Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Monogram Midget Racer - The First Monogram Plastic Kit, 1/24, P1

Plastic Model Kit,   Box Condition: Good++

Sold   

Although this is the first Monogram plastic kit, it is the second issue of this kit from later in 1954 (read below). In the late 1940s/early 1950s, Monogram began to use injection molded details in the famous Speedee-Bilt and SuperKit aircraft models. The parts chosen for injection molding were generally difficult to carve from wood. From this experience, Monogram was ready to embark on all-plastic models. The first effort was kit number P-1 (for plastic kit #1) in 1954, the 1/24 scale Midget Racer. The box is the correct hardbox dated 1954. The advertising on the outside is unique and is used to promote this new type of model and the ease of assembly. The kit and sub-assemblies are pictured and named on the sides. This box has excellent color and gloss, solid side corners, no price tags or tape but suffers average general wear including creases, heavy corner wear at the left and right top, and general soiling as shown. The box bottom is intact with four solid original corners, but one long seam has split. Inside, the kit is molded in the correct red plastic. The parts are still slightly flexible and have much less than the typical warping - so this was an unusually stable batch of acetate that was correctly molded. The instructions are correctly labeled P-1 and are near mint. As mentioned before, this is a second issue because the kit has decals and the modified instructions showing the decals. (The first issue has no decals and the instructions do not show them. Kit P-2 is the same way). The decals are also labeled P-1 and are in 'excellent' condition with the usual yellowing and a slight curve. The correct die-cut windshield is included as well as a Monogram mini-catalog correctly showing the only 8 all-plastic kits available at that date, all all with 'P' kit numbers (no 'PC' or 'PA'). The kit has never been started and is inventoried 100% complete. A great piece for the advanced collector.

Monogram Dornier Do-17Z Flying Pencil - White Box Issue, 1/72, 5305

Plastic Model Kit,   Box Condition: Good-

Sold   

Dated 1978. Very nicely molded and detailed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Emhar Yakovlev Yak-3, 1/72, EM2003

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed.

Matchbox Focke-Wulf FW-190 - 111th Group JG 51 Russia or SG1 Crimea 1943, 1/72, PK-6

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. From 1983. Includes decals for the aircraft involved in the first FW-190 sortie, which resulted in 7 PE-2s being destroyed. Optional parts and decals are also included to make a fighter bomber from SG.1 in Crimea, Russia in 1943.

Matchbox Grumman F6F Hellcat - VF-1/CV-10 USS Yorktown 1944 or FAA HMS Indomitable 1945, 1/72, PK-18

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. From 1983. Has decals for US Navy and Royal Navy aircraft as described in the title.

Eduard Fokker D-VIII Flying Razor - (DVIII), 1/72, 7003

Plastic Model Kit,   Box Condition: Good

Sold   

Very nicely molded kit with a large photoetched fret, lozenge decals and markings for 2 aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Frog Gloster Meteor F.Mk.IV - RAF No. 263 Sq or Royal Netherlands No.323 Sq, 1/72, F200

Plastic Model Kit,   Box Condition: VG+

Sold   

Includes parts and decals to make either version/aircraft. Excellent full color painting guide is located on the bottom of the box. Typical high quality Frog kit with fine panel lines and no rivet detail so it builds up to a realistic model. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Meikraft Models Hansa Brandenburg W-29 - (W29) Bagged, 1/72

Plastic Model Kit,   Box Condition: VG+

Sold   

Limited run kit. Includes extensive decals and clear canopies. Still factory bag sealed.

Airfix Hawker Typhoon Craftmaster Issue, 1/72, 10-39

Plastic Model Kit,   Box Condition: Good

Sold   

Very colorful and interesting 1960s artwork issue. The kit has never been started. Inventoried 100% complete including decals and instructions.

Hobby Craft De Havilland DHC-3 / U-1A Otter - Skis or Wheels - US Army Ban Me Thuot South Vietnam 1968 or RCAF 411 Sq Downsview 1980, 1/48, HC1656

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Large scale Otter that is very nicely molded kit with all recessed panel line details. Features detailed cockpit, separately molded crew entry and cargo doors, clear windows for the cockpit and sides, regular landing gear or skis and decals for two aircraft.

