Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Falcon 10 French Navy, 1/48, VT105

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Very limited 1995 Marine Francaise issue. Large scale (1/48) and originally from the early 1980s. Features complete cockpit and interior and optional position passenger doors.

Hobby Craft Arado AR-234C With True Details Resin Cockpit & Wheel Set / Antares Ar-234 Jaeger Conversion Kit / Reheat Luftwaffe Rudder Pedals & Seat / Eduard Luftwaffe Seatbelts and Buckles, 1/48, HC1672

Plastic Model Kit,   Box Condition: VG+

Sold   

Includes the following aftermarket accessories: factory sealed True Details #48476 Ar-234 Cockpit Detail Set (a full resin cockpit), factory sealed True Details 48234C Wheel Set (2 mains and 1 nose), RARE Antares #ANT-06 Arado Ar 234B/B-2N Conversion Set to make the Ar-234 Jaeger (factory sealed), a partial Reheat WWII Luftwaffe PE sheet with more than enough rudder pedals and seats (2 types) for this kit and a partial Eduard WWII Luftwaffe seat belts PE fret with enough straps and buckles for this model. The kit itself is nicely molded with all recessed panel lines, very nice cockpit detail, external bomb load, auxiliary take off engines, drop tanks (mounted under the dual engine pods) and paint guide with decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Bandai Jagd-Panther Sd.Kfz.173 Tank Destroyer - (Jagdpanther), 1/48, 058260

Plastic Model Kit,   Box Condition: Good

Sold   

Rare kit from the classic and highly detailed Bandai Pin Point armor series. These kits are beautifully molded and features full interior with complete engines and crew stations, flexible treads, many operating features and well detailed crew members that can be posed in almost any position. Includes decals for you choice of tanks. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (the large ones) have been inventoried complete including decals and instructions.

Fujimi CV-2 USS Lexington Aircraft Carrier - Pre-Coral Sea Configuration, 1/700, WLA116

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very finely molded and highly detailed waterline model. This model includes the 8" gun turrets, which were removed before the Battle of the Coral Sea. Originally designed and laid down as a battle cruiser, the Lexington was converted to the 2nd aircraft carrier in the US Navy. Her battlecruiser speed was legendary and the four twin 8 inch turrets made her 'The Largest Heavy Cruiser Afloat.' After absorbing a great deal of battle damage in the Coral Sea in 1942, the Lady Lex had to be abandoned due to internal avgas explosions after the battle. The fully enclosed hanger deck, which was unique at the time, may have contributed to the fume build up.

Hawk Lockheed T-33A Chrome Plated - USAF / Canadian / West German Air Force, 1/48, 207-200

Plastic Model Kit,   Box Condition: Good+

Sold   

1967 issue with John Andrews box artwork. The plating is in 'above average' condition which means it is generally 'very good++' but does have some flaws. Includes a large decal sheet for all three versions. Never started. Inventoried 100% complete with all parts, decals and instructions.

Revell Panavia Tornado GR Mk 1 - RAF / Italy / Germany, 1/32, 4760

Plastic Model Kit,   Box Condition: Good++

Sold   

Large 1/32 scale kit. Very nicely detailed with all fine recessed panel lines, working elevator and swing wings and wing weapons pylons, complete cockpits, optional position nose with radome details, optional position speed brakes and landing gear, ECM, BOX 101 and AIM-9 Sidewinder missiles, MW-1, drop tanks and decals for the aircraft listed. This kit has never been started. The bag containing the smaller size parts trees is still factory sealed. The bag including the larger (fuselage and wing) parts was open, so I inventoried it and it is complete. With decals and instructions. NOTE: The very large decal sheet has been neatly cut on the dotted line into 3 smaller sections so it could be stored in a zip-lock plastic bag. The sheet was separated on the dotted lines - none of the decals are damaged.

Heller Republic RF-84F Thunderflash - Norwegian / Belgian / French Air Forces, 1/48, 556

Plastic Model Kit,   Box Condition: VG

Sold   

Rare kit of the recon version in larger scale. Includes paint guide and decals for all three aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Muir Models Inc Nevada City Fire Station HOn3 - HO Scale Craftsman Model, 1/87, 057

Wood and Metal Model Kit,   Box Condition: Good

Sold   

Highly detailed featuring pre-cut and scored hardwood, metal and numerous plastic details such as doors, window frames and railings. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The few parts that were not factory sealed have been inventoried complete including instructions.

Midwest 19th Century Skiff Rowboat Success Series, 1/12, 967

Wood and Metal Model Kit,   Box Condition: Exc+

Sold   

This is an ideal first plank-on-frame kit that is designed for the first time builder. If you are interested in small boat construction, this model is built the same way the real thing was made and is 1/12 of the size. Includes Micro-Cut quality basswood, mahogany and birch parts, complete fittings set, display stand, full size rolled plans and illustrated Success Series Construction Manual. Measures 8 5/8 inches long when assembled. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. There are other great kits in the "Success Series" as well and several levels you can work through. This kit is Level 1.

Revell Junkers Ju-88A-4 / Ju-88D-1 - Bomber or Reconnaissance Versions (Ju88A4 Ju88D1), 1/72, H113-130

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Factory sealed. Dated 1967 and in investment-grade 'Sealed Near Mint' condition. Kit features markings and parts for both versions, two position landing gear, removable cowling with detailed engines, bomb load and bomb racks and movable wheels and props.

