Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

LS Lockheed P-3C Orion - Update I or Update II - US Navy VP-19, 1/144, E2

Plastic Model Kit,   Box Condition: Good

Sold   

Traditional high quality LS quality kit that features all recessed panel and control surface lines, some cockpit detail, rotating propellers, opened or closed weapons bay, optional position landing gear, optional parts for Update II or Update I and colorful VP-19 decals. NOTE: this kit has minor, 'professional' quality subassembly as follows: wing halves, nacelles and pylons built. There is no other assembly. Inventoried 100% complete and includes decals and instructions.

LS Lockheed P-3C - JMSDF VP-3, 1/144, E6

Plastic Model Kit,   Box Condition: Exc

Sold   

Very well molded and detailed small scale LS model of the famous anti-submarine Orion. Features all fine recessed panel lines, cockpit, rotating propellers, optional parts for Update I and Update II Orions, optional opened or closed fore and aft fuselage weapons bays and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: exhausts glued to rear of nacelles; 3 pylons to wing underside, all forward engine nacelle halves assembled. There is no other assembly. Inventoried 100% complete and includes decals and instructions There are enough decals to make almost any aircraft from VP-3.

Bandai Tiger I Ausf.E Sd.Kfz.181 - Panzerkampfwagen VI, 1/48, 35434-700

Plastic Model Kit,   Box Condition: VG

Sold   

Rare 1/48 scale kit. Part of the classic and highly detailed Bandai Pin Point 1/48 armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Revell TWO NATO Helicopter NH90 TTH, 1/72, 04489

Plastic Model Kit,   Box Condition: VG

Sold   

Rare. SALE!! Includes two kits in the one box shown. Kit #1 is never started and inventoried complete with all parts, including decals and instructions. NOTE: Kit #2 has minor and 'professional' quality subassembly as follows: (2) cowls to fuselage halves; (2) seats and center instrument panel to floor; bulkhead halves assembled. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. This is an excellent kit from all new molds and features 133 pices, fine recessed surface detail, full cockpit, complete interior, optional position doors and much more.

Revell USS Franklin D Roosevelt CVB-42 - Midway Class Aircraft Carrier - Picture Fleet / US Naval Aviator Wings Issue, 1/547, H321-300

Plastic Model Kit,   Box Condition: Good++

Sold   

1961 hardbox 'Picture Fleet' issue from the original 1954 Pre-S molds. The Pre'S' Roosevelt was Revell's first aircraft carrier and a very good kit of a straight-deck Midway class ship in the near-original configuration. Features one piece hull, early heavy AA and light batteries that are separately molded, cranes, detailed island and air wing of Cougars, Skyraider, F4U Corsairs and helicopters. I recommend purchasing Loren Perry's Gold Medal Models PE Super Detail Set which does wonders for all of the box scale Revell aircraft carriers, including this one. Starfighter Decals also does does an amazing job on a modern and comprehensive decal sheet that includes the air wing. The kit has never been started. Inventoried 100% complete including all parts, decals and instructions.

Hobby Craft Grumman S2F-1 Tracker - US Navy VS-20 USS Princeton 1956 or VS21 NAS Oakland 1959 - (Ex-Hasegawa), 1/72, HC1350

Plastic Model Kit,   Box Condition: VG++

Sold   

From ex-Hasegawa molds or a direct copy of the Hasegawa kit. Nicely molded kit with very fine raised panel lines and the exact same parts as the Hasegawa offering. Includes decal and paint guide for both Navy Blue aircraft. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Citation I Business Jet, 1/48, T2

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. This is a very nice kit that features full interior and cockpit with business jet seating and bulkhead arrangement, optional position cabin door and boarding stairs, realistically tinted clear cabin and cockpit windows and more. Includes two decals sheets - one with full stripes for the box art aircraft, US registration and another sheet with a very large selection of numbers and letters for other registrations.

Hasegawa Falcon 10 Business Jet, 1/48, VT102

Plastic Model Kit,   Box Condition: Exc

Sold   

1994 issue that is large scale (1/48) and originally from the early 1980s. Features complete cockpit and interior and optional position passenger doors. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Mercury and Gemini Capsules - Young Astronauts Issue, 1/48, 5909

Plastic Model Kit,   Box Condition: Fair

Sold   

1987 issue from original Revell molds. Hard to find and well detailed 1/48 scale kit containing both Mercury and Gemini capsules. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Also includes the poster and membership application noted on the box top.

Monogram F-100 Super Sabre Thunderbirds, 1/48, 5442

Plastic Model Kit,   Box Condition: VG

Sold   

Hard-to-find 1985 issue that includes a large, colorful decal sheet with complete Thunderbirds markings. Features full cockpit and wheel well detail, visible gun bay with optional hatch, realistic internal inlet, optional jet exhaust and refueling probe, optional position speed brakes and canopy, full underwing stores - missiles, drop tank - and boarding ladder with ground crew member. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Decals are in 'near mint++' condition.

ESCI Douglas R4D-5 South Pole Pioneer (C-47) - US Navy, 1/72, 9019

Plastic Model Kit,   Box Condition: VG+

Sold   

Very finely molded with all recessed panel lines, full cockpit and interior, optional position doors, JATO rockets and skis. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Set Of Four Firestone White Wall Tires - (2) Front Size 6.00-15 And (2) Rear Size 8.00-15 - Custom Accessories For 1/8 Scale Cars - Bagged, 1/8

Plastic Model Kit,   Box Condition: VG+

Sold   

Very rare and from 1963. Ideal for customizing Monogram's large 1/8 cars or any other large-scale car kit. All four tires are in factory-new, never used and 'mint' condition. Includes the following tires: (2) Firestone front whitewalls size 6.00-15 and (2) Firestone rear whitewalls size 8.00-15. All four are molded in a rubber-like, hollow and flexible plastic. In an attempt to make the superb but very expensive 1/8 car molds pay off, Monogram issued some parts separately as accessories for any larger car models. The entire line came out in 1963 and consisted of AK201-59 Six Carb Assembly, AK202-59 Oval Gas Tank, AK203-79 Drag Race Set, AK204-79 GMC Blower Set, AK205-79 Chrome Wheel Set, AK206-100 White Wall Drag Slicks and AK207-79 White Wall Tires. Sales were very weak because all of the 1/8 scale car kits were very expensive for that time, so and the line was discontinued.

