Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Amodel Messerschmitt Bf-109F2 RZ65 - With Rauchzylinder Launchers - (Bf109 F2RZ65), 1/72, 7248

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Injection molded model of this unique '109 with missile housings built into the wings. These Rauchzylinders were also tested on Bf110, He111 and Me210 aircraft.

D&S Resin Me-109G (Bf-109G) - Experimental V-Tail (VJ-WC - werk no. 14003) Conversion, 1/72, C1

Resin Model Kit,   Box Condition: Sealed

Sold   

Rare cast resin conversion to make the V tail '109. Requires a base kit - Hasegawa 1/72 Bf-109G - to complete. Contains new aft fuselage section and rudders/elevators. Still factory sealed. Contains full and detailed instructions on the conversion and this unique aircraft. NOTE: rudders have warped, as is usual with fine, thin resin castings. You must be familiar with bending resin under hot water to make them straight again.

Eduard Polikarpov I-16 Type 10, 1/48, 8466

Plastic Model Kit,   Box Condition: Good+

Sold   

Features all fine recessed panel lines, very good cockpit detail and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Kajika Kongo 1914 - Early Imperial Japanese Navy Battlecruiser, 1/700, KM70001

Plastic Model Kit,   Box Condition: Exc+

Sold   

From 2016. Very finely injection molded kit that is highly detailed. This appears to be the Kongo in her near 'as launched' configuration in 1914. Please note that when you purchase this kit, you get much more than a model...you also receive a card inside from the manufacturer that says "We sincerely apologize for everything that makes you feel inconvenient." Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Fine Molds Kugisho D4Y1 / D4Y2 Judy, 1/48, FB1E

Plastic Model Kit,   Box Condition: VG+

Sold   

Dated 1999; well detailed an molded with all fine recessed panel lines, complete cockpit and crew stations, detailed gear wells and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Classic Airframes Curtiss Hawk III - Chinese Air Force Shanghai 1937 / Royal Thai Air Force 1940-41, 1/48, 434

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare. Highly detailed with main injection molded parts and many resin details. Includes a full color paint guide and decals for both aircraft listed. Never started. Factory sealed bags with decals and instructions present.

Classic Airframes North American P-51H Mustang, 1/48, 426

Plastic Model Kit,   Box Condition: Good-

Sold   

Highly detailed plastic kit with many photoetched brass and resin detail parts. Never started. The parts are still in the internal factory sealed bags and includes decals, color painting guide and instructions. The decals have age foxing with 99% of it on the backing paper and not on the actual transfers.

AMT Peterbilt Cabover Pacemaker 352 Tractor Semi Truck, 1/25, T502

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. This is an original issue with the finest mold quality; not a modern reissue. This super detailed truck has over 250 pieces and over 100 of those are chrome. Features a rolling chassis build-up just like the real truck, tilting sleeper cab, dual exhaust, fifth wheel assembly, hollow vinyl truck tires, fully detailed cab with air ride driver's seat, sleeper compartment and much more.

AMT Peterbilt 359 Semi Truck, 1/25, 6657

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Very highly detailed kit with 250 parts. Features a full rolling chassis build-up just like the actual truck, complete engine and engine compartment, detailed cab with complete interior, opening hood, full suspension and underside details and more

Top Flite Arrow Jet JIGTIME - 15 Flying Balsa Aircraft Rubber Or Jetex Powered, B4

Wood Model Kit,   Box Condition: VG

Sold   

Many companies tried to produce fully prefabricated flying model kits that would really fly. Of all these attempts, only Top Flite succeeded with the late 1950s 'JIGTIME' flying rubber free-flight model series. The Jigtime series were highly prefabricated 3D (not profile), all balsa models with no tissue. The tissue, rib and spar method was eliminated and it is built off of central jigs with all parts factory pre-painted with a colorful design. Includes 3D fuselage with die-cut sides, top & bottom all finished in color with insignia, panel lines and even rivets, completely finished wings with the correct dihedral and camber, finished tail feathers, clear plastic canopy, hardware, fully carved nose (that is also the thrust button), fully formed wire landing gear struts, finished wheels, plastic propeller, rubber motor and full instructions. Can be flown rubber free flight or Jetex free flight. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Sterling Real Sporty - 21 Inch Wingspan Flying Aircraft, Peanut, K-6

Wood Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. This is a well engineered, highly prefabricated model featuring all die-cut quality balsa parts, a large number of completely formed parts including fuselage sides, top & bottom, wing sheet covers, tail feathers, etc, finished wheels, plastic cowl & propeller, rubber motor, hardware set, vacuformed clear canopy, colored tissue, color decals, full size plan and separate teaching instructions sheet.