Comet Lockheed P-38 Lightning - 34 inch Wingspan Flying Model, 3504-300

Wood Model Kit,   Box Condition: Good+

Sold   

1970s stick and tissue flying model. Big 34 inch wingspan. Easily adapted to RC electric power with todays light weight receivers and servos. Features high quality printwood, pre-cut strip wood in multiple sizes, nose and nacelle blocks, dowels, completely formed and painted wooden wheels, rubber motors, hardware, balsa propellers, other wooden stock as needed, insignia and full size plans. Never started and complete with all parts and plans. The box has damage to the left side as shown.

Sterling Taylorcraft and PT-17 Stearman - Peanut Scale Flying Model Airplanes, Peanut, P5

Wood Model Kit,   Box Condition: Exc

Sold   

Kit contains both aircraft. Parts are printed on high quality balsa wood. Includes strip wood, colored tissue, decals, wheels, propellers, fittings, rubber, lightweight plastic parts, step by step instructions and full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.

Tamiya Nashorn 8.8cm Pak43/1 Geshtzwagen II/IV - Sk.Kfz.164, 1/35, MM335

Plastic Model Kit,   Box Condition: Exc+

Sold   

Very high quality armor kit that is detailed inside and out and includes a color painting guide and four figures. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell USS Flasher SS249 Submarine, 1/220, H431

Plastic Model Kit,   Box Condition: Good-

Sold   

1971 issue with fantastic box artwork. Well detailed kit is 21 inches long when assembled. Features torpedo tube detail, moving diving planes, detailed props, shafts and rudders, swiveling deck gun, detailed conning tower and periscope and display stand. The kit has never been started. Inventoried 100% complete including decals and instructions. The box looks OK but is not collectible - there are closed tears and clear tape on the corners and sides. The Flasher survived 6 tours in the Pacific and sand 21 ships for a total of 100,231 tons. Her crew earned the Presidential Unit Citation and Six Battle Stars.

Testors B-66B Destroyer - (A-3A), 1/72, 677

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Hard-to-find 1/72 version of the gun tailed B-66. This is the USAF version of the very large Navy Skywarrior A-3 or 'Whale' as the carrier crews and flight crews called it due to its large size. Features all recessed panel lines, detailed gear wells, cockpit detail and optional position landing gear. Contains a large, colorful decal sheet for two USAF aircraft - RB-66B 42nd TRW-England 1960 and RB-66B 19th TRW-England 1958. This is the early B-66 which is not that far removed externally from the original Navy A-3 Bomber. This B-66 still retains the tail stinger.

Testors E-2C Hawkeye - VAW-124 USS Nimitz, 1/72, 363

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. A very nice kit from quality Fujimi molds. Features over 75 parts, one piece wing, rotating props and search radome, optional position landing gear and more.

Testors Grumman F-14A Tomcat Black Bunny - US Navy VX-4 or VF-21 - (ex-Fujimi), 1/48, 328

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. From high quality Fujimi molds and with over 130 parts. Very nicely detailed with very fine recessed and raised panel lines. Features detailed cockpit and gear wells, optional position canopy, wings that swing, optional loadouts of (6) AIM-54 Phoenix, (4) AIM-9 Sidewinder, (4) AIM-7 Sparrow, drop tanks and more. Has decals for both aircraft listed.

Testors RF-4C / RF-4E Phantom II - USAF 67th TRW Bergstrom AFB or Nevada Air National Guard, 1/72, 682

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. From 1989. Very nicely molded kit with very fine raised panel lines, optional parts for C and E variants, very good cockpit detail, recon nose with clear camera panels, optional position canopies, optional position landing gear, drop tanks and paint guide and decals for the two aircraft listed.

Monogram De Havilland Mosquito - NFII-MkIVB-VI-II Night Intruder Four Star Issue, 1/48, PA129-200

Plastic Model Kit,   Box Condition: Exc++

Sold   

First issue dated 1965 and in excellent condition. Contains parts and decals to build any one of four versions: NF II Night Fighter, Mk IB Bomber, Mk VI Fighter Bomber and MkII Night Intruder. Very finely molded and detailed kit with traditional high Monogram quality. The kit has never been started. Inventoried 100% complete including decals and instructions.

RCM Martin JRM-1 Mars, 1/72

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.