Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Heller La Providence 'Cadet' Series, 1/240, 070

Plastic Model Kit,   Box Condition: Good

Sold   

Small scale ship model. Never started. Missing the two anchors. Complete with all other parts and instructions.

Aurora The Banana Splits - Banana Buggy with Fleegle - Bingo - Snorky and Drooper, 1/32, 832-150

Plastic Model Kit,   Box Condition: Exc++++

Sold   

Very rare. Kit features one Banana Buggy which can be built as one of four on the TV show. Also has four figure models of the four Splits: Fleegle, Bingo, Snorky and Drooper and a bench. Never started. Inventoried 100% complete with all parts, decals and instructions.

Lindberg Boeing B-17G Bomber, 1/64, 525-249

Plastic Model Kit,   Box Condition: Good

Sold   

1950s 2nd issue with dramatic box art by Ray Gaedke. Inside, the kit is inventoried 100% complete with all parts, decals and instructions. Features complete crew, moveable control surfaces, rotating and elevating turrets/guns, retractable landing gear and clear adjustable display stand. Box has light stains and a litho tear on one side corner.

Topping McDonnell RF-101 Voodoo Factory Desk Top Model, 1/72

Plastic Model Kit,   Box Condition: Good

Sold   

Rare Factory/Desk Promotional model produced by Topping for McDonnell. These models were given to Air Force 'Project Decision Makers' and pilots as promotional items by McDonnell. Model is complete with the original stand. It has never been broken and there are no cracks. Paint and decals are 100% original with no touch up. The paint has great gloss and minimal wear. I would grade the paint as 'Exc++' and the decals as 'Exc'. There is general light decal wear, the worst of which is one of the 'FB-494' number on the lower right engine and one underside camera panel. This can be repaired if you have the ability to make simple decals on an inkjet printer. The stand would rate NM with the "McDonnell RF-101 Voodoo" and stylized aircraft as mint. Insurance required for shipment.

IM DH Venom FB 4 Bagged, 1/50, 4

Plastic Model Kit,   Box Condition: Good

Sold   

Has movable control surfaces (wings only), tip tanks, drop tanks, display stand and can be built with the landing gear up or down. Still factory sealed with decals and instructions.

Precise Grumman EA-6B Prowler Factory Desk Top Model, 1/48

Plastic Model Kit,   Box Condition: Good

Sold   

Rare Factory/Desk Promotional model produced by Precise or Topping for Grumman. I have listed the manufacture as Precise, but I am not certain between the two. Large scale model is complete with the original stand. It has never been broken which is remarkable considering the fragile nature of this model. There are no cracks. Paint and decals are 100% original with no touch up. I would grade the paint as Exc++++ and the decals the same. The only decal wear is one of the straight black panel lines on the wing for about .6 of an inch. This can be easily repaired. The stand would rate NM with the "Grumman EA-6B" script as mint. Insurance required for shipment.

Renwal Reptile Science Leopard Frog/Alligator/Rattlesnake/Box Turtle/Chuckwalla/Red Eft, 808

Plastic Model Kit,   Box Condition: VG++

Sold   

Large and well crafted science assembly kit. Leopard frog rotates to show internal configuration and cut-away views. Includes large stand as shown. All parts are still in sealed bags. Complete with 'Reptiles and Amphibians' color book and instructions.

Lindberg Heinkel He-162, 1/72, 1119

Plastic Model Kit,   Box Condition: Good

Sold   

Never started. Factory sealed bag or 100% inventoried with all parts/decals and instructions present.

Frog Westland Wyvern Bagged, 1/72, F198

Plastic Model Kit,   Box Condition: Good

Sold   

Bagged kit. No box or header. Still factory sealed. Very nicely molded kit with no rivets - just fine panel lines. No decals or instructions.

Testors 1/48 US Navy Flight Deck Crew, 1/48, 518

Plastic Model Kit,   Box Condition: Good

Sold   

Still factory sealed. Contains 9 flight deck figures, many are can have arms glued on in any position.

Gull Models Dewoitine D.520 (D-520) with Metal Details and Decals, 1/48

Vacuform Model Kit,   Box Condition: Good

Sold   

Very high quality vac kit. Features metal wheels, struts, exhaust, prop blades and tail wheel with a very colorful decal sheet for three aircraft. Vac moldings have fine recessed panel lines and are of just as high or higher quality than many injection molded kits. Never started and complete.

Vac Wings Fokker D.XXI (D-XXI D-21), 1/48, VW4824

Vacuform Model Kit,   Box Condition: Good

Sold   

High quality vac kit with fine recessed detail. Never started. Vac parts are untouched, but metal prop/engine are missing (parts from Hawk Lysander kit work well for this). Missing decals.

Vac Wings Chance Vought O2U-1 Corsair with Metal Details and Decals, 1/48, VW488

Vacuform Model Kit,   Box Condition: Good

Sold   

High quality vac kit with metal engine/prop, injection molded struts and full USN and Marine decals. Features fine recessed panel line detail. Complete and never started.

Falcon Focke-Wulf TA-152H, 1/48

Vacuform Model Kit,   Box Condition: Good

Sold   

Very high quality complete vac kit. Features fine raised panel lines with recessed control surfaces and all parts for assembly including canopy, prop, wheels, struts, wheels and more. Never started. Complete with all parts and instructions.

Falcon Royal Aircraft Factory B.E.2c (BE-2), 1/48

Vacuform Model Kit,   Box Condition: Good

Sold   

Very high quality complete vac kit. Features raised panel lines with recessed control surfaces and all parts for assembly including cockpit, prop, wheels, struts undercarriage and more. Never started. Complete with all parts and instructions.

Falcon Bf-109G-12 and FW-190S-8 Two Seat Conversions, 1/48

Vacuform Model Kit,   Box Condition: Good

Sold   

High quality vac conversion that makes a two seater FW-190 and two seat BF-109G-12 in 1/48 scale.. Includes full fuselage, canopy and many other parts. Features fine recessed surface detail and full instructions. Never started and complete with all parts. There was originally a third conversion with this kit and it is missing.

Unknown XF-85 Goblin, 1/48

Resin Model Kit,   Box Condition: Good

Sold   

Very high quality cast resin complete kit. Has fine recessed panel lines. Still factory sealed with clear canopy. Does not come with instructions or decals.

Unknown Yak-7, 1/48

Resin Model Kit,   Box Condition: Good

Sold   

Very high quality cast resin kit with wheels, struts, prop, radiator, tailwheel and many other details. Has fine recessed panel lines. Still factory sealed with clear canopy. Does not come with instructions or decals.

WK Models Messerschmitt Me-410 A2/U4, 1/48

Resin Model Kit,   Box Condition: Good

Sold   

Limited edition - one of only 100 made. Very high quality kit cast in high-definition resin. Excellent detail and fine recessed panel lines. Complete kit includes all details which are still sealed in factory bags. Never started. Includes full instructions. Kit did not come with decals.

Horizon Conversions Canopy for Focke-Wulf Fw-190D-F-G, 1/32, 3206

Vacuform Model Kit,   Box Condition: Good

Sold   

Upgrade clear vac canopy for 190D, 190F or 190G. Never used and complete with instructions.