Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AMT 1959 El Camino Chevrolet 3 in 1 Customizing Kit - Stock / Custom / Racing, 1/25, 2759-170

Plastic Model Kit,   Box Condition: VG

Sold   

Rare early issue from 1959. Can be built as factory stock, beautifully customized by the Alexander Brothers or as a race car. Very nicely molded and detailed model. Stock version features 348 CID engine with 3x2 and correct large air cleaner, detailed engine compartment, opening hood, molded in chassis detail with separately molded rear and front suspension, drive shaft, shocks, sway bar, lower control arms and more, full interior and opening tail gate. Other versions include a blown Cadillac engine, racing exhaust headers, custom open wheels or chromed wheels with knock-offs, interior with center console, 'Cal Custom' T shifter and Sun Tach, bed tonneau cover with hydraulic lifts, recording console, lake pipes, custom tail lights, spotlights and full custom front end. Molded in white, clear, red-tint clear, chrome and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Grumman F4F-4 Wildcat - (F4F4), 1/32, H299-250

Plastic Model Kit,   Box Condition: VG

Sold   

Second issue from 1970. Features detailed cockpit, sliding canopy, pilot figure, rotating wheels and props and removable cowl to show the Pratt and Whitney R-1830 engine. Never started. Inventoried complete with all parts, decals and instructions present.

Revell Kawasaki Ki-61 Hien 'Tony', 1/32, H276-1000

Plastic Model Kit,   Box Condition: VG+

Sold   

Revell Japan hardbox issue with a large color print of beautiful Hien Artwork. This doubles as a painting guide as decals are included for this aircraft and 4 others (5 total). Very nicely detailed kit. Features full engine detail with removable cowling panels, complete cockpit, optional position landing gear and canopy, and rotating wheels and propeller. Never started and all parts are still sealed in the factory bags.

Revell CA-72 USS Pittsburgh Heavy Cruiser (Baltimore Class), 1/490, H457-200

Plastic Model Kit,   Box Condition: NM

Sold   

Hardbox issue from 1967 in exceptional 'Near Mint' condition. The colors and gloss are as new and all four corners are solid. Full hull kit is over 16 inches long when assembled. Features movable guns and turrets, complete secondary and AA gun mounts, detailed deck, scout planes, crane and more. Never started. Inventoried complete with all parts, flag sheet and instructions present.

Monogram Grumman F3F-3 Fighter - (F3F3) - Blue Box Issue, 1/32, PA186-200

Plastic Model Kit,   Box Condition: Exc

Sold   

2nd issue of this kit with the "Blue Box" dated 1967. Very highly detailed. The kit has many action features: When you pull the prop outward and rotate it CCW, the landing gear retracts. Pull it outward and rotate it CW, and the gear extends. Push the prop in, and it freewheels as normal. Kit features a movable control surfaces, highly detailed cockpit, full decals, sliding canopy and instructions for rigging. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Airfix Supermarine Walrus II, 1/72, 1404

Plastic Model Kit,   Box Condition: Exc++

Sold   

First Airfix logo. Bagged kit with paper header. Kit has been very neatly opened and resealed. Never started. 100% complete with all parts, decals and instructions.

Airfix HMS Hood British Battlecruiser - Type 2 Issue, 1/600, F4025

Plastic Model Kit,   Box Condition: Exc+

Sold   

1950s issue with the second type box. Very finely molded and detailed full hull kit like most early Airfix ships. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Revell USS Enterprise CVN65 Aircraft Carrier, 1/720, H489

Plastic Model Kit,   Box Condition: VG++

Sold   

1972 issue. Can be built as a waterline or full hull model with complete rudder and propeller detail. Features detailed superstructure and deck, optional position elevators, Sea Sparrow missile battery, display stand and a 30 count airwing of E-2 Hawkeye, Vigilante, A-4 Skyhawk, F-4 Phantom and A-6 Intruder aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Frog Hawker Tempest V - No. 3 Sq RAF Wing Cmdr Pierre Closterman (Free French Ace) or RAF 274 Sqn - Bagged, 1/72, F189F

Plastic Model Kit,   Box Condition: Sealed Fair+

Sold   

Factory sealed bagged kit with header. Quality Frog molds that build into a realistic kit. Includes decals for No. 3 Sq RAF Wing Cmdr Pierre Closterman (Free French Ace) with 33 kills and No. 274 Sq RAF. Features separately molded rudder, elevator and ailerons with optional weapons load of bombs, drop tank or rockets.

