Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell German 75mm Anti-Tank Gun With Crew And Italeri No.310 German Artilllery, 1/35, H2107

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

SALE!! Includes both factory sealed models.

Hasegawa 1966 Cadillac Coupe De Ville - Two Door Hardtop, 1/24, CB-1

Plastic Model Kit,   Box Condition: VG

Sold   

Rare kit from the 1980s. Features one piece body, complete interior, molded underside chassis detail, decals including dash instrumentation/radio/etc. and more. Molded in white, clear, chrome plate and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Fujimi Garage Tools, 1/24, GT2-1000

Plastic Model Kit,   Box Condition: Good

Sold   

An excellent kit including the following accessories for any 1/24 or 1/25 car: car lift, garage air conditioner, floor jack, engine hoist, engine cart, wall intercom unit, floor jacks, fire extinguisher, cord reel and flexible cord, wooden box, gas welding torch and two tanks w/lines, Electric (MIG style) welder with line, telephone, desk, office chair, big wheeled floor tool box, shelving unit (adjustable metal style), four wheel truck, work bench, smaller tool box, oil can, gas tank, bucket, camera, socket wrench box, 3 types of files, two types of screwdrivers, 2 types of wrenches, tire wrench, pliers, hammers, spanner, wire cutters, scissors, funnel, shock absorber, hand saw, files, oil can, coil springs, vice, electric drill, battery and carrier unit and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

ESCI Mercedes Benz 230G Feuerwehr, 1/24, 3023

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Nicely detailed kit with full frame assembly with separately molded driveline and suspension, detailed interior, accessory load shown on the box cover, optional position tail gates and more. Usually molded in red, clear, brown and black and with rubber tires.

ESCI Sd.Kfz 10 1 Ton Half Track with M-18 (M18) Howitzer, 1/35, 5008

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Very highly detailed and well molded kit features full interior detail, crew of five, optional canvas top, detailed howitzer and decals for three vehicles.

Airfix Mercedes 170, 1/24, 06413

Plastic Model Kit,   Box Condition: SealedExc

Sold   

Still factory sealed. Dated 1990 and is the only larger-scale kit ever made of this subject. Includes 87 pieces. The Mercedes 170 was built after WWII. Wwhile successful in it's own right, the line set the direction & standard for sedan development for the next several decades.

Tamiya 1966 Volkswagen 1300 Beetle, 1/24, 24136

Plastic Model Kit,   Box Condition: Exc

Sold   

Very well molded model features detailed engine with opening trunk lid, complete exhaust and suspension, detailed underside, full interior, opening front luggage compartment and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Matchbox Handley Page HP-58 Heyford Mk.III - Mk.I and Mk.II - With Cockpit Drawings, 1/72, PK605

Plastic Model Kit,   Box Condition: Good++

Sold   

Also includes Bob Wheelers superb cockpit detail drawings (one page). The Heyford was the last big biplane bomber to serve with the RAF and equipped 11 First-Line Squadrons at the time. The prototype first few in 1930 and had many novel features such as retractable ventral turret and the wing attached to the underside of the top wing for excellent visibility. It was soon nicknamed 'Express Bomber' due to it's ability to carry a large bomb load, fly at high speeds and be rapidly re-armed, serviced and repaired. Has parts and decals for all three variants from 102(B) RAF Sq. 1938, No. 99 Sq 1934 and No. 7(B) Sq. 1935. The kit has never been started. Inventoried 100% complete including decals and instructions.

Revell Curtiss Tiger Shark P-40B - USAAF / RAF / Chinese Flying Tigers - (ex Monogram), 1/48, 85-5209

Plastic Model Kit,   Box Condition: VG+

Sold   

This 2011 reissue of the original Monogram Four Star kit makes a perfect "Classic Builder" because it is molded in the original colors and even has a beautiful reproduction of the original decal sheet as. Very nice kit features detailed cockpit, movable landing flaps, optional position landing gear and one piece or three piece canopies, and decals for USAF, Flying Tigers and RAF versions. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Roger B Taney Coast Guard Cutter - (ex USS Campbell), 1/301, 85-3015

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. 2010 reissue from the original 1950s USS Campbell 'S' kit molds. The box art is the same as the 1975 Taney release. Like almost all of Revell's early ship models, this one is full hull, well molded and has very good detail.

Revell Buick Century Customizing Kit, 1/32, H1230-129

Plastic Model Kit,   Box Condition: Good+

Sold   

Original one-and-only hardbox issue dated 1958. Will build a stock 1956 Century or a wild custom with 78 different customizing accessories such as turtle fins, mirrors, spotlights, hood scoops, side stacks, 'shark' fender fins, continental extension kit, antennas, 8 disc and bumper bullets, fender skirts and more. Molded in a stunning high-gloss burgundy with chrome parts and with the clear windshield material from Revell. Never started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: one vent window (which is molded into the left interior side panel) is missing 2 of 3 sides. It broke and the parts are missing. Original sprue is included as you could use pulled sprue to reconstruct it. The right side vent window is complete to use as a guide.

