Monogram AV-8B Harrier, 1/48, 5448
Plastic Model Kit, Box Condition: Good
Sold
Dated 1995. Very nicely molded and detailed kit. Features positionable thrust nozzles, detailed cockpit and landing gear and full stores. With US Marines Decals. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Esoteric Boeing F3B-1 Fighter 3, 1/72, NAF-12
Vacuform Model Kit, Box Condition: Sealed
Sold
The F3B was a complete redesign of the less successful F2B-1. F3Bs began to replace F2Bs only a few months. The US Navy ordered 74 F3Bs and they served from 1928 till 1931. The aircraft was very popular with crews, so it continued in use for many years after it left squadron service. While flying as a 'hack' aircraft, they acquired wheel pants and Townend cowl ring - these parts are also included in the kit. Esoteric was known for production perhaps the finest vacuform kits. The mold quality is higher than most injection molded kits. Every part needed to complete the kit is included - down to the interior. Very well molded and highly detailed with metal parts - decals - shaped struts and full instructions. Never started and 100% complete.
Modelcraft Blackburn Shark Mk.II Portuguese Air Force - HMS Courageous or Canadian, 1/72, 72-004
Plastic Model Kit, Box Condition: VG+
Sold
Has markings for all three aircraft: Portuguese Navy Bon Succeso, Lisbon 1936, 820 Sq Fleet Air Arm HMS Courageous 1937 and 3(GP) Sq RCAF Station Trenton, 1937. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Bandai Schutzenpanzerwagen Sd.Kfz. 251/1 Bagged, 1/48, 2
Plastic Model Kit, Box Condition: VG+
Sold
Rare 1/48 scale kit. Part of the classic and highly detailed Bandai Pin Point 1/48 armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads and many operating features. NOTE: kit has minor assembly to front axle and seats. Quality of assembly is very good. Missing men. Inventoried complete with all other parts, decals and instructions.
Revell CSS Alabama Civil War Raider, 1/96, 5621
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
1988 issue. 33 inches long and 18 inches tall. Highly detailed. Includes sails and full rigging. Still factory sealed.
Vac Wings Mitsubishi Ki-30 Ann, 1/72, VW7233
Vacuform Model Kit, Box Condition: Sealed Exc++
Sold
High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Still factory sealed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.
Vac Wings Nakajima E8N1/2 Dave Floatplane, 1/72, VW7238
Vacuform Model Kit, Box Condition: Sealed Exc++
Sold
High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Still factory sealed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.
UPC Messerschmitt Bf-109G, 1/199, 7050-29
Plastic Model Kit, Box Condition: Exc
Sold
From Marusan molds. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Frog Focke-Wulf FW-190, 1/72, 393P
Plastic Model Kit, Box Condition: Exc+++
Sold
1950s issue. Nicely molded with all recessed panel line detail. Includes glue and paint capsules. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Frog Mitsubish Zero (A6M), 1/72, 392P
Plastic Model Kit, Box Condition: Fair
Sold
Includes unopened green tube of cement. Box has top tear as shown in photo. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
MPC Plymouth Barracuda Street Machine, 1/25, 1-0860
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. 1982 issue. Molded in color, clear, chrome and rubber with many optional parts. Features opening hood, detailed hemi engine, complete interior, rear spoiler, hood scoop, full underside details and custom graphics by Harry Bradley and more.