KommanDeur Decals Wurger A& F / FW-190 A-8 (2 Aircraft) / FW-190 F-8 (2 Aircraft), 1/48, KD4805Fw

Cardstock Paper Model Kit,   Box Condition: Sealed NM

Sold   

Includes a full color paint and marking guide. This is a comprehensive decals for four different Butcher Birds from 12/JG Norway 1945, 2.1/JG301 German '45, SG10 or SG2 Neubiberg Germany Sept/Oct 1945 and White 48 W.Nr. 587108 unit unknown, Lippstadt Germany April/May 1945. Never used and mint condition. Always stored in a climate controlled environment. With markings guide.

Hasegawa Tornado IDS - German Marinefliger or Italian Air Force, 1/72, K30

Plastic Model Kit,   Box Condition: Good++

Sold   

From 1989. Very highly detailed kit from newer tooling. Widely considered the finest 1/72 scale Tornado kit produced. Features all very fine recessed panel lines, very good cockpit detail, wings that swing, detailed gear wells, two piece canopy, a large variety of under wing stores and decals for five aircraft from the two air forces listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Peck-Polymers Mitsubishi Zero - 13 inch Wingspan Peanut Scale Flying Model, Peanut, PP-9

Wood Model Kit,   Box Condition: Exc

Sold   

Peck-Polymers is a manufacture of high quality stick and tissue models. Kit includes contest quality printwood, nylon thrust bearing, colored tissue, full size plans and building instructions, plastic propeller and wheels and contest rubber. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including plans/instructions.

Modelcraft North American F-82E Twin Mustang, 1/48, 48-021

Plastic Model Kit,   Box Condition: Fair

Sold   

Unusual large scale Twin Mustang. Nicely detailed with 144 parts and decals for Colonel Cy Wilson's personal aircraft 'Ole 97.' Never started. The parts are still sealed in factory bags. Complete with instructions and decals for the box art aircraft. NOTE: the decals are flat and 100% intact but have slight lifting.

Tamiya Avro Lancaster BI/BIII, 1/48, MA120

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare. Very highly detailed large (1/48) scale kit. The kit has never been started. All parts are still in the internal factory sealed bags. Includes decals and instructions.

Gavia Polikarpov Po-2 LNB - Ambulance/Skis/Light Bomber - U-2 Ambulance Soviet Army / U-2LNB Polish Night Bombing Squadron 'Krakow' / U-2 1939 Soviet Army (Skis), 1/48, 004-0600

Multimedia Model Kit,   Box Condition: Good

Sold   

Finely molded kit. Well detailed with numerous photoetched parts and film instruments. Includes optional parts and decals for your choice of three different aircraft. The kit has never been started. Internal factory sealed bag including decals and instructions.

Midwest The Sharpie Schooner - 17 Inches Long Sucess Series Level 2, 1/14, 968

Wood and Metal Model Kit,   Box Condition: Good

Sold   

An ideal first wooden ship kits. Features wood sheeted-hull, full size rolled plans, "Illustrated Success Series" construction manual, Micro-Cut quality basswood and mahogany parts, cleanly pre-cut parts including frames, keel, transom , deck, cabin and side hull sheeting, complete fitting set with cottom sail material, rigging cords, blocks, cleats, cast brittania anchor, anchor chain, brass wire and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes plans and instructions.

AMT Styline 1961 Ford Thunderbird Hardtop - Stock or Custom with Restyling - With AMT Body Putty, 1/25, S221

Plastic Model Kit,   Box Condition: Good+

Sold   

Original hardbox issue; not a reissue. Can be built stock or a wild custom. Stock version features complete interior and swing-away steering column, detailed engine and engine compartment, opening hood, chassis detail and more. Custom version includes seat belts, tachometer, custom gauges, reel-to-reel tape deck, hood scoop 'teeth', fender mirrors, spotlights, chrome brake drum and jack stand, nerf bars, additional fins, fender skirt, custom tail lights, custom front and rear end pans and grills, upper and lower front scoops, a large sheet of decals and more. Molded in white, clear, clear tint red, chrome and with real rubber whitewall tires, metal axles and metal chassis screws. The kit has never been started. Inventoried and NOTE: custom side pipes, sandpaper, body putty and 'upholstery' sheet. Otherwise inventoried with all other parts, decals and instructions present.

Revell USS Constitution 22 Inches Long, 1/144, H362

Plastic Model Kit,   Box Condition: Good

Sold   

1969 issue of this famous intermediate size frigate. Features very good detail, injection molded ratlines, standing and running rigging material, rigging instructions, display stand and more. Molded in black and wood brown. Never started. Inventoried 100% complete with all parts, flag sheet and instructions present. Box displays better than the 'good' rating but is graded as such due to large tape tears on the two long sides.

AMT 1928 Ford Model A Tudor - Stock Or Racing, 1/25, 2128-150

Plastic Model Kit,   Box Condition: Good-

Sold   

Early issue with great box art. This is a well detailed model that can build one of two versions- a stock '28 Model A Ford or a drag racer with a 426 Ramcharger engine. Features detailed front and rear suspension & drive line, complete stock or race engine, removable hood, one-piece stock body, opening doors, full interior with folding seats, one piece fender and floor and a number of options for the race version. Molded in white, chrome plate, clear and with rubber tires. NOTE: this model has minor assembly. The rear differential assembly is built to 'excellent' quality. All of the wheels are assembled to the tires. There is no other assembly and zero painting. Inventoried and NOTE: missing one small part, a front suspension pin (easily made from sprue or stock round plastic.) Otherwise inventoried with all other parts present. With instructions and decals. One door is cracked but still complete.