Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Grumman F6F-3 / 5 Hellcat - US Navy VF-17 / VF-15 / F.Mk.1 Royal Navy, 1/32, S15

Plastic Model Kit,   Box Condition: VG++

Sold   

Very nicely detailed kit with 139 parts. Features optional parts for -3 or -5 variants, complete engine, individual cowl flaps, full cockpit with optional position canopy, detailed wing gun bays with removable covers, moving wing flaps and rotating prop. Has decals for VF-17, VF-15 and Royal Navy No.800 Sq. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Burkard Brewster Bermuda / SB2A Buccaneer - Giant Solid Wood Aircraft, 1/32

Wood Model Kit,   Box Condition: Fair++

Sold   

Very Rare. From about 1943/44. Burkard kits almost never show up on the open market. They were exceptional solid wood display models for their time - highly prefabricated and very large scale. This one features a 17.25 inch wingspan (comes out very, very close to 1/32 scale), completely precarved fuselage (only needs final sanding), precut wings with airfoil, pre-cut stabilizers, fully formed main and tail wheels, other wood parts as required, metal stock as required, canopy material, blue and white US insignia sheet and full size plans with building instructions. Never started and inventoried complete with all parts.

Burkard Curtiss P-40 Warhawk - Giant Solid Wood Aircraft

Wood Model Kit,   Box Condition: Good-

Sold   

Very Rare. From about 1943/44. Burkard kits almost never show up on the open market. They were exceptional solid wood display models for their time - highly prefabricated and very large scale. This one features a 15.5 inch wingspan, completely precarved fuselage (only needs final sanding), precut wings with airfoil, pre-cut stabilizers, fully formed main and tail wheels, other wood parts as required, metal stock as required, canopy material with the frames printed on, blue and white US insignia sheet and full size plans with building instructions. Never started and inventoried complete with all parts.

Fujimi USS Iowa BB-61 Battleship, 1/700, WLB115

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1/700 scale waterline kit. Very highly detailed and finely molded.

Mach 2 Blohm und Voss Ha-139 - Luftwaffe Minesweeper, 1/72

Plastic Model Kit,   Box Condition: Good

Sold   

The Ha-139 was an attractive, all metal inverted gull wing floatplane. At one time it was the largest float-equipped aircraft in the world. Initially, this was a civil aircraft and between 1937 and 1939, Deutsche Luft Hansa flew them on trans-Atlantic routes, mainly between Bathurst, Gambia and Natal, Brazil. They were catapult-launched from a tender ship (such as the Friesenland) and were able to transport 500kg of mail up to 5,000 km. At the start of World War II, the Ha-139s were transferred to the Luftwaffe where they were used for transport, reconnaissance and minesweeping in the Baltic. While successful in the civil role, they were not well suited to military work. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Academy Lockheed Ventura PV-1 Gun Ship, 1/72, 1678

Plastic Model Kit,   Box Condition: Exc+

Sold   

Unusual gun ship issue for a very heavily armed Ventura. Accurate and nicely molded featuring very fine all recessed panel lines, detailed cockpit, rotating turret and optional position landing gear. Includes decals for the aircraft on the box artwork. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell White-Fruehauf Mobilgas Gas Truck - 'S' Issue, 1/48, H1402-169

Plastic Model Kit,   Box Condition: VG

Sold   

First issue dated 1956. Not the common reissue. Kit features detailed engine, movable cab, full chassis and interior, opening valve compartment doors, Champion sign and crew of two as shown on the cover artwork. The kit is mint inside. The small parts are still in a factory sealed bag. The parts that were never sealed have been inventoried complete and includes decals and and instructions.

Monogram Consolidated B-24D Liberator - Moby Dick 90th BG 5th AF, 1/48, 5604

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1983 issue. This is an excellent model that features full interior, landing gear, gear well and bomb bay detailing, rotating props, turrets, wheels, pivoting nose wheel, bomb load, optional waist gun covers, optional position bomb doors, boarding ladder, crew of four and more.

Lindberg Messerschmitt Me-410 Hornet, 1/72, 473-100

Plastic Model Kit,   Box Condition: Good

Sold   

1972 issue with excellent Tom Morgan art. Never started. Inventoried 100% complete with all parts, decals and instructions present.

Testors Indianapolis 500 Ford Lotus Racer, 1/25, 122

Plastic Model Kit,   Box Condition: Good

Sold   

Nicely detailed model from 1976. Features working steering, detailed suspension, 255 CID engine with fuel injection, complete interior, Firestone racing tires, chrome accessories and more. NOTE: this kit has very minor and 'professional' quality sub-assembly as follows: two rims and built and installed into two tires. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions. NOTE: one part, the sway bar, is broke; the parts are all present so it can be fixed.

