Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

ESCI Mig-29 Fulcrum With Pilots and Ground Crew - USSR / Yugoslavia, 1/72, 9095

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Unusual issue with the figures. Includes decals and paint guide for both air forces.

Hasegawa OV-10A Bronco Marines - 6th Obs Sq / 267th Light Helicopter Sq., 1/72, B11

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

1980s issue. Nicely molded older kit. Has markings for both Marine versions.

Yankee Modelworks IJN Kirishima Battleship, 1/350, YKM-35080

Resin Model Kit,   Box Condition: VG+

Sold   

Yankee Modelworks 1/350 were advertised as the World's Finest 1/350 Ship Kits, and that was no idle boast. All resin parts are cast from de-aired molds in a pressure chamber - ensuring that every detail is sharp and there is zero to few air bubbles. Careful design of the molds also nearly eliminated resin flash. The cast metal fine details are stunning and it can be built full hull or waterline. The Yankee IJN Kirishima is rightly considered by many to be superior to the injection molded version for many reasons. First, resin holds much finer and sharper detail than what is possible with injection molded. Second, small cast metal details are superior to injection molded plastic also. Third, this kit is already super-detailed with two large brass photoetched sheets. Add to this 18 pages of heavily illustrated instructions with decals you have a great kit. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell HRS-1 Marine Helicopter from the Airborne Marines Gift Set in a B-52 Pre-S Box, 1/48, H273

Plastic Model Kit,   Box Condition: Good

Sold   

Rare. NOTE: Please read carefully. Revell never issued H273 separately; this is part of a rare gift set. Includes correct "S" instructions marked H-273 and dated 1956 (in excellent condition), full decal sheet including "S" round stand decal (in very good++ condition) and helicopter parts molded in gloss dark blue and clear. The kit is unassembled but has light glue marks on the rotor tips, center shaft and 2 retainers. Missing (1) of (3) small #5 control links and the stand. Otherwise inventoried with all other parts present. This all comes with a Revell Pre-S 1954 B-52 box with wear as shown. (Revell did issue H181, the HRS-1 Helicopter later in 1960 but note that it has a different part number, different instructions and different decals).

Monogram A-4 Aggressor Skyhawk (Top Gun) - Bagged, 1/48, 5411

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - no box. The box is shown for reference only. From 1979. Navy Top Gun Aggressor issue. Dive brakes, canopy, wing flaps and leading edge slats can be positioned opened or closed. Full underwing stores include drop tanks, bombs and missiles. Typical high Monogram quality kit. It has never been started. Inventoried 100% complete including decals and instructions.

Hobby Craft Sopwith Camel F-1 With Toms PE Detail Set - RAF No. 43 Sq mid 1918 / No. 3 Sq A Flight RAF mid 1918 - (ex-Academy), 1/32, HC1685

Plastic Model Kit,   Box Condition: Exc+

Sold   

From quality Academy molds. Includes Tom's Modelworks #503 British WWI Interior Detail Set, still factory sealed. The actual kit is large-scale with good detail, clean moldings and a large decal sheet. Features very good cockpit and engine detail with full rigging diagrams. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

UPC B-29 Superfortress - (ex-Marusan), 1/101, 5067-100

Plastic Model Kit,   Box Condition: Good

Sold   

From about 1965 and issued from original Marusan molds. This is a nice, early model featuring moving control surfaces, rotating props and wheels, cockpit detail, crew, full landing gear and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: one prop blade is clearly broke at the hub. It is present and will need to be repaired. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.

Sanwa Ki-84 Shippu Hayate 'Frank', 1/101, 122

Plastic Model Kit,   Box Condition: Exc

Sold   

Rare, small-scale Sanwa issue from the early 1960s. The box is in 'excellent' condition with very nice color and gloss and complete with all ends and flaps. There is light damage at the upper right as shown. The airplane is molded in silver and clear and the 'V' stand is molded in blue. The kit has never been started. Inside it is in 'factory new' condition. The parts are still in the internal factory sealed bags and includes decals and instructions. The large stand base is the only part that was never factory sealed. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that move with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor.

