Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Pyro Gertrude L Thebaud Fishing Schooner, B206-400

Plastic Model Kit,   Box Condition: VG

Sold   

Large scale issue from the 1960s, and from the original late 1950s molds. Measures 20 inches long when assembled. Very nicely detailed for that time. Includes one piece hull, full deck fittings, ship's boats, rigging material and detailed instructions showing rigging steps and the story of this famous ship. Molded in black (the hull), tan and dark wood colors. Never started. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Aoshima Brewster F2A-2 Buffalo Motorized, 1/72, 6

Plastic Model Kit,   Box Condition: VG++

Sold   

Very rare first issue and the motorized version. Late 1950s/early 1960s Japanese kit with very collectible, high-gloss box artwork. Clearly the artwork was met to represent a British tropical airfield, perhaps RAF Sembawang, Singapore during the Japanese onslaught. Features retractable landing gear, rotating or motorized rotating prop, rotating wheels, working wing flaps and ailerons, optional position canopy, all wiring and clear wired remote control battery holder. The kit is engineered for a Mabuchi Baby Motor but please note that Aoshima did not include them with the kit; there were sold separately. The model as never been started. All parts are still sealed in the factory clear internal bag. With the original tube of cement, decals and instructions.

JV Models Alden Farms Stock Yards - John Rendall Scale Model Division - HO Scale Craftsman Model, 1/87, 2028

Wood Model Kit,   Box Condition: Exc

Sold   

Excellent kit made primarily from factory-cut hardwood. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Guillows Focke-Wulf Fw-190 - 25 inch Wingspan RC / Control Line / Free Flight Flying Model, 1/16, 406

Wood and Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

SALE!! Still factory sealed and in 'excellent++' condition. From about 1967/68. One of a very popular 1/16 scale stick-and-tissue series with a 25 3/4 inch wingspan. Can be flown on gas power, U-Control, radio control (R/C) or rubber power. Features high quality balsa die cut balsa parts and stripwood, die-cut plywood parts, vacuform nose / spinner / pilot and more, wheels, plastic propeller, hardware, clear vacuform canopy, covering tissue, big decal sheet and full size plans with detailed building instructions. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.

AMT 1957 Ford Fairlane 500 Stock or Custom, 1/25, 8028

Plastic Model Kit,   Box Condition: Good+

Sold   

Well detailed model with over 120 parts. Can be built as the factory version or a full-blown custom. Stock version features opening hood and doors, 312 CID / 245 hp 4 barrel V-8 engine and detailed engine compartment, interior and underside. Optional parts include - 'Billet' style air cleaner and finned valve covers, exhaust headers and 'Paxton' Supercharger, bullet taillights, headlight housings and front grill, tilt steering column and 'street' wheel, 'Auto Trans' floor shifter, front bucket seats and twin rear seats and more. Molded in gray, clear, chrome and black rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

JL Innovative Design McDougall Telegraph Office - HO Scale Craftsman Model, 1/87, 271

Wood Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Well detailed craftsman style model, perfect for a HOn3 layout.

AMT 1958 Chevrolet Impala 2 Door Coupe - 3 in 1 - Stock / Show Custom / Street Rod, 1/25, 6548

Plastic Model Kit,   Box Condition: VG

Sold   

Can be built one of three ways and includes many custom parts and decals. Features detailed 'W Block' engine and compartment, opening hood, complete interior, opening doors, underside details and more. Molded in light blue, clear, red-tinted clear, chrome and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Renwal 1966 Packard Modern Classic - Revival, 1/25, 104-198

Plastic Model Kit,   Box Condition: Good

Sold   

The idea behind Renwal's Revival Series came from the Detroit design team of Virgil M. Exner Sr. (the famous Chrysler designer) and his son, Virgil Jr. The famous design team, somewhat displeased with modern automobiles, started thinking about what the old time classics would look like today - Packard, Mercer, Duesenberg, Stutz, etc. Virgil Sr. and Jr. thus designed four modern classics and they were published in a national magazine - Renwal then began kit production of these four. The kit features a complete V-12 engine, some engine compartment detail, removable hood and a complete interior. It is very cleverly molded in gloss light green, gloss dark green, chrome, clear & red-tinted clear to minimize painting and includes rubber whitewall tires. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Monogram AT-6 Texan - White Box Issue, 1/48, 5306

Plastic Model Kit,   Box Condition: Good-

Sold   

1979 release that is very nicely molded. Features highly detailed cockpit including structural side members, optional position canopy, detailed gear and flap wells and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram B-25H Mitchell Medium Bomber with Diorama Sheet, 1/48, 5500

Plastic Model Kit,   Box Condition: Good

Sold   

First issue in the 'tall' box dated 1977. This is the issue with the desirable color Diorama Sheet. An excellent model that features full interior, optional position bomb bay with bomb load, rotating turrets and elevating guns, optional position crew hatch, and rotating props. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Republic P-47D Thunderbolt - 527th FS/86th FG, 1/32, H296-300

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed but the seal has splits. Early issued dated 1969. Has decals for the Squadron Commander of that squadron of the 12th Air Force in Corsica in 1944. Well detailed kit for this time and features full cockpit, opening canopy, complete engine with removable cowling doors, optional position landing gear and rotating prop and wheels.