AMT 1965 Pontiac GTO 3 in 1 - 2 Door Hardtop, 1/25, 6593

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Includes all parts to build this model stock, custom or drag. Features detailed engine with tri-power carbs, detailed engine bay, removable hood, detailed chassis and full interior.

Aurora Hiller X-18 Convertiplane, 1/70, 146-100

Plastic Model Kit,   Box Condition: Exc+++

Sold   

Rare ex-Comet kit. When Aurora bought the Comet molds in 1963, they released this kit the same year but never again. Features recessed panel detail, spinning counter-rotating props and tilting wing. The 'Grandfather of the V-22 Ospry'. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

AMT Chevy Titan 90 Semi Tractor Truck, 1/25, T509

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Super detailed truck with over 250 parts. Features full rolling chassis build up just like the actual vehicle. Many chrome plated parts and hollow vinyl truck tires.

MPC Grumman F4F Wildcat Profile Series - VF-41 USS Ranger 1940 / Butch O'Hare's CV-2 Lexington Aircraft Coral Sea - FAA Martlet I, 1/72, 2-1112-100

Plastic Model Kit,   Box Condition: Exc++

Sold   

In the 1970s, MPC released the very popular Profile Series. Inside each box was a quality Airfix kit but with MPC decals to build any of the three aircraft shown on the box top. The kit has never been started. Internal factory sealed bag including decals and instructions.

MPC Junkers Ju-87B Stuka Profile Series - 2/Trop. 4/St.G2 'Immelmann' Libya 1941 - Gruppe Stuka Geschwader Z 'Immelmann' Eastern Front - 2/Trop. 1/St G1 Libya 1941, 1/72, 2-1107-100

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. 1970s issue of the popular 'Profile Series'. Very cleanly molded kit with decals for all three aircraft listed. Airfix molded these kits in England, sealed them in bags and shipped them to MPC. MPC added the decals, instructions and box and marketed them through numerous outlets in the USA including hobby shops, grocery stores, dime stores and department stores. This arrangement with Airfix was older than the Profile Series, dating back to when the very colorful Airfix 'Craftmaster' kits were marketed in the USA.

MPC Hawker Hurricane Mk.I Profile Series - RAF No. 85 Squadron Church Fenton 1940 / No. 174 Squadron 1941 / No. 17 Squadron Debden 1940, 1/72, 2-1111-100

Plastic Model Kit,   Box Condition: Exc+

Sold   

The MPC Profile Series was a very popular model line in the 1970s. Using quality Airfix molds, MPC hit upon an excellent marketing plan. The kit includes one aircraft but markings for all three. The kit has never been started. Inventoried 100% complete including decals and instructions.

Scale Flight Comet's Aeronca Seaplane PC-3 - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

Sold   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Scale Flight Comet's Aeronca Low Wing - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

Sold   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Union 1948 Ford Convertible - Also Includes Parts For 1946 And 1947, 1/25, MC09-1500

Plastic Model Kit,   Box Condition: Good+

Sold   

Very well detailed kit with optional parts to build a 1946, '47 or '48 vehicle. Features an accurate rolling chassis build up just like the real car, complete drive line, excellent front and rear suspension, full exhaust, complete engine (stock or 427 CID custom), opening hood, full interior, opening doors, front seats that fold forward and more. The convertible top can be displayed up or down with boot. There are numerous other parts and features for the custom version. Molded in white and clear with chrome plated parts and rubber tires. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Airfix Auster 6 Antarctic - T3 Issue Bagged, 1/72, 103

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 1960s issue type three logo bagged kit with header. The Auster 6 Antarctic was a specially modified aircraft supplied to the Antarctic expedition. It has additional fuel capacity and more elaborate radio and DF equipment. The Auster was first introduced during WWII as an artillery observation and liaison aircraft. Since that time it was progressively developed for both military and civil use. The ability for short field operation and use with wheels, skis or floats made it very popular at the time.

Hasegawa F-4E Phantom II IDF - Israeli Air Force 201st Sq '718' / 119th Sq '606', 1/72, 00297

Plastic Model Kit,   Box Condition: Good

Sold   

Very highly detailed kit from newer tooling. Features all very fine recessed panel lines, very well detailed cockpit and ejection seats, optional position canopies, detailed gear wells, centerline and wing drop tanks, decals and paint guide for the two aircraft listed and more. The kit has never been started. Internal factory sealed bag including decals and instructions. Box has light damage to the top, but the kit inside is mint.