Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Tamiya Leopard A4 - With Conning Tower and Figure, 1/35, MM212

Plastic Model Kit,   Box Condition: Exc+

Sold   

Excellent and well detailed armor model that includes many accessory parts. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya Panzerkampfwagen III Ausf. L - Sd.Kfz.141/1, 1/35, 35215

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Highly detailed and beautifully molded armor kit.

Aurora Fokker D-VIII - Flying Razor, 1/48, 135-79

Plastic Model Kit,   Box Condition: Exc

Sold   

Second issue dated 1959 with fantastic Jo Kotula artwork and Famous Fighters Sunburst logo. This model of the dreaded 'Flying Razor' of WWI is molded in a beautiful metallic high-gloss green and black plastics. Never started. Inventoried 100% complete with all parts, decals and instructions present. The Fokker D-VIII was a great performer but it came too late to change the tide of the air war. It started life as the Fokker E.V, one of the first warplanes to have the cantilever wing. This advancement was the result of a long-term Fokker project to perfect this technology. In addition to greatly reducing drag, a properly built cantilever wing is very light and strong. This wing was first used on prototype V17 and then on V28 which took part in the Second Fighter Competition (July 6-14, 1918) where the most experienced German front line pilots chose new fighters for late war service. V28 was chosen for it's excellent flying properties and 200 of the production aircraft, known as the Fokker E.V, were ordered. Over 289 aircraft were delivered. The E.V began front line service on August 5, 1918; Lt. Emil Rolff of Jasta 6 reported an aerial victory on August 17. However, the day before, an E.V suffered catastrophic wing failure. Two days later, the same failure cost Lt. Rolff his life. All E.Vs were immediately grounded. A detailed investigation showed that there were fatal defects in the wing assembly caused by slack manufacturing processes. Although it was not his fault, Fokker took this opportunity to re-design and strengthen the wing. Existing E.V aircraft received new wings and newly built aircraft were designated D.VIII. Modified aircraft made it back to the front in November, too late for service. However, the aircraft saw active service after that war with the Freikorps air units, the Polish Air Force against Russia, the Dutch Air Force and an unspecified number went to France and the USA.

AMT-Hasegawa 18SHI Nakajima Renzan Rita - Japan or Captured USAAF Evaluation Aircraft - BAGGED, 1/72, A680-300

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - there is no box. The box is shown for reference only. This model is from a short-lived marketing project by AMT for selling high quality Hasegawa models in the USA. Includes color paint guide (cut from the back of the box) and decals for two different aircraft. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Hasegawa F-14A Tomcat Black Bunny / Low Visibility - Evaluators VX-4 / Swordsmen VF-32 / Screaming Eagles VF-51, 1/48, SP13

Plastic Model Kit,   Box Condition: Exc

Sold   

Rare special limited issue dated 1990. The Hasegawa Tomcat series is widely regarded as the most extensive and finest 1/48 F-14 kits ever made. Very highly detailed model features 292 pieces, photoetched and cast metal parts, real rubber tires, all fine recessed panel lines, detailed cockpits and gear wells, optional position canopy and boarding ladder, two positionable crew members, excellent intake and exhausts, optional position speed brake with well detail, separately molded wing leading edge slats, separately molded wing inboard flaps and more. With paint guides and decals for all the aircraft listed. Never started. The parts are all still in the factory sealed bags and includes the decals and instructions.

Monogram F-4J Phantom II - Black Bunny, 1/48, 5805

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 1981 issue and a high quality kit. Includes full cockpits, AIM-7F Sparrow II and AIM-9 Sidewinder missiles, bombs and drop tanks, good cockpit detail, optional position canopies and detailed landing gear and wheel wells.

Great Planes Yard Stick Electrifly ARF - 41 Inch Wingspan Electric R/C Slow Park Flyer, GPMA1100

Wood Model Kit,   Box Condition: VG+

Sold   

An excellent ARF (Almost-Ready-To-Fly) model with a very high degree of prefabrication and one hour assembly. Includes factory built and covered wings, elevator and rudder, plug together assembly, 280 size electric motor and gearbox, durable nylon propeller and more. All you need to add is a battery pack (650 mAh 7.2 volts recommended), speed control and transmitter/receiver/servos.

IMC Mark II Ford GT - GT40 Daytona 98 / Le Mans 2 / Sebring 1, 1/25, 112-200

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare and well detailed model features your choice of three engines: Le Mans type 255 CID overhead cam engine, 427 CID engine with single carburetor or 289 CID pushrod engine with 8 Webber carburetors, hinged front and rear hoods, steerable wheels, well detailed front and rear working suspension, full cockpit, opening doors, accessory jack and much more. Molded in white, clear, red-tinted clear, chrome plate and with rubber racing tread tires. The kit has never been started. It has been inventoried complete with all parts and includes decals for multiple cars and instructions. NOTE: decals are present but peeling badly. You will need to supply your own decals.