Dumas Curtiss SBC-3 Helldiver - 30 Inch Wingspan For R/C or Free Flight, 305

Wood Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Very large scale wooden kit with 30 inch wingspan. Perfect for rubber power, free flight or conversion to radio control. Features over 130 laser cut parts of hand-selected balsa, contest rubber and plastic propeller, vacuformed details, color decals, full size plan, hardware, lightweight issue and full step by step instructions.

Accurate Miniatures TBF-1C Avenger - Truk Lagoon Raid Feb 16 1944 USS Enterprise (CV6), 1/48, 3405

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

Still factory sealed. Very highly detailed and widely considered the finest 1/48 scale Avenger model. Features over 100 parts of excellent mold quality. Includes very highly detailed crew stations, excellent rear turret, full engine, separately molded rudder, detailed bomb bay with weapons load and optional position bomb bay doors, bomb cart, load-out, optional position pilots canopy and rear crew entry door and decals and paint guide for the listed aircraft.

Guillows Messerschmitt Bf-109 - 24 Inch Wingspan For Free Flight or R/C, 1/16, 401

Wood Model Kit,   Box Condition: Sealed Exc++

Sold   

SALE!! Still factory sealed. From the 1960s. Large scale, well detailed model that can be flown rubber free flight, gas free flight or converted to electric RC using modern small and light equipment. Well detailed with scale plastic wheels, plastic propeller, vacuform engine cowl and spinner, full color decals, colored tissue, die cut balsa parts, rubber motor, plywood firewall and excellent full size plans. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.

Trumpeter American LaFrance Eagle Fire Pumper, 1/25, 02506

Plastic Model Kit,   Box Condition: Exc

Sold   

A superb model featuring 326 pieces, a big fret of many PE details, rolling chassis build up just like the actual truck, full engine, complete front and rear suspension, driveline, exhaust, fuel tank, complete interior and more. Molded in white, clear, chrome plate and with rubber tires. Includes a large decal sheet for the box top truck and also enough letters and numbers to create almost any markings you can imagine. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Nitto M4-18T US Army 18 Ton High Speed Cargo Tractor, 1/35, 91

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal has splits. Very nicely detailed and features 7 soldiers, swiveling and elevating machine gun, rotating bogies, flexible tracks and more.

Trumpeter RA-5C Vigilante - With Many Aftermarket Detail Sets, 1/48, 02809

Plastic Model Kit,   Box Condition: VG+

Sold   

Includes the following factory-sealed aftermarket sets: Cutting Edge CEC48486 RA-5C Vigilante Correction Set, Aires 4258 RA-5C Exhaust Nozzles, QuickBoost 48-553 RA-5C Ejection Seats With Safety Belts, Master AM-48-080 RA-5C Brass Pitot Tube and ADA Probe, Master AM-48-033 NATO Standard Refueling Probe and SuperScale International 48-1004 RA-5C RVAH-7 Decal Set. The actual kit is a beautifully molded, large scale RA-5C with 237 parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Vac Wings Thomas-Morse S4C Scout Tommy - Bagged, 1/48, VW489

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed and the only 1/48 S4C kit ever made. High quality vacuform kit with injection molded struts, clear, decals and full plans/instructions. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

AMT Chevrolet C1500 Silverado Pickup Truck, 1/25, 6276

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. From 1988. Well molded and detailed ,model with over 130 parts can build one of three versions - stock, street or custom. Features detailed 359 CID engine and engine compartment, opening hood, complete interior with optional accessory gauges and CB radio with microphone, stock or custom front and rear tires and rims, molded chassis underside with separately molded fuel tank, drive shaft, front suspension, spare tire, rear differential and suspension and exhaust, separately molded tail gate, optional bug deflector, roof spoiler and tail gate spoiler and decals. Molded in colored plastic (usually white), clear, red-tinted clear, chrome plate and rubber tires.

Cavacraft Cessna 140 - Solid Wood Aircraft Model, S-7

Wood Model Kit,   Box Condition: Fair

Sold   

Rare. This excellent kit is among Cavacraft's final efforts to compete in the solid model hobby. The fuselage and wing are completely carved to shape. The quality is excellent - as good or better than Strombecker. Never started. The small parts are still in the factory sealed envelope. The larger parts were never sealed and have been inventoried complete. With plans/instructions.