Comet Phantom Fury - 32 Inch Wingspan Flying Airplane - Plans by Robert Reder co-founder of Monogram, E24

Wood Model Kit,   Box Condition: Fair

Sold   

Stick-and-tissue kit from the 1930s. When Bob Reder was young, he was hooked on flying models. Upon graduation in 1935, he went to work for Comet. He drew this version of the Phantom Fury plans and put his name at the bottom. This is a very nice kit for that time, featuring a large balsa printwood sheet, a pre-carved prop that only needs finish sanding, nose block, factory cut strip wood in all required sizes, other balsa stock as required for gear struts, etc., fully carved wooden wheels, red and orange covering tissue, clear window material, metal prop shaft and full size plans. The kit has never been started and is 100% complete. NOTE: The box looks great but is graded 'fair' because it is missing all of the end flaps.

Megow Boulton-Paul Defiant - 16 Inch Wingspan Flying Airplane, F44

Wood Model Kit,   Box Condition: Fair

Sold   

Rare stick-and-tissue flying model from the late 1930s. Features two sheets of balsa printwood (one is for a three blade prop), factory-cut strip wood, other wood as required, the original rubber band (very brittle!), a sealed envelope of hardware, blasa block, neutral and dark blue covering tissue, full color British Insignia sheet just for this kit and full size plans. The kit has never been started and is 100% complete. NOTE: it is in a Baby ROG box. There are no box end flaps, hence the 'fair' grade. There is bug damage to the plans and the edges of the insignia sheet and tissue.

Rapido ATSF Sante Fe Wide Vision Caboose - HO Scale, 1/87, 110072

Plastic Model Kit,   Box Condition: NM

Sold   

Amazing factory built, painted and lettered model with incredible detail and working marker lights. This one was run once and is still mint other than a slight bit of dust. The only wear is very slight wear to the wheels if you look closely. The upper window did fall out; it is present so it is 100% complete. Includes all paperwork

Tad Dowdy & Jim Key 1966 Batmobile TV Series, 1/25, SFO32

Resin Model Kit,   Box Condition: Exc

Sold   

Very rare. This resin model is a superb effort and very accurate. Features high quality cast main parts and details, clear vacuform canopies (still in as-new condition and not even yellowed), decals and detailed, illustrated instructions with numerous painting details. Also included is a set of injection molded chrome plated Batmobile rims, rubber tires that fit them and gray plastic inner rims. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Airfix Martin B-26B Marauder - 'Mild And Bitter' or 'Dee-Feater', 1/72, 04015-4

Plastic Model Kit,   Box Condition: VG

Sold   

Has markings for 'Dee-Feater' of the 597th Sqn, 397 Bomb Group at Rivenhall, Essex and 'Mild and Bitter' of the 450th Sqn, 322 BG based at Great Ailing, Essex and was one of the first B-26s to complete 100 missions from the UK. Very nice kit. Includes full cockpit, extensive bomb bay detail, elevating guns and rotating turrets, rotating props and wheels, optional position bomb bay doors, crew boarding ladder, crew member and moving elevators. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Italeri Douglas C-47 Skytrain - USAAF or RAF, 1/72, 127

Plastic Model Kit,   Box Condition: VG+

Sold   

Well detailed inside and out. Includes decals included for both Air Forces. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Sterling Minnie Mambo - 36 Inch Wingspan For Radio Control (R/C), FS9

Wood Model Kit,   Box Condition: VG

Sold   

Rare and desirable kit in never started and complete condition. "Designed for Beginners - Acclaimed by Experts," the Mini Mambo flies on half-A engines and was designed for single channel R/C. Features simple construction, precision-cut balsa wood sanded to micrometer tolerance, simple construction, shaped leading and trailing edges, die cut ribs, bulkheads and more, die-cut structural plywood parts, anti-warp elevator design, shaped cowl and cabin blocks, sheet balsa covered fuselage sides, formed wire landing gear, hardware and great full size plans with detailed building instructions printed on them. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Guillows Nieuport 11 - 24 inch Wingspan for Free Flight or R/C Conversion, 203

Wood Model Kit,   Box Condition: Good

Sold   

Large scale well detailed kit. Can be flown rubber free flight, gas free flight, or converted to electric RC using modern small, light servos and receivers. Well detailed with scale plastic wheels, plastic propeller, vacuform nose/cowl and engine, full color decals, colored tissue, die cut balsa parts, rubber motor, plywood firewall and excellent full size plans. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.