew stations, detailed gear wells and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Classic Airframes Curtiss Hawk III - Chinese Air Force Shanghai 1937 / Royal Thai Air Force 1940-41, 1/48, 434
Plastic Model Kit, Box Condition: VG+
Sold
Rare. Highly detailed with main injection molded parts and many resin details. Includes a full color paint guide and decals for both aircraft listed. Never started. Factory sealed bags with decals and instructions present.
Classic Airframes North American P-51H Mustang, 1/48, 426
Plastic Model Kit, Box Condition: Good-
Sold
Highly detailed plastic kit with many photoetched brass and resin detail parts. Never started. The parts are still in the internal factory sealed bags and includes decals, color painting guide and instructions. The decals have age foxing with 99% of it on the backing paper and not on the actual transfers.
AMT Peterbilt Cabover Pacemaker 352 Tractor Semi Truck, 1/25, T502
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed. This is an original issue with the finest mold quality; not a modern reissue. This super detailed truck has over 250 pieces and over 100 of those are chrome. Features a rolling chassis build-up just like the real truck, tilting sleeper cab, dual exhaust, fifth wheel assembly, hollow vinyl truck tires, fully detailed cab with air ride driver's seat, sleeper compartment and much more.
AMT Peterbilt 359 Semi Truck, 1/25, 6657
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed. Very highly detailed kit with 250 parts. Features a full rolling chassis build-up just like the actual truck, complete engine and engine compartment, detailed cab with complete interior, opening hood, full suspension and underside details and more
Top Flite Arrow Jet JIGTIME - 15 Flying Balsa Aircraft Rubber Or Jetex Powered, B4
Wood Model Kit, Box Condition: VG
Sold
Many companies tried to produce fully prefabricated flying model kits that would really fly. Of all these attempts, only Top Flite succeeded with the late 1950s 'JIGTIME' flying rubber free-flight model series. The Jigtime series were highly prefabricated 3D (not profile), all balsa models with no tissue. The tissue, rib and spar method was eliminated and it is built off of central jigs with all parts factory pre-painted with a colorful design. Includes 3D fuselage with die-cut sides, top & bottom all finished in color with insignia, panel lines and even rivets, completely finished wings with the correct dihedral and camber, finished tail feathers, clear plastic canopy, hardware, fully carved nose (that is also the thrust button), fully formed wire landing gear struts, finished wheels, plastic propeller, rubber motor and full instructions. Can be flown rubber free flight or Jetex free flight. The kit has never been started. It has been inventoried complete with all parts and includes instructions.
Sterling Real Sporty - 21 Inch Wingspan Flying Aircraft, Peanut, K-6
Wood Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. This is a well engineered, highly prefabricated model featuring all die-cut quality balsa parts, a large number of completely formed parts including fuselage sides, top & bottom, wing sheet covers, tail feathers, etc, finished wheels, plastic cowl & propeller, rubber motor, hardware set, vacuformed clear canopy, colored tissue, color decals, full size plan and separate teaching instructions sheet.
Dumas Curtiss SBC-3 Helldiver - 30 Inch Wingspan For R/C or Free Flight, 305
Wood Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed. Very large scale wooden kit with 30 inch wingspan. Perfect for rubber power, free flight or conversion to radio control. Features over 130 laser cut parts of hand-selected balsa, contest rubber and plastic propeller, vacuformed details, color decals, full size plan, hardware, lightweight issue and full step by step instructions.
Accurate Miniatures TBF-1C Avenger - Truk Lagoon Raid Feb 16 1944 USS Enterprise (CV6), 1/48, 3405
Plastic Model Kit, Box Condition: Sealed Good+
Sold
Still factory sealed. Very highly detailed and widely considered the finest 1/48 scale Avenger model. Features over 100 parts of excellent mold quality. Includes very highly detailed crew stations, excellent rear turret, full engine, separately molded rudder, detailed bomb bay with weapons load and optional position bomb bay doors, bomb cart, load-out, optional position pilots canopy and rear crew entry door and decals and paint guide for the listed aircraft.
Guillows Messerschmitt Bf-109 - 24 Inch Wingspan For Free Flight or R/C, 1/16, 401
Wood Model Kit, Box Condition: Sealed Exc++
Sold
SALE!! Still factory sealed. From the 1960s. Large scale, well detailed model that can be flown rubber free flight, gas free flight or converted to electric RC using modern small and light equipment. Well detailed with scale plastic wheels, plastic propeller, vacuform engine cowl and spinner, full color decals, colored tissue, die cut balsa parts, rubber motor, plywood firewall and excellent full size plans. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.
Trumpeter American LaFrance Eagle Fire Pumper, 1/25, 02506
Plastic Model Kit, Box Condition: Exc
Sold
A superb model featuring 326 pieces, a big fret of many PE details, rolling chassis build up just like the actual truck, full engine, complete front and rear suspension, driveline, exhaust, fuel tank, complete interior and more. Molded in white, clear, chrome plate and with rubber tires. Includes a large decal sheet for the box top truck and also enough letters and numbers to create almost any markings you can imagine. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Nitto M4-18T US Army 18 Ton High Speed Cargo Tractor, 1/35, 91
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but the seal has splits. Very nicely detailed and features 7 soldiers, swiveling and elevating machine gun, rotating bogies, flexible tracks and more.
Trumpeter RA-5C Vigilante - With Many Aftermarket Detail Sets, 1/48, 02809
Plastic Model Kit, Box Condition: VG+
Sold
Includes the following factory-sealed aftermarket sets: Cutting Edge CEC48486 RA-5C Vigilante Correction Set, Aires 4258 RA-5C Exhaust Nozzles, QuickBoost 48-553 RA-5C Ejection Seats With Safety Belts, Master AM-48-080 RA-5C Brass Pitot Tube and ADA Probe, Master AM-48-033 NATO Standard Refueling Probe and SuperScale International 48-1004 RA-5C RVAH-7 Decal Set. The actual kit is a beautifully molded, large scale RA-5C with 237 parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.