MPC Junkers Ju-87B Stuka Profile Series - 2/Trop. 4/St.G2 'Immelmann' Libya 1941 - Gruppe Stuka Geschwader Z 'Immelmann' Eastern Front - 2/Trop. 1/St G1 Libya 1941, 1/72, 2-1107-100
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed. 1970s issue of the popular 'Profile Series'. Very cleanly molded kit with decals for all three aircraft listed. Airfix molded these kits in England, sealed them in bags and shipped them to MPC. MPC added the decals, instructions and box and marketed them through numerous outlets in the USA including hobby shops, grocery stores, dime stores and department stores. This arrangement with Airfix was older than the Profile Series, dating back to when the very colorful Airfix 'Craftmaster' kits were marketed in the USA.
MPC Hawker Hurricane Mk.I Profile Series - RAF No. 85 Squadron Church Fenton 1940 / No. 174 Squadron 1941 / No. 17 Squadron Debden 1940, 1/72, 2-1111-100
Plastic Model Kit, Box Condition: Exc+
Sold
The MPC Profile Series was a very popular model line in the 1970s. Using quality Airfix molds, MPC hit upon an excellent marketing plan. The kit includes one aircraft but markings for all three. The kit has never been started. Inventoried 100% complete including decals and instructions.
Scale Flight Comet's Aeronca Seaplane PC-3 - 16 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Scale Flight Comet's Aeronca Low Wing - 16 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Union 1946 / 1947 / 1948 Ford Convertible, 1/25, MC09-1500
Plastic Model Kit, Box Condition: Good+
Sold
Very well detailed kit with optional parts to build a 1946, 47 or 48 vehicle. Builds up an accurate rolling chassis like the real car with detailed engine, drive line, front and rear suspension and exhaust. Has complete interior, opening doors and hood and front seats that fold forward. Top can be displayed up or down with boot. Molded in white and clear with chrome plated parts and rubber tires. The model as never been started. Inventoried 100% complete with all parts, decals and instructions.
Airfix Auster 6 Antarctic - T3 Issue Bagged, 1/72, 103
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. 1960s issue type three logo bagged kit with header. The Auster 6 Antarctic was a specially modified aircraft supplied to the Antarctic expedition. It has additional fuel capacity and more elaborate radio and DF equipment. The Auster was first introduced during WWII as an artillery observation and liaison aircraft. Since that time it was progressively developed for both military and civil use. The ability for short field operation and use with wheels, skis or floats made it very popular at the time.
Hasegawa F-4E Phantom II IDF - Israeli Air Force 201st Sq '718' / 119th Sq '606', 1/72, 00297
Plastic Model Kit, Box Condition: Good
Sold
Very highly detailed kit from newer tooling. Features all very fine recessed panel lines, very well detailed cockpit and ejection seats, optional position canopies, detailed gear wells, centerline and wing drop tanks, decals and paint guide for the two aircraft listed and more. The kit has never been started. Internal factory sealed bag including decals and instructions. Box has light damage to the top, but the kit inside is mint.
Hasegawa Mitsubishi F1M2 (Pete), 1/75, F-3
Plastic Model Kit, Box Condition: VG
Sold
Very early Hasegawa rectangular logo - possibly the first issue. The box is in very good condition and has the high-gloss box top. This kit has never been started. It is either still in the internally sealed factory bag or has been inventoried 100% complete with all parts, decals, glue and instructions.
Lindberg British Battleship Hood - Motorized, 1/400, 763M-500
Plastic Model Kit, Box Condition: Exc+
Sold
Rare motorized 1st issue. Could easily be made RC with today's small FM components. Excellent condition box with wonderful gloss and color and four solid corners. This is a large and wonderful motorized kit that sails well. One electric motor drives the ship on a course that you pre-set - figure 8, straight or circle. While sailing at a good rate of speed, the four main turrets slowly swing from port to starboard together and the guns elevate. I remember sailing mine for years before the batteries died in the middle of the lake. Never started. Inside, the kit is as new. The parts are still factory wrapped, complete and in mint condition. Includes flag sheet, electric motor, running hardware and instructions.
Aurora CV-6 USS Enterprise - Aircraft Carrier From World War II, 1/600, 714-149
Plastic Model Kit, Box Condition: VG+
Sold
The first Aurora release dated 1959 with the 'Famous Fighters' in the sunburst logo. One of the few injection molded kits of the historical CV-6 - The US Navy's Most Decorated Ship. Full hull kit with pre-war 'EN' flight deck markings, display stand and aircraft. This kit has never been started. Inventoried 100% complete with all parts, decals, flag sheet and instructions.
