Hasegawa Grumman F6F-3/5 Hellcat - (F6F5 F6F3)) VF-27 USS Princeton CVL-23, 1/72, 1165
Plastic Model Kit, Box Condition: Good
Sold
Very finely molded kit with very good detail and fine raised panel lines. Box has sun fading as shown. Never started. Inventoried 100% complete with all parts, excellent condition decals and instructions.
AMT 1964 1/2 Ford Mustang Hardtop, 1/16, 4804
Plastic Model Kit, Box Condition: Sealed Good++
Sold
Still factory sealed and an older issue from the 1970s. Large scale and with over 150 parts. Features opening and closing doors, opening hood, front seat backs that tilt forward, stock or custom engine with dual quads and chromed valve covers, spark plug and distributor wiring, tubing for water hoses, rotating wheels, black or whitewall tires, stock wheels or custom mag wheels, custom or stock steering wheel, normal exhaust or headers, stock or custom tail light bezels and decals for custom paint.
AMT 1957 Ford Thunderbird - Stock or Custom, 1/16, 4801
Plastic Model Kit, Box Condition: Sealed VG+
Sold
Still factory sealed. Original issue of this large-scale T-Bird. Features detachable hard top, 312CID Thunderbird Special engine with flexible ignition wires and hoses, detailed engine compartment, opening hood, complete interior, opening doors, underside drive, suspension and exhaust detail, many optional parts for the custom version and decals for stock or custom pin stripes. Molded in white, chrome, clear, red tinted clear and with rubber tires and metal axles.
Minicraft 1912 Ford Model T - (ex-Union / Entex), 1/16, 1508
Plastic Model Kit, Box Condition: VG+
Sold
Large-scale model with very good detail from ex-Union molds. The kit has over 125 parts and has working steering, opening doors, real rubber tires and full interior with 'outside' seat. Molded in dark green, black, clear and brass plated with rubber tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. The Ford Model T was perhaps the most popular antique automobile in the United States. Over 15,000,000 'T' cars were built. It was the first truly mass-produced car in the world, and one of the few cars known around the world by many generations.
Monogram B-52 Stratofortress Big Bad and Beautiful, 1/72, 5709
Plastic Model Kit, Box Condition: VG
Sold
1989 release of the classic B-52D BUFF kit. Very nicely detailed. Features crew of three, detailed cockpit, elevating and traversing rear turret, opening and closing bomb bay doors, operating wing flaps, operating spoilers, optional position entry hatch and landing gear, and optional parts to display one nacelle open to show the jet engine. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Eduard Sopwith F.1 Camel RFC with Mask Set and Photoetch, 1/48, 8057
Plastic Model Kit, Box Condition: VG
Sold
High quality kit. Features photo etched parts, express mask set, excellent injection molded parts with very fine detail and decals for three aircraft. This kit has never been started. All parts are still in the factory sealed bags. Complete with decals and instructions.
Model Hobbies 1950s Style Small Used Car Lot - Wood Office and Signs - HO Scale, HO, 537
Wood Model Kit, Box Condition: VG+
Sold
High quality building kit from the 'Golden Age' of HO 'Craftsman' kits. Includes a small wooden office with windows and doors as well as wood and printed cardstock to make a very large sign that would run the length of the lot along the street, as well as back into the lot. Features scribed wooden sides with precut windows, clear windows with preprinted details, door and other details, wood stock as needed, and a large sheet of cardstock signs with red printing and full instructions and plans. The kit has never been started. Inventoried 100% complete including instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.
Monogram Consolidated PBY-5A Catalina Dumbo the Great - Blue Box Issue, 1/104, PA197-130
Plastic Model Kit, Box Condition: Good
Sold
1967 release and the first Blue Box issue for the PBY. For some reason, the Blue Box turns up less than the earlier and later issues. From the original 1955 Four Star molds and oddly enough features the rare early black rubber tires. Molded in deep gloss blue and clear, with rubber tires and classic "Cool Cat" decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Otaki F-101A Voodoo / F-8C Crusader / F-4B Phantom / F-100D Supersabre, 1/144
Plastic Model Kit, Box Condition: Good to Sealed NM
Sold
Includes all four detailed, small scale kits. The F-101A is still factory sealed. The other three kits are open but have not been started. They are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.