Lindberg Air Force Tank Destroyer P-47 Thunderbolt Motorized, 1/48, 303M-129

Plastic Model Kit,   Box Condition: Sealed Exc+++

Sold   

Still factory sealed. First motorized release from the 1950s/early 60s in a hardbox and classic Ray Gaedke Art. Features motor driven prop, full landing gear, bombs and rocket load-out and extensive cowl checkerboard and invasion white-black stripe decals. Molded in green and clear (although I cannot confirm that). Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Aurora-KB Fokker E-V D-VIII - Collectors Series - Polish Air Force -(EV), 1/48, 1135-170

Plastic Model Kit,   Box Condition: Good-

Sold   

1972 issue with revised molds; a much better kit that previous issues. Includes pilot, ground crewman and battle terrain base. The kit has never been started. Inventoried 100% complete including decals and instructions. The aircraft represented fought with the Polish Air Force against the Ukranian forces in 1919 but by that point it was a D-VIII. The Fokker E.V was a fantastic performer and the result of a longtime Fokker development, the cantilever wing. In addition to greatly reducing drag, a properly built cantilever wing is very light and strong. This wing was first used on prototype V17 and then on V28 which took part in the Second Fight Competition (July 6-14 1918) where the most experienced German front line pilots chose new fighters for late war service. V28 was chosen for it's excellent flying properties and 200 of the production aircraft, known as the Fokker E.V, were ordered. Over 289 aircraft were delivery. The E.V began front line service on August 5, 1918; Lt. Emil Rolff of Jasta 6 reported an aerial victory on August 17. However, the day before, an E.V suffered catastrophic wing failure. Two days later, the same failure cost Lt. Rolff his life. All E.Vs were immediately grounded. A detailed investigation showed that there were fatal defects in the wing assembly caused by slack manufacturing processes. Although it was not his fault, Fokker took this opportunity to re-design and strengthen the wing. Existing E.V aircraft received new wings and newly built aircraft were designated D.VIII. Modified aircraft made it back to the front in November, too late for service. However, the aircraft saw active service after that war with the Freikorps air units, the Polish Air Force against Russia, the Dutch Air Force and an unspecified number went to France and the USA.

Roden Bristol F-2B Fighter - (F.2b) Andrew Edward McKeever, 1/48, RO425

Plastic Model Kit,   Box Condition: VG++

Sold   

From recent molds and very nicely detailed with a full engine and cockpit, optional parts for different variants and decals for 6 different colorful aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Roden Fokker DVII (Fokker Built Late) - Oblt Erick Loewenhardt (54 Victories) Jasta 10 August 1918 / Hermann Goering October 1918 / Oblt Bruno Loerzer (44 Victories) Jasta 26 Nov 1918, 1/48, RO417

Plastic Model Kit,   Box Condition: Exc+

Sold   

From recent molds and very nicely detailed with a full engine and cockpit and decals for lozenge camouflage and for all three of the colorful aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Lindberg North American F-86 Sabre Jet, 1/48, 505-98

Plastic Model Kit,   Box Condition: Good

Sold   

Late 1950s hardbox issue with fantastic Ray Gaedke artwork and the yellow rectangular 'Lindberg Line' logo on top and sides. Molded in silver and clear. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Trumpeter USS Ranger CV-4 Aircraft Carrier, 1/350, 05629

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Features over 950 pieces and is highly detailed inside and out.

Hasegawa Messerschmitt Me-163B Komet - (2) JG400 / (1) Training and Prototype, 1/32, JS-087

Plastic Model Kit,   Box Condition: VG

Sold   

Most likely from the early 1980s and well detailed for that time. Features full cockpit, landing skid or wheels, optional position tail wheel/strut and detailed Walter 509A Rocket Motor. Has markings for four aircraft - Me-163 B-1 2nd Staffel of JG400 Brandis, 1944, B-1a Training Staffel, B-1a 1st Staffel JG400 and the Prototype Me-163B-0 V41, the world's first operational rocket fighter 1944. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Lindberg Avro Vulcan Jet Bomber, 1/96, 579-200

Plastic Model Kit,   Box Condition: Exc-

Sold   

1967 hardbox issue with some of my favorite Tom Morgan box artwork. The box top has excellent color and gloss, four solid corners and light wear as shown. The model features movable ailerons, wing flaps, rudder, pilot and copilot figures and a large, clear round-base stand. Never started. Inventoried 100% complete with all parts, decals and instructions.

Airfix F4F Wildcat Craftmaster, 1/72, 3-46

Plastic Model Kit,   Box Condition: Exc

Sold   

Very colorful 1960s issue with great box artwork. 'Black' box issue with black side panels. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions.

Lindberg Grumman F6F-5 Hellcat - (F6F5), 1/72, 484-60

Plastic Model Kit,   Box Condition: Good++

Sold   

1967 hardbox issue with artwork by Lacina. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.