Tamiya Russian Tank T34/76 (T-34) 1942 Motorized with Remote Control, 1/35, MT244
Plastic Model Kit, Box Condition: Exc+
Sold
Very highly detailed remote control kit. Features control box, all wiring, dual gear boxes and dual RE-14 motors. Motors were usually not included with these kits, but there are present in this one. NOTE: the crew member has been neatly assembled. Quality of assembly is excellent. No other assembly. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Hasegawa Vought F-8E (FN) Crusader with Black Box Cockpit, 1/48, 09580
Plastic Model Kit, Box Condition: Exc+++
Sold
Beautifully molded kit includes unopened Black Box #48073 F-8E Crusader cockpit Set for this kit. Model includes large and very colorful decal sheet for the special markings aircraft. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Italeri Fiat BR-20 Bomber Italian - Japanese or German Air Forces, 1/72, 143
Plastic Model Kit, Box Condition: Exc
Sold
Includes decals for all variants. The BR-20 first flew in 1936 and quickly became the best of the Italian medium bombers. In 1939 it set a new world record in it's category of an average speed of 400 kp/h. It saw action in the Spanish Civil war and with the Japanese in Chica. The Germans used the BR-20 in the Mediterranean and the aircraft was even exported to Venezuela. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Dyna-Products Republic P-47D Thunderbolt Wood and Metal Model Airplane
Wood and Metal Model Kit, Box Condition: Exc
Sold
In the 1930s and 1940s, most modelers built the flying stick and tissue type kits with rubber, co2 or gas power. But there were a small but measurable percent that built solid aircraft display models of great detail. This required great skill worthy of the shipbuilders of old, especially considering the limited offerings. Many manufacturers issued blocks of wood and a plan - the famous (or infamous) 'Make Wood Look Like Plane' kits. A few manufacturers, like Dyna-Model Products Company, attempted to provide true-scale static models with a high level of detail. Today Dyna-Models are legendary and sought after collectibles. When you first open the kit, you see a black and white cardboard display with all the needed jigs and templates for assembly. Underneath, the fuselage and all other parts are rough cut or die cut. Includes a vacuform canopy, color decals, full size and well-detailed plans and the crowning jewel, a box of 39 finished metal castings for super detailing your aircraft. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Carl Goldberg Models Hi Thrust Viking - 48 inch Wingspan .049-.051 Gas Free Flight Airplane, G10
Wood Model Kit, Box Condition: NM-
Sold
Large parasol design for sport or competition free flight. Carl Goldberg was a gifted designer of model aircraft, and his career spanned the evolution of flying models. His designs and number of titles won in competition at the Nationals is legendary. His first competition was the 1928 Nationals, where he received honorable mention. By 1934 he won the indoor Nats and in 1935 he opened a Hobby Shop, among the first in the nation (the first one was probably opened by Cleveland Models Ed Packard). Awards came quickly. He wrote articles for Model Airplane News, and was Comet's top designer from 1939 till 1945. After Comet, he worked with Mike Schlesinger and Sid Axelrod on what eventually became Top-Flite Models. In 1955 he founded Carl Goldberg Models and released a still-popular line of scale, rubber, gas, glider and RC models. Needless to say, Goldberg's kits are of the highest quality. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Midwest Fortastrop - 36 inch Wingspan Free Flight Airplane for Sport or Competition, FG-6
Wood Model Kit, Box Condition: Exc
Sold
From the 1940s. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and gas powered models, all powered by Brown engines, took home so many awards that they were forever separated from rubber powered models. Design of gas models was tricky since RC could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all without any operator inputs once the airplane took off. Getting the wing up out of the propeller airflow was a huge improvement, and this type of design proliferated. This is one example of a parasol style 1940s free-flight competition aircraft designed by FS Garcher. Quality kit includes printwood, strip wood, wheels, tissue and beautiful full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Midwest Wally Simmers' Gollywock - 32 inch Wingspan Class C Stick Model, S-1
Wood Model Kit, Box Condition: Exc
Sold
Another successful design for Class C Stick National Competition by Wally Simmers. Climbs at 1200 feet/min on rubber power with a glide angle of 10 to 1. Large and graceful. Features colored tissues, printwood, carved prop, hardwood and beautiful full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
California Model Co Fokker D-VII - 21.75 inch Wingspan Balsa Flying Model Airplane
Wood Model Kit, Box Condition: Exc++
Sold
Probably from the 1940s. Stick and tissue flying model kit to a constant 1/16 scale with very nice quality. Made by California Model Company out of Long Beach, CA USA. If you have more information on this manufacture, please email me. Kit can use rubber, CO2 or small gas motors for power. Features covering material, quality balsa printwood and strip wood, blocks as needed and beautifully drawn full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
California Model Co SPAD XIII - 18.75 inch Wingspan Balsa Flying Model Airplane
Wood Model Kit, Box Condition: Exc++
Sold
Probably from the 1940s. Stick and tissue flying model kit to a constant 1/16 scale with very nice quality. Made by California Model Company out of Long Beach, CA USA. If you have more information on this manufacturer, please email me. Kit can use rubber, CO2 or small gas motors for power. Features covering material, quality balsa printwood and strip wood, blocks as needed and beautifully drawn full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.