MPC Pilgrim Observer Space Station Nuclear, 1/100, 9001

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Rare 1970s original issue; not the common reissue. Still factory sealed but the seal has shrunk and drawn the box top slightly concave. This offering from MPC is one of the most interesting and a classic among Science Fiction kits. The model dates from 1975. Large 1/100 scale kit is 17 inch long, has excellent detail and a large clear section to show interior detail. Fourteen movable parts allow you to display or change the ship's configuration from "Launch" to "Earth's Atmosphere Entry" to "Space Cruise". Also contains complete 'technical' flight data, a report on the NERVA Nuclear Engine and an iron-on shirt transfer. There was a time when space research was not aimed at the earth's orbit and moon, but at distant planets in our solar system and eventually beyond. Planning went much further than most people are aware. The main limitation was seen as the chemical rocket motor. It could only be fired once and the specific impulse was limited. To overcome these limitations, the United States embarked on a large program to build the nuclear rocket engine. Unlike the nuclear aircraft engine, this program overcame the technical obstacles placed before it was VERY successful. The effort resulted in numerous test engines up through the Phoebes 5000 MW monster, which is still the world's most powerful reactor. The nuclear engines could run at full power for an hour, then be shut down and restarted up to a dozen times or more. Also, the flow of fuel (liquid hydrogen) could be regulated through turbo-pumps to 'throttle' the engine just as one does a car engine. Crew radiation shielding from the engine was less than requirements for cosmic ray shielding. At one point, a KIWI series reactor (KIWI-TNT) was blown up on purpose to test the environmental impact; it was minimal and clean up went quickly. The final result was to be a space rated engine called NERVA, or Nuclear Engine for Rocket Vehicle Application. Before the project was terminated, many vehicles were designed for deep space exploration based on these amazing engines.

Airfix Boeing 314 Pan Am Clipper - Dixie or BOAC Berwick, 1/144, 04172-6

Plastic Model Kit,   Box Condition: Exc

Sold   

Very nicely molded and detailed kit dated 1980. Has decals for both aircraft and is molded in silver and clear. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. In the 1930s Pan Am was a household word in the USA for their romantic foreign routes and the glamorous 'China Clippers' that crossed the Pacific Ocean, stopping at such ports as Wake Island. Pan Am's attention soon turned to the Atlantic. Since non-stop service would be needed, a new aircraft was designed. The Boeing 314 was chosen. This huge flying boat started flying the Atlantic mail in 1939 with a trip over 26 hours long. Before the war, the 314 fleet flew the Pacific, Atlantic and other routes. The airliner was a palace compared to the cramped jets and limited service of today. The flight deck compared to the bridge of a ship and housed 6 crew. It was connected to the passenger cabin by a spiral staircase. The luxurious cabins were divided into 5 standard compartments, each seating 10 passengers, a dining salon for 14, a special compartment for four and a deluxe bridal suite. 74 could be carried on day trips and 40 when sleeping quarters for all passengers was required. Chefs prepared gourmet meals while passengers lounged in deeply cushioned wicker chairs and enjoyed a grand view of the scenery from about 5,000 feet. The age of the Clippers ended shortly after WWII when land planes could operate at much higher speeds than the flying boats.

Hobby Craft de Havilland DHC-3 Otter - USAF or RCAF, 1/72, HC1395

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very nicely molded kit with all fine recessed panel line details. Features detailed cockpit as well as the cabin floor, clear windows for the cockpit and sides and decals for two aircraft.

Revell Wright Cyclone Radial Engine C9HE - (ex-Monogram), 1/12, 8881

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. 1991 issue of the famous Monogram Four Star Model from the late 1950s. The Cyclone was very dependable and powered numerous famous aircraft, the DC-3 and B-17 being just a few. Very highly detailed. Molded in three colors as the original and has all the same working features: movable prop, extra parts to show cutaway working piston and tilting test stand. Mold swapping between Revell and Monogram started soon after the same European holding company bought them both.

Tamiya Kawasaki Z1300 Motorcycle Engine, 1/6, BS0623

Plastic Model Kit,   Box Condition: VG

Sold   

Rare model in exaxt 1/6 scale of the famous Kawasaki 6 cylinder DOHC, water cooled motorcycle engine that powers the Z-1300 and KZ-1300. Features an extremely detailed engine, radiator and fan unit, wire mesh stone guard, drive shaft, disc brake and even the rubber shaft boot. Engine and drive train are mounted on the provided display stand shown on the box top. Molded in black, chrome, matt aluminum. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

DML Mistel 5 He-162A-2 Volksjager Salamander With Arado E-377a, 1/72, 5002

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Dated 1991 and a highly detailed model. Superbly molded with all very fine recessed panel lines. Features both aircraft, super detailed '162 cockpit, complete turbojet engine, detailed gear wells, photoetched parts, optional position canopy and more.

Hobby Craft De Havilland DHC-3 Otter - USAF Arctic Supply or RCAF 411 Sq. CRB Downsview, 1/72, HC1396

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Features all fine recessed panel lines, clear side and cockpit windows, good cockpit detail, floor for cargo/passenger compartment, optional skis or wheels and decals for both air forces.

Hobby Craft de Havilland DHC-2 Beaver (U-6A / L-20) - USAF or Royal Australian Air Force, 1/72, HC1398

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Nicely molded with all recessed panel lines and the fuselage molded in clear so the windows can be realistically represented. Includes colorful decals for both aircraft.

Airfix Boulton Paul Defiant N.F.I - Bagged T3 Logo Issue, 1/72, 111

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. 1960s bagged issue with Type Three logo header in 'excellent' condition.