Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airmodel Douglas C-117 / R4D-8 / DC-3S Super DC-3 - Bagged, 1/72, 261

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory bag sealed. Very nicely molded with fine recessed panel lines. Includes full plans and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Farpro Mitsubishi A6M2 Type 21 Zeke Zero (ex-Aoshima), 1/72, 107

Plastic Model Kit,   Box Condition: Exc

Sold   

From Aoshima molds. This model is intended to be motorized with the Mabuchi Baby motor and includes all needed parts with the exception of the motor, which had to be purchased separately. Kit features retractable landing gear, rotating prop, folding wing tips, optional position canopy and operating flaps. This kit has not been started. The parts are either still in the factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Matchbox Handley Page HP-58 Heyford Mk.III - Mk.I and Mk.II, 1/72, PK605

Plastic Model Kit,   Box Condition: Good-

Sold   

The Heyford was the last big biplane bomber to serve with the RAF and equipped 11 First-Line Squadrons at the time. The prototype first few in 1930 and had many novel features such as retractable ventral turret and the wing attached to the underside of the top wing for excellent visibility. It was soon nicknamed 'Express Bomber' due to it's ability to carry a large bomb load, fly at high speeds and be rapidly re-armed, serviced and repaired. Has parts and decals for all three variants from 102(B) RAF Sq. 1938, No. 99 Sq 1934 and No. 7(B) Sq. 1935. Never started. Kit is either 100% inventoried with all parts/decals and instructions or is factory sealed/factory sealed internal bags. NOTE: box, instructions and decals are water damaged.

Matchbox Curtiss SBC4 (SBC 4) Helldiver - US Navy USS Enterprise SV-6 or RAF Cleveland 1 'A' Flight 24 Sq Hendon 1940, 1/72, PK-35

Plastic Model Kit,   Box Condition: Exc+

Sold   

Contains decals for either version. USN version is 'Hi-Vis' with silver dope and yellow wings. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Wen-Mac Wen-Mac 1957 Chevrolet 'Funny Car' Track Racer - 12 inch long Gasoline Powered Racer, 1/17

Metal and Plastic Model Kit,   Box Condition: No Box

Sold   

From about 1964. This is the popular gas powered '57 Chevy with a metal frame, Wen-Mac motor, plastic body with chrome plated parts and real rubber tires. This example does not include the box but is in otherwise exceptional condition. I do not think that it was run more than once or twice then it was stored in a climate controlled environment. The chassis is not rusted and appears almost as new, as is the motor and gas tank. The exterior of the car is as new with no cracks, no broken parts, excellent factory-painted '7 B/GS' on the doors and mint 'Delco Shock Special' decal on the deck lid. The chrome is excellent and I would grade it 8 out of 10. All four wheel knock-offs are intact and tire wear is minimal - you molding line on the rear drag slicks is still evident. The interior and driver are as new, and the clear front and rear windshields are very good also.

R&L 1926 Bugatti GP Racer - Bagged, 1/67

Plastic Model Kit,   Box Condition: No Box

Sold   

Still factory sealed. Very well detailed and molded. Features interior seats, instrument panel, steering wheel and rotating wheels. Small scale model from Australia. R&L marketed these kits independently and they were also sold as the Aurora Snaparoos, copied by Sunny (Korea) and in Kellogg's Cereal as premiums.

Entex Chevrolet Corvair Monza GT, 1/25, 9117

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still in the factory seal. 1/24 scale kit of one of the best looking Corvairs. Original mold origins are unknown.

Lindberg Fulton's Steamboat Clermont Motorized, 1/96, 789M-400

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still in the factory seal. Large 18 inch long kit with very good detail and realistic motorization. An electric motor works through complex gears to run the paddles like the real boat.

Polar Lights Odd Job from the James Bond Film Goldfinger, 1/8, 5036

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

From the original Aurora molds. Still factory sealed.

Mattel Mattel Vac-U-Form Machine (Vacuform), 0422

Multimedia Model Kit,   Box Condition: VG++

Sold   

From 1962. This is the original Mattel Vacuform machine in mint condition inside The box has wear outside, but has been in climate controlled storage since 1962. The presentation cardboard is complete and excellent. The original electrical cord has never been uncoiled from how the factory stored it. Included all molds, all stock plastic, glue, paints, instructions, etc. in excellent condition. Here is a link to a website that sells repair and improvement parts for this machine: http://www.gaugepods.com/vacuform/index.htm

Bel Decal Seven 5x11 Inch Clear Inkjet Decal Sheets - Bagged

Cardstock Paper Model Kit,   Box Condition: VG++

Sold   

7 full sheets of very high quality Bel Clear Decal paper for inkjet printers. Includes full instructions. Brand new and never used. Smaller sections of partial sheets are included as well, so you will receive more than 7 sheets.