StromBecker Piper Cub Super Cruiser, C-34

Wood Model Kit,   Box Condition: VG

Sold   

From the 1950s. StromBecker was famous for this line of precarved hardwood kits. All quality hardwood - no balsa. Builds to an impressive display. Never started and inventoried complete with all parts, decals and instructions. Before plastic kits were introduced, Strombecker was famous as the premier hardwood preshaped model manufacturer. In the 1940s and 1950s, Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are hardwood and are precarved to shape - you only had to glue, sand and paint to finish them.

MRC OH-58D Kiowa Black Death, 1/35, BA103

Plastic Model Kit,   Box Condition: VG+

Sold   

This large scale kit is highly detailed inside and out. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell 1956 Mercury Montclair Customizing Kit, 1/32, H1233-129

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare original hardbox issue from 1958. This kit builds a custom Montclair with numerous options. Features the Mercury model with a detailed engine, removable hood, detailed engine compartment, full interior, separately molded suspension and molded in underside detail. It is molded in a dramatic glossy deep purple plastic and chrome plate. The accessories include wild custom decals, custom grille, 2 fender fins, wheel disc bullets, filler plugs, 2 piece club pin, custom decals with flames or pencil lines and white stripes, white wall decals, rear view mirrors, antennas, spotlights, continental kit, hood scoop, top rear scoop, two side stacks and more The kit has never been started. Inventoried and NOTE: missing the drive shaft. It is a simple cylinder easily made from stock plastic or the included purple sprue. Includes all other parts, both sheets of decals, clear material for windows and instructions.

Hasegawa Aircraft Weapons I US Bombs & Rocket Launchers And II US Guided Bombs and Gun Pods, 1/72, X72-1

Plastic Model Kit,   Box Condition: Exc

Sold   

SALE!! Includes both 1/72 scale accessory sets in the original boxes. Never started and inventoried 100% complete with all parts, decals and instructions present.

Monogram A-37 Dragonfly - USAF or South Vietnam AF, 1/48, 5486

Plastic Model Kit,   Box Condition: Fair

Sold   

The box top is rough but the kit inside is factory-new. A-37s served as close support aircraft in Vietnam. The Dragonfly carried a nose mounted minigun that fired 6000 rounds per minute and had a large variety of underwing stores. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

AMT Curtiss P-40F Warhawk, 1/48, 8795

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Nicely molded and features fine all-recessed panel lines, complete cockpit, four piece canopy, drop tank and bombs, detailed wheel wells and more.

AMT Curtiss P-40N Warhawk - Rosy The Riviter 49th FG 7th FS / Germonimo 15th FG 45th FS Lt. Bruce Campbell, 1/48, 8798

Plastic Model Kit,   Box Condition: VG

Sold   

Very nicely molded and features fine all-recessed panel lines, complete cockpit, three piece canopy, drop tank and bombs, detailed wheel wells and more. Includes paint guide and markings for both aircraft listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Hasegawa Lockheed P-3C / CP-140 Orion - RCAF (Canadian) or US Navy VP-19, 1/72, 1147

Plastic Model Kit,   Box Condition: Good-

Sold   

Quality model that is very nicely detailed. Dates from the early 1980s. Includes parts and instructions to convert it to the Canadian CP-140. Never started. Inventoried 100% complete with all parts, decals and instructions present.

Monogram River Patrol Boat - Compact Shallow-Water Craft Vietnam, 1/48, 8299-0225

Plastic Model Kit,   Box Condition: Fair++

Sold   

Very hard-to-find Monogram ship model dated 1973. Features full one-piece hull,propeller and rudder detail, moving gun turrets, four scale crewmen and display stand. Never started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: decals are flaking and ruined. If you are going to build this kit you will need to provide your own decals.

Aurora US Army M109 Howitzer Tank - Self Propelled Gun, 1/48, 314-129

Plastic Model Kit,   Box Condition: Good+

Sold   

John Steel hardbox artwork is dated 1963. Hard to find 1/48 scale armor kit that is very well detailed for that time. Features detailed, individual bogie drive train, flexible tracks, driver figure, optional position hatches, elevating gun, rotating turret, accessories, tank commander and more. Molded in gloss olive drab with black flexible tracks. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box is only graded 'good+' because there is some light age foxing and a shallow dent at the far right lower side as shown and also on the right short side panel.

Bandai British Truck 3 ton Austin K5, 1/48, 8361

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare kit that is part of the classic and highly detailed 1/48 Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Frog Martin 167 Maryland - Reconnaissance Bomber 'Nantes' GBII/20 Free French North Africa 1941/42 or South African 24th Sqn No.3 Wing Desert Air Force 1941/42- Green Series, 1/72, F241

Plastic Model Kit,   Box Condition: Good

Sold   

1970s 'Green Series' issue which includes a color painting guide and decals for both aircraft. Well molded for that time and contains no rivets - just fine panel lines. Features rotating turret, crew of three and some interior detail and optional position landing gear. Includes decals for Free French 'Nantes' GB II/20 North Africa and South African 24 Sq No 3 Wing North Africa. NOTE: this kit has minor and very neat subassembly to 4 pieces: the wing halves are assembled to 'near mint' quality. There is no other assembly. It has been inventoried complete with all parts and includes decals and instructions. Please NOTE that the box has age foxing as shown. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.