Lindberg USS Biloxi CL80 (Cleveland Class) - Cellovision Issue, 1/1070, 736-29
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed and in exceptional condition. From the late 1950s or very early 1960s. Well molded, full hull small-scale kit with excellent box art by Ray Gaedke and a trading card on the back.
Sterling The Polish Fighter (P-11) - 36 inch Wingspan Control Line Aircraft, C-5
Wood and Metal Model Kit, Box Condition: VG+
Sold
Very rare and highly pre-fabricated kit, most likely from the very late 1930s or early 1940s. Large 'Control Line' replica of this classic Polish 1930s fighter that saw action during WWII. This model came from the estate of a very active and particular early collector. For the time, this was a very deluxe kit. Features custom aluminum spinner, individually carved gull wing leading edges, die cut ribs, bulkheads, tail surfaces and more, carved lower fuselage, celluloid for windscreen, shaped trailing edges, die cut balsa covering, full decals, die cut plywood parts, formed wire landing gear, complete hardware kit, silkspan covering material and easy to read step-by-step instructions. It is like factory-new inside and has not been started. Complete with all parts, plans and decals. This kit must be shipped insured.
Academy Mig-21MF 'Fishbed J' + Eduard PE and Mask + Aires Seats - Hungary / India / USSR, 1/48, 2171
Plastic Model Kit, Box Condition: NM
Sold
Model also includes Eduard #EX174 Mastk Set, #FE251 PE Color Interior Detail Set as well as the Aires #4051 (2) KM-1 Soviet Ejection Seats in resin and PE. All three items are still factory sealed. The model itself is very finely molded and detailed. Features all fine recessed panel lines, good cockpit detail, two piece canopy, separately molded wing flaps and ailerons, detailed gear wells and more. The kit has never been started. Internal factory sealed bag including decals and instructions.
MPC 1904 Darracq Early Automobile, 1/32, 2-1020
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed. Nicely molded kit of this successful early gasoline powered automobile.
Hasegawa F-4B/N Phantom II, 1/48, P5
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed. Limited production issue. The Hasegawa 1/48 Phantom series are considered the finest F-4 kits every produced in this scale. All very fine recessed panel lines and superior detail.
Monogram Hawker Hurricane 'White Box' Issue, 1/48, 6802
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. 1973 White Box issue of the original 'Four Star' kit. One of two known box art variants of the 'White Box' issue. Has all parts and decals to build any of five versions. Has all parts and decals to build any of five versions. Features a wide variety of guns/bombs/rockets and cannon, retracting landing gear and rotating prop and wheels.
Pyro Design-A-Plane - Makes 4104 Different Jets, 360-398
Plastic Model Kit, Box Condition: Good-
Sold
SALE! Classic late 1950/early 1960 kit by Pyro Plastics of Union, NJ. The kit consists of a 'Design-A-Matic' Slide Computer ('Validated by Remington Rand Univac Division'), a series of aircraft fuselage, nose and tail cone sections as well as canopies, different styles of wings, rudders and elevators (all very roughly 1/48 scale), two stands, landing gear and reusable insignia stickers (CCCP, USA, RAF and France) and full instructions. With the instructions and computer you can build one of over 4000 variations of jet fighter designs. The parts are snap together so they can be used again and again. The kit has not been started. NOTE: missing (1) set of landing gear; the other one is present. Includes all other parts, computer, instructions and sticker sheet. A few of the stickers have been taken off and neatly put back on the sheet - none are missing. This issue did not have the interior 'presentation' cardboard. NOTE: the (2) swept wings have one of two alignment pins missing. The Design-A-Plane kit was one of a series of design kits, including the Design-A-Car, Design-A-House and the Design-A-House Master Set.
ICM BM-21 Grad MLRS Multiple Launch Rocket System, 1/72, 72714
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Well detailed with 127 parts.
Revell Messerschmitt Me-262A-1a - (Me262), 1/72, H624-60
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. 1963 one-piece box with frameable artwork.
Monogram F-16XL Delta Wing, 1/72, 5206
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. From 1983. Unique advanced aerodynamic test bed F-16. Traditional high-quality Monogram kit that is very finely molded and detailed for that time.