AMT AC-130H Spectre Gun Ship Hercules - Bagged, 1/72, 8690
Plastic Model Kit, Box Condition: No Box
Sold
Bagged kit - there is no box. The box is shown for reference only. Well molded with all recessed details. Highly detailed with (2) M61A Vulcan 20mm rotary cannons, (1) 40mm Bofors Cannon and (1) 105mm Howitzer, complete cockpit and full interior, ecm pods, engine infrared shields, Suu-4A pods, ALQ-87 pods and full decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Italeri Lockheed C-130H Hercules - USA / Great Britain (RAF) / Italy / France / Canada (RCAF), 1/72, 015
Plastic Model Kit, Box Condition: VG
Sold
Very finely molded and detailed. Features complete and detailed cockpit, full cargo section, operating cargo doors and rotating wheels and propellers. Includes decals for all five countries listed. The kit has never been started. Inventoried 100% complete including decals and instructions.
Revell Mitsubishi Zero / Grumman F4F Wildcat Fighting Deuces Series, 1/72, H220-100
Plastic Model Kit, Box Condition: Exc
Sold
Dated 1969 and contains both model kits. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Hasegawa Vought F4U Corsair - VF-84 USS Bunker Hill Feb 1945 / VBF-10 USS Intrepid April 1945 Okinawa, 1/72, C13
Plastic Model Kit, Box Condition: Exc++
Sold
Very finely molded kit with decals for both aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Frog Supermarine Spitfire Mk14 and V-1 Flying Bomb - (RAF or SEAC Kai Tak) - Red Series, 1/72, F194
Plastic Model Kit, Box Condition: VG
Sold
Well molded kit like most all Frog models. Includes V-1, Spitfire and special stand that holds both models 'in flight.' Spitfire has optional markings for 'Punjab' Sq RAF Dienst Belgium 1945 or No.132 Sq RAF SEAC Kai Tak Hong Kong 1945. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hangar, ambulance, sound locater, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.
Hasegawa North American P-51D Mustang, 1/72, 1101
Plastic Model Kit, Box Condition: Exc++
Sold
Kit dates to the 1970s/early '80s. From high quality but older molds. Features very fine raised panel lines, good cockpit with opened or closed canopy, detailed gear wells and optional position landing gear and two wing drop tanks. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
MPC 1930 Bentley 4 1/2 Liter Supercharged - ex-Airfix, 1/12, 2-3051
Plastic Model Kit, Box Condition: Good+
Sold
Very large scale kit from the original Airfix molds. The box side says "Completely detailed from the ground up. Everything is perfect, from the chassis down to the engraving on the inside of the brake drum." Includes over 275 pieces and is easily the most detailed Bentley plastic model ever made. Features rolling chassis construction just like the actual car, super-detailed engine and compartment, opening bonnet, steerable wheels, full interior and much, much more. Molded in British Racing Green, black, chrome plate, clear and with rubber tires. Never started. All the parts that were factory sealed are still in factory sealed bags. The chrome, clear and one small black tree were never factory sealed; all three have been inventoried complete. With decals and instructions.
Contrail Blackburn Perth Flying Boat, 1/72
Vacuform Model Kit, Box Condition: Exc
Sold
Rare kit of the inter-war RAF flying boat. Nicely molded. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required.
Contrail Short Rangoon or Calcutta, 1/72
Plastic Model Kit, Box Condition: Exc+
Sold
Rare model of this classic 1930s flying boat. Deluxe vac kit with metal engines and props, extrusion molded wing struts and full decals. Fine surface detail is superior to many injection molded models. Never started and 100% complete. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required.
MPC 1976 Chevrolet Vega - Stock / Drag / Street Machine, 1/25, 1-7627
Plastic Model Kit, Box Condition: VG
Sold
Original issue from 1975. Can be built one of three ways. Drag and Street versions include many optional parts and even a 350 CID V-8 option. Features detailed complete engine, engine compartment, opening hood, full interior, rotating wheels, exhaust and underside detail. Molded in white, clear, red tinted clear, and chrome. With real rubber tires. The kit has never been started. The white parts that were factory sealed are still in the sealed bags. The clear and chrome parts were never factory sealed have been inventoried complete including decals and instructions.
MPC 1963 Chevrolet Corvette Stingray Split Window Coupe, 1/16, 1-3056
Plastic Model Kit, Box Condition: Fair
Sold
1977 issue. Nicely detailed, large-scale kit. Features detailed chassis, opening hood, detailed 327 V8 with Fuel Injection or Tri-Power carbs, working front suspension with metal springs, steerable front wheels, complete interior, optional factory side pipes, custom roll bar and optional decals. Molded in white, black, clear, red-tinted clear, chrome and with rubber tires. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals.