Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa F-86F-40 Sabre All Transparent Hi-Grade Issue, 1/32, SK006

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Rare. Still factory sealed but the seal has split. High grade kit with cast metal and photoetched details, tubing detail, rubber tires, color painting guides, all transparent parts and highly detailed interior with J47 engine.

Renwal CV-38 USS Shangri-La Aircraft Carrier with Regulus I Missiles (Essex Class Angled Deck), 1/500, S600-198

Plastic Model Kit,   Box Condition: Good++

Sold   

NOTE: Builder kit only - please read carefully. Rare. Very nicely designed and molded Renwal kit. This model is considered the finest injection molded kit of the angled deck Essex class aircraft carrier. Features one piece hull with display stand, rudder, propellers and shaft alleys, very detailed separately molded hull sides, full primary and secondary AA guns with directors, highly detailed island structure with radars, direction finders, signal lights and more, separately molded life rafts and whip antennas, rotating cranes, Grumman F9F-8 Cougars (5), folded wing Cougars (7), A-3D Skywarrior (2), helicopter, three Regulus missiles with two trailers and one launcher, full decals including draft markings and more. NOTE: this kit has been started. Steps one and two are done. This means that the bare hull is done - bulkheads have been glued into place, along with the anti-aircraft platforms, AA guns and two side elevators. The flight deck has not been glued to the hull, but four small directors have been glued to the flight deck. This is the only assembly. Quality of assembly is 'very good'. The elevators go up and down as they should and all parts are properly glued. The only issue with the assembly is the occasional use of just a little bit too much glue around the AA guns; not excessive, but it is evident. NOTE: missing one single barrel AA gun. Inventoried complete with all other parts, decals, flags and instructions. NOTE: some parts have damage as follows: many AA gun barrels are broken off and missing. They will need to be replaced with stock cylinder plastic. One prop blade is broken but present. One helicopter blade is broken off and missing. The tails for 5 Cougars (wings not folded) are broken off and missing. At least one elevator is broken off one A3D.

Special Hobby Mc Donnell XF-85 Goblin, 1/48, 48003

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Unique parasite fighter to be carried under the B-36. Well detailed with many resin detail parts.

Matchbox PB4Y-2 Privateer Liberator - USA / French Navy or RAF RY3 C.Mk.IX - (PB4Y2), 1/72, PK606

Plastic Model Kit,   Box Condition: Poor

Sold   

Single-tailed B-24. Well detailed model. Large, colorful decal sheets allows you to built as US Navy, French Navy or RAF. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. NOTE: box, instructions and decals are water damaged.

Matchbox PB4Y-2 Privateer Liberator USA / French Navy or RAF RY3 C.Mk.IX - (PB4Y2), 1/72, PK606

Plastic Model Kit,   Box Condition: Exc

Sold   

Single-tailed B-24. Well detailed model. Large, colorful decal sheets allows you to built as US Navy, French Navy or RAF. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Valhalla Hansa W.12 (W-12) Floatplane, 1/72, 001

Resin Model Kit,   Box Condition: VG+

Sold   

Very nicely cast older resin kit with fine metal details. Cast parts included a beautiful engine and exhaust manifold, radiator, seat, 2 machine guns and more. Resin parts have recessed and raised detail as appropriate. Includes airfoil shaped strut material, decals and instruction. Never started and inventoried complete.

Monogram Consolidated PBY-5A Catalina with Rubber Tires, 1/104, P8-98

Plastic Model Kit,   Box Condition: Exc+++

Sold   

Rare 1st issue with 'P' kit number and rubber tires. Dated 1955. The box is in excellent condition. The second issue has a 'PA' part number prefix instead of 'P'. The 'P' series was issued for only a year or less. With correct P8 instructions and decals. Never started. Inventoried with all parts, decals and instructions present.

AMT-Hasegawa Republic F-105D Thunderchief, 1/72, A656-130

Plastic Model Kit,   Box Condition: Exc+

Sold   

Includes decals and color paint guide for Camo or Silver Hi-Vis Markings. This kit is part of an early effort by AMT to market quality Hasegawa kits in the USA. Hasegawa made the kits and decals in Japan and shipped them to AMT, who supplied the boxes and marketing. Never started. Factory sealed bag or 100% inventoried with all parts/decals and instructions present.

Revell USCG Cutter Eagle - 'S' Issue, 1/254, H347-298

Plastic Model Kit,   Box Condition: VG++

Sold   

First issue dated 1957. The box has brilliant gloss and color. There is light edge wear and all four corners are solid. The box would grade higher but there is a tape tear on one long side and a crease on one short side. As with most early Revell sailing ship kits, it is very nicely molded and well detailed. Includes rigging instructions, rigging material and vacuform billowing sails. Molded in three colors - ivory, light wood tan and dark brown wood. The kit has never been started. Inventoried 100% complete including decals, flags and instructions. The 295’ bark rigged sailing ship was built in 1936 in Bremerhaven, Germany, for the German Navy. It was originally named Horst Vessel. The vessel was acquired in 1946 as a World War II war reparation. The ship was named the U.S. Coast Guard Cutter Eagle, and has been used ever since as a training ship for future U.S. Coast Guard Officers. Eagle is based in New London, Connecticut.

Revell Space Shuttle Enterprise and Space Lab, 1/144, H200

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

1978 issue. Features clear windshields, removable ESA Space Lab cargo, opening cargo bay doors and detailed interior, optional position manipulator arm and landing gear. Includes display stand and astronaut figures.

Airfix Britten-Norman BN.2 Islander (BN-2) - Aurigny Air Service, 1/72, 02041-7

Plastic Model Kit,   Box Condition: Good

Sold   

Very nicely detailed kit. Includes optional position entry and cargo doors, rotating props, and colorful decal sheet with full pin-striping as shown on box art. Includes decals for G-AWBY and G-AWVY. The kit has never been started. NOTE: missing one prop retainer. Otherwise inventoried with all other parts, decals and instructions.

Airfix HMS Tiger C20 Cruiser, 1/600, 03201-0

Plastic Model Kit,   Box Condition: Good++

Sold   

Very nicely molded full hull model with fine details. The kit has never been started. Inventoried 100% complete including decals and instructions.

Airfix HMS Daring Destroyer Craftmaster Issue, 1/600, S1-39

Plastic Model Kit,   Box Condition: Exc++

Sold   

Action packed Craftmaster artwork. Well detailed and mold kit like most Airfix ships. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Frog McDonnell Douglas A-4H/A-4K Skyhawk - Israeli Air Force 1970 / 75th Squadron Royal New Zealand Air Force (RNZAF) 1970 - Orange Series, 1/72, F271

Plastic Model Kit,   Box Condition: Exc

Sold   

Well detailed and molded. Includes decals and parts for for both options/aircraft as well a large load of missiles, bombs and drop tanks. This kit has never been started. It is either still in the internally sealed factory bag or has been inventoried 100% complete with all parts, decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.

Aurora Boeing 747 Jumbo Jet - Braniff International Air Lines, 1/156, 358-300

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still mint in the factory seal. Colorful 1972 issue with full color Braniff markings, clear windshield, detailed 18 wheel landing gear and large display stand. The kit is molded in 'Great Pumpkin' orange.

Monogram F-4J Black Bunny Phantom II, 1/48, 5805

Plastic Model Kit,   Box Condition: Poor

Sold   

1981 issue. High quality kit that Monogram was famous for. Includes full cockpits, AIM-7F Sparrow II and AIM-9 Sidewinder Missiles, bombs and drop tanks. Optional position canopies. Detailed landing gear and wheel wells. NOTE: two drop tanks are assembled. Quality of assembly is 'excellent'. The drop tanks are a different color plastic but are correct; they are from a later issue. There is no other assembly and no painting. Inventoried with all parts, decals and instructions present. Box is completely ruined, hence the grade of 'poor'.

Renwal See-Thru SSBN 618 Thomas Jefferson Polaris Nuclear Submarine, 1/200, 653-298

Plastic Model Kit,   Box Condition: Exc+

Sold   

Classic 1950s boxart at it's finest. 'Excellent+' condition box with like-new color and gloss, four solid corners, no tape, price tags or tape/tag residue. Light general wear as shown is the only flaw. Large 24 inch long kit with clear right half that is hinged to open. The Jefferson is the only Renwal sub that has the clear hull half - all others have a gray hinged half. The clear half is in excellent condition and still wrapped in the protective factory paper. Heavily detailed interior and actual 'launching' Polaris missile from a spring loaded tube. This kit has never been started. All parts have been inventoried 100% complete including decals, Renwal Guarantee Sheet and instructions.

Hobby-Time Gloster Meteor 8, 1/56, 282

Wood Model Kit,   Box Condition: NM

Sold   

1950s Solid wood model. Includes clear canopy/plastic stand-details/decals. 100% complete and unstarted.

Historex Historical Figures -Napoleonic Era Man and Woman - Bagged, 1/32

Plastic Model Kit,   Box Condition: Sealed

Sold   

This model was made in France and includes a western adult man and woman in 1/32 scale. The figures are molded nude and are very detailed. The arms are positionable. The instructions have patterns for clothing that appears to be European Napoleonic era. The bag is still factory sealed.

Lindberg 1963 Ford Mustang II - Original Ford Concept Car, 1/25, 72169

Plastic Model Kit,   Box Condition: Sealed VG+++

Sold   

Still factory sealed. Nice kit of the original Concept Mustang. Has 103 parts. Features detailed 289 Cobra V-8 engine, optional tri-power carbs, opening hood, doors and trunk, positionable front wheels, complete interior with slab back bucket seats, full instruments and three spoke steering wheel and optional tops with 2+2 Fastback, hardtop, convertible or speedster.