Renwal The Visible V8 (V-8) Transparent Motorized Operating Auto Engine, 1/4, 802

Plastic Model Kit,   Box Condition: Exc

Sold   

The original issue from the 1950s. Classic motorized kit with over 100 moving parts. The outer box displays very well - color and gloss are excellent. It has four solid corners, no tape or price tags and no missing or torn litho. There is light age wear as shown. All internal cardboard and cello display packing is complete and excellent. Includes the Renwal parts order sheet, instructions and original V-8 booklet. When built, all major internal parts move via electric motor and spark plugs (red lights) flash in time. This kit has never been started. It has been inventoried 100% complete with all parts.

Lincoln Lockheed Constellation - BOAC, 1/140, 102

Plastic Model Kit,   Box Condition: Exc+

Sold   

In 1956/57, Lincoln leased or purchased some Hawk molds and this Constellation is one of those. Nicely done 1/140 scale model with full color BOAC decals. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions. Lincoln International was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.

Revell Lockheed Electra American Air Lines - Master Modelers Club Issue, 1/115, H255-129

Plastic Model Kit,   Box Condition: Exc+

Sold   

Very rare 1961 Master Modelers Issue. The box art is the same as the 'S' kit, but the long box sides show the 'Whip Fly' line on one side and the 'Picture Plane' series on the other side. Molded in gloss silver just as the 'S' kit, and includes the same instructions and clear 'Globe' base also. Revell issued a revised decal sheet with this kit. It has the same colorful American Airlines markings but they removed the stand base decal - and this was when they were phasing out the stands from most all kits (although the famous 'Globe' was discontinued at this time, some kits did receive a simplified stand). The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions. The instructions are all there, but have some wear and two tears - one about 2 inches long and one about 5 inches long. The kit does not included an Master Modelers stamps or trading cards.

Monogram 1965 Chevrolet Corvette Stingray Coupe, 1/8, 2600

Plastic Model Kit,   Box Condition: VG-

Sold   

Very large 1/8 scale model that measures 22 inches long when assembled. Nicely detailed and well molded kit. Features complete 327 CID Fuel Injection engine and detailed engine compartment, opening hood, exhaust, suspension and chassis detail, steerable front wheels, complete interior, headlights that open and close and more. Molded in bright gloss red, black, clear and chrome and with real rubber tires. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

Entex Boeing 727-200 - United or American Airlines, 1/100, 8508

Plastic Model Kit,   Box Condition: Exc+

Sold   

Large scale model measures 18 inches long when assembled. Excellent detail including rear airstair and very large colorful decal sheets for United and American Airlines in very good condition. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Revell Consolidated PBY-5A Black Cat Catalina Flying Boat - Advent Issue, 1/72, 3412

Plastic Model Kit,   Box Condition: Exc++

Sold   

1979 Revell 'Advent' issue of the classic Revell 'Black Cat' PBY-5A kit. Features retractable floats, rotating wheels and propellers and two crew members. Molded in black and clear plastic. The model has never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.

Lindberg CV-21 USS Boxer (Essex Class) Attack Carrier, 1/520, 7312-300

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. 1972 issue. The only larger scale injection molded kit of the Boxer. Full hull model.

Skywave Asakaze DDG-169 JMSDF - Destroyer - With P-3C Orion And HSS-2B Helicopter, 1/700

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

A very highly detailed waterline model with numerous pieces and the aircraft & helicopter. With extensive decals for the ship and both air assets. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Comet P-47D Thunderbolt 24 inch Wingspan Balsa Flying Model Airplane, Y3-129

Wood Model Kit,   Box Condition: Good

Sold   

Desirable 'Coke' bottle box art showing the youngster's busy workbench with frosting coated cookies and an ice cold Coke. Large 24 inch wingspan issue stick and tissue model. Never started. Missing one part: one wheel. Complete with all other parts/plans/markings. Box has clear tape repair neatly done on one side and where that side joins the bottom.