Moebius 53 Foot Trailer With Reefer Option, 1/25, 1302

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Excellent kit from completely new molds. Measures 26.5 inches long and 6.5 inches high. Features highly accurate undercarriage with complete cross members, angle braced landing gear and tandem axles, corrugated side panels, optional refrigeration kit, chrome wheels, chrome rear doors, chrome front end panel and more. Includes decals and instructions.

AMT Double Header Two 27 Foot Exterior Post Doubles Vans - Semi Truck Trailers, 1/25, 38684

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. This reissue dated 2008 featurs more than 230 parts and measures more than 2.5 feet in length when built. Features two vans with authentic converter dolly with fifth wheel coupler for 'train' configuration, detailed suspension, TODCO overhead operating sliding doors, adjustable landing gear, hollow rubber tires and CF decals for your trailers AND a semi tractor.

Trumpeter De Havilland Sea Hornet NF.21, 1/48, 02895

Plastic Model Kit,   Box Condition: Good+

Sold   

Very nice quality kit with all recessed panel lines, very good dual cockpit detail, detailed gear wells, optional folded or straight outboard wings, separately molded wing flaps and more. With color painting guide and full decals. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Renwal Wrecker Crane US Army 5 Ton 6 x 6 - Blueprint Issue, 1/32, M559-249

Plastic Model Kit,   Box Condition: Good

Sold   

Rare original issue from the 1950s - not the 2013 reissue. This large model has 155 parts and many action features. This reproduction of the six-wheel drive 5 ton Wrecker was designed straight from US Army Blueprints and data from the US Army Ordnance Corps. The kit incorporates nearly all the movable features of the actual equipment. The front wheels steer realistically, the hood opens to show the highly detailed engine, the windshield is collapsible and the doors of the cab can be opened and closed. The cab can be enclosed with a simulated canvas top. The rear train provides realistic suspension over irregular surfaces. The crane is completely operable and can hoist actual objects. The winch can be used realistically to pull other models. The jacks can be extended and lowered to support the truck. Additional sheave blocks are provided for hoisting and pulling operations. All four functions of the crane - lifting or lowering the shipper, extending or retracting the boom, winding or unwinding the hoist drum and swinging the boom to the left or right - can be realistically simulated. There has been no assembly. The parts that were factory sealed are still in the factory sealed clear bags. The parts that were never factory sealed have been inventoried complete and include decals and instructions.

Monogram USS Constitution Old Ironsides Frigate, 3501

Plastic Model Kit,   Box Condition: Good-

Sold   

From 1977 with John Steel box art. An excellent kit with simplified assembly; a slightly easier build than Revell's kit of the same size. The scale is not mentioned but this one measures just over 16 inches long when assembled. I estimate that it has been 75 to 100 parts. Features finely engraved one piece hull, detailed deck with all fittings, one-piece masts and yards, molded ratlines, superb vacuform sails (some of the best I have seen), rigging thread, rigging instructions, display stand and decals. Molded in black, wood tan and the sails in ivory vacuform plastic. The kit has never been started. Inventoried complete including decals and instructions.

Revell USS Enterprise The Big E - CV6 Aircraft Carrier, 1/490, H378-300

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare. This is the 1967 hardbox issue of this very hard-to-find model with fantastic box artwork. CV-6 has a combat record unequaled in history of the US Navy and is considered the most 'Successful Warship in History.' Her totals were as follows: 20 Battle Stars, 911 Aircraft Destroyed and 71 Ships Sunk. She took part in almost every major action of the Pacific war from 1941 to 1945. The fascinating history of this ship is told by Commander Edward P. Stafford, USN, in his legendary book "The Big E - The Story of the USS Enterprise." The kit is over 20 inches long and includes a one-piece full hull, complete propeller and rudder detail, SBD scout-bombers, moving cranes, separately molded AA guns, correct changes to deck gun galleries and island structure for an accurate Big E and much more. The kit has never been started. It has been inventoried complete with all parts present and includes decals for the ship and aircraft, flags and instructions. Please note that the box displays better than the 'good-' grade but is rated as such because there is a closed tear at the upper top of the island structure.

Thunder Tiger Falcon 3.5 Tunnel Hull Racing Boat - 31.1 Inches Long, 5200

Metal and Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory 'round tape' sealed with the special Thunder Tiger tape. This is a high quality, heavily prefabricated model featuring a sturdy 1.5mm thick ABS hull structure that is pre-built at the factory. Access to the radio compartment for installation and maintenance is quick and easy. This zone is waterproof and includes protective balloons for the receiver and battery pack. Pushrod exits are also waterproof. The white white hull and superstructure dresses up nicely with the colorful decal sheet provided, so no painting is needed. Never started. Everything inside is exactly as it left the factory. The smaller part that were factory sealed are still sealed. The larger parts were never sealed and have been inventoried complete. Includes all paperwork. This beautiful almost ready to run boat does not include engine and radio equipment; you must supply those. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that

Eastern Express Visount 700 Alitalia, 1/144, EE144138_2

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Very well molded and includes full Alitalia decals.