Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell P-47D Thunderbolt, 1/144, H1022

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Rare Lodela issue, most likely from the late 1960s or early 1970s. The colorful inner box is factory sealed with special Lodela tape, then it was factory shrink-wrapped.

Revell Corsair F4U-1, 1/144, H1023

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Rare Lodela issue, most likely from the late 1960s or early 1970s. The colorful inner box is factory sealed with special Lodela tape, then it was factory shrink-wrapped.

Revell Zero Sen Type 21, 1/144, H1009

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Rare Lodela issue, most likely from the late 1960s or early 1970s. The colorful inner box is factory sealed with special Lodela tape, then it was factory shrink-wrapped.

Revell Junkers Ju-87B Stuka, 1/144, H1019

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Rare Lodela issue, most likely from the late 1960s or early 1970s. The colorful inner box is factory sealed with special Lodela tape, then it was factory shrink-wrapped.

Hasegawa Focke-Wulf FW-190 A6 or A8 - III/JG54 Green Hearts or JG54 Major Walter Nowotony, 1/32, S10

Plastic Model Kit,   Box Condition: VG++

Sold   

Nicely detailed kit from 1987. Has optional parts to build both versions listed and decals with a full color painting guide for both aircraft. Features good cockpit, optional position canopy, detailed engine and gun bay with separately molded access panels, detailed gear wells, optional position flaps and a drop tank. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram Cessna 180 - White Box Issue, 1/41, 6825

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 1973 issue of the famous large-scale Four Star kit from 1965. Has many working features - prop spins, cowl comes off to show detailed engine and doors open to reveal complete interior. Includes standing pilot figure.

Revell Shinden Kai, 1/144, H1011

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Rare Lodela issue, most likely from the late 1960s or early 1970s. The colorful inner box is factory sealed with special Lodela tape, then it was factory shrink-wrapped.

Wingnut Wings SE.5A Hisso Scout - (Se-5), 1/32, 32003

Plastic Model Kit,   Box Condition: Exc

Sold   

Amazingly well detailed and certainly the finest injection-molded Scout kit available in any scale. Never started. All of the parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya Panzerjager Jagdpanzer Sd.Kfz.173 Spate Version, 1/35, 35203

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Highly detailed and well molded.

Hasegawa IJN Musashi Battleship Motorized, 1/450, 2

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal has split as shown. Hard-to-find, motorized model of this super-battleship measures 22 inches long when assembled. Features one piece hull, moving main armament, detailed secondary and AA guns, float planes, motor drive and more. Ideal for R/C operation with modern small receivers and servos.

Protar Renault Turbo RE23, 1/12, 170-P

Plastic Model Kit,   Box Condition: Fair

Sold   

Large-scale kit that is very highly detailed and builds up like the actual car. The engine alone is a masterpiece and a kit in itself. Also includes brake lines, cables, cockpit instrument wiring, ignition wiring, completely detailed chassis, working suspension, full interior and much more. Molded in bright yellow, white, black, silver, clear, chrome plate, a very large number of flexible lines, rubber tires and metal parts (such as suspension springs). The kit has not been started. All bags but one are still factory sealed. One bag was split, so I inventoried it and it is 100% complete. With decals and full, illustrated instructions. NOTE: the decals are 98% intact but have moisture damage. Because of that, they have the typical cracking. You can buy them online from a man in Belgium does make a brand-new set of decals for this model. But you can make your own if you wish; please refer to the two articles (located on this website) which explain how you can repair and duplicate these.

Heller Concorde SST - Air France, 1/100, L855

Plastic Model Kit,   Box Condition: Fair

Sold   

Large-scale, yellow box issue with an artwork copyright date of 1965. The box is worn as shown but the kit inside is excellent. This big model features detailed and retractable landing gear, optional position 'drooped' or raised nose, separately molded rudder and wing elevons, four nicely detailed engines, clear cabin and cockpit windows, extensive Air France decals and the trademark Heller large, black display stand. Never started. All smaller parts are still in the internal factory sealed bags; the few large parts that were never sealed have been inventoried complete. Includes decals and instructions.

AMT Peerless Roadrunner Logging Trailer With Log or Beam Load, 1/25, AMT-1103

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Recent reissue from the original molds of the rare 1970s model. Well detailed with over 130 parts, rubber tires, vinyl air hose, components designed to hitch to your choice of AMT tractor models, mud flaps and your choice of loads.

AMT Kenworth K-123 Cabover Tractor Semi Truck, 1/25, AMT687-06

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Recent reissue from the original molds. This is a super detailed truck with over 300 parts and many in chrome. Features rolling chassis build just like the actual truck, tilting sleeper cab, one-piece tilting hood, vinyl air/hydraulic hoses, duel exhaust, fifth wheel assembly, hollow vinyl truck tires, straight or curved exhaust stacks, stock or custom rear wheel hubs, Air Ride Driver's Seat and 855 CID Turbo Charged Cummings Diesel Engine.

Sterling Stinson SR-8 Reliant Gull Wing - 31 inch Wingspan for R/C, 1/16, E8

Wood Model Kit,   Box Condition: Fair++

Sold   

Big scale kit with a 31 3/8 inch wingspan. Designed for RC, CO2, free flight, control line or non-flying detailed scale kit. Although the box has wear, the kit is like new inside. It has never been started. The small parts are still in the factory sealed bag, and all parts that were never sealed have been inventoried complete. With 'excellent' condition decal and large, detailed plan set with instructions. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they featured color decals, high-grade die cut balsa, vacuform plastic detail parts, plastic wheels (if required), finished wire landing gear, rubber motor and plastic prop, full size plans with instruction details and full instructions for conversion to RC or control line.

Sterling P-47 Thunderbolt With Operating Landing Gear In Flight - 20 Inch Wingspan For R/C / Control Line / Free Flight, A4-198

Wood Model Kit,   Box Condition: Poor

Sold   

Please note, the box is intact but very worn and also stained. The kit inside is never started, but please read the full description below as it is not complete. Very nicely produced stick-and-tissue model that lowers the landing gear before the model lands. Can be flown with rubber, electric or gas control line or converted to RC with modern lightweight systems. Features high quality die-cut balsa sheet parts, stripwood and spars, fully formed wire landing gear struts, finished wheels, other wood and metal stock as required, light plastic full engine cowl, pilot bust and other details, rubber motor, plastic prop, a big set of full color decals, coving tissue and excellent full size plans with detailed instructions. Never started. Inventoried and NOTE: missing one part, the vacuform canopy. Otherwise includes all other parts, decals and plans. The small parts are still in the factory sealed bag. NOTE: decals have a stain on two 'stars and bars' decals. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they had the action features and included everything needed to complete the model.

Comet Taylorcraft - 54 inch Wingspan Flying Model for RC, 3505-300

Wood Model Kit,   Box Condition: Fair++

Sold   

1970s very large scale kit with 54 inch wingspan. For rubber or gas free flight or RC (radio control). This is a reissue of a much older Comet kit. Features traditional wood/tissue construction with high-quality balsa pre-cut stringers and spars, balsa printwood, detailed full size plans, building instructions, wheels, rubber, tissue, prop shaft and wooden thrust bearing and a big balsa pre-carved (but not completely finished) propeller. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please note that the box is complete but has stains and wear as shown. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Aurora North American B-70 Valkyrie Bomber (XB-70A), 1/105, 370-249

Plastic Model Kit,   Box Condition: Sealed NM+

Sold   

Still factory sealed and in amazing investment-grade 'Near Mint+' condition. The seal is intact. The only flaw is a very hard to see 1.3" crease at the upper left corner. You must look hard to find it. First issue hardbox from 1962. This box has, in my opinion, some of the best Jack Leynnwood box art. Jack primarily did Revell artwork, but since he was freelance, he did others as well. At this point, the XB-70 was planned for production, so the kit is called the B-70 and the artwork shows a winter night-time quick turn around of a SAC B-70 while another Valkyrie roars overhead after takeoff. The box is in excellent condition with very little wear, four solid corners, no repairs, stains,price tag or tape/tape marks. Very large kit with 6 detailed General Electric J93-3 engines, landing gear and clear canopy.

Aurora Focke-Wulf FW-190, 1/47, 30-100

Plastic Model Kit,   Box Condition: Fair++

Sold   

Dated 1960. Hardbox release of the classic Aurora kit. Notice the 'Sunburst' logo with no 'Famous Fighters' in the oval, which dates this kit closer to the mid 1960s. Molded in black and clear with the clear triangular 'globe' display stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions both in 'excellent' condition. Please NOTE that the box displays much better than the 'fair++' grade. It is graded that low because the top long side panel has numerous light stains. There is also general wear at the very top edge of the box top, but the side panel stains are worse.

Aurora B-25 Mitchell Screwdriver Kit, 1/32, 397-500

Plastic Model Kit,   Box Condition: Good+

Sold   

Very rare. 1968 hardbox has spectacular artwork. This model was designed for Gas Engine U-Control and issued both ways. This is the static model that is molded in olive drab, black, clear and with metal hardware. Never started. It has been inventoried complete with all parts and includes decals and instructions. The box has nice color and gloss, but is only graded 'good+' because there is substantial general wear as shown. The right short and upper long side panels have slight fading also and all side panels have slightly more wear than the box top.