Monogram Grumman F6F-5 Hellcat, 1/48, 5211

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. From original Four Star mold and dated 1990 with the parts molded in dark blue and clear, similar to the original. Features folding wings, retractable landing gear, pilot figure and rotating prop and wheels.

Revell Heinkel He-162 A-2 Salamander With Two Eduard PE Sets / Cutting Edge Decals / Aires Cockpit and Wheel Bay / Aries Wheel Set and Masks / Czech Masters Control Surfaces - 3./JG1 'Oesau' Oblt. Emil Demuth May 1945 / 2./JG1 May 1945 / 3.JG1 Lt. G. Stiemer May, 1/32, 04723

Plastic Model Kit,   Box Condition: Good

Sold   

Build the ultimate 1/32 People's Fighter! Includes the following aftermarket detail/upgrade sets with the condition in parenthesis- Cutting Edge CED32065 Decal Set (never used, mint, complete), Eduard 32-540 Exterior PE Set (never used, complete), Eduard 32-539 Interior PE Set (missing one fret but those parts are included in the Aires Resin Cockpit), Aires 2027 Resin and PE Complete Cockpit Set and wheel bay (complete, never used), Aires 2080 Resin Wheels Set With Masks (never used, complete), Czech Master 5010 Control Surfaces (never used, complete). The actual kit is very nicely detailed and from new molds. Features well detailed cockpit and gear wells, full engine with optional position engine cowls, optional position landing gear and cockpit canopy, decals for three aircraft and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Hasegawa Lockheed T-33A Shooting Star Thunderbirds, 1/72, 00171

Plastic Model Kit,   Box Condition: NM

Sold   

Nicely detailed older kit. Has extensive detail sheet for Thunderbirds. The kit has never been started. Internal factory sealed bag including decals and instructions.

Airfix McDonnell F2H-2P or F2H-2 Banshee - VMJ-1 or VF-172, 1/72, 9 04023

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Dated 1981 and an excellent kit for that time. Includes optional parts to make the -2 fighter or the -P reconnaissance variant. Includes decals for both aircraft listed.

CM AM56 USS Osprey (Raven Class Minesweeper), 1/350

Resin Model Kit,   Box Condition: Sealed Exc

Sold   

SPECIAL ORDER limited production kit. Museum quality high definition resin castings. Complete kit with all parts needed for assembly. Some kits include photo-etched details and decals if required -email for details on a certain kit. Kits are molded upon receipt of payment. Normal wait is 2 to 3 weeks.

Revell Flying Cloud Clipper Ship - 'S' Issue, 1/232, H344-298

Plastic Model Kit,   Box Condition: Good-

Sold   

Hardbox issue dated 1956. Builds to a beautiful model. Like most early Revell sailing ship models, the molds were cut by true craftsman. The kit is beautifully molded in black, white and tan and has excellent detail and mold quality. Includes pre-formed ratlines, vacuform billowing sails, decals, flag sheet and full or simplified rigging instructions. Never started. Inventoried 100% complete with all parts, decals and instructions.

AMT Donnie Allison Chevelle Stock Car - (Chevrolet Chevelle), 1/25, T380

Plastic Model Kit,   Box Condition: Good

Sold   

Original issue from the early 1970s. Car appears to be either a 1973 or 74 Chevelle 2 door coupe. Well detailed for that time. Features complete engine, detailed underside with separately molded driveline, rear axle, shocks and more, very nice full race interior, opening hood and more. Molded in white, clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (clear and chrome) have been inventoried present including instructions. NOTE: missing decals.

Testors Learjet 25 (Lear Jet), 1/48, 401

Plastic Model Kit,   Box Condition: Good

Sold   

The only injection molded kit of the Lear 25. When Testors acquired the IMC molds for the Lear 24, they extensively modified them to make the more recent Model 25. Features full interior and cockpit, opening engine cowls and detailed engines, removable hatch showing detailed avionics bay and more. The kit has never been started. The parts that were factory sealed (white plastic) are still in the sealed bags. The parts that were not factory sealed (chrome and clear) have been inventoried complete including decals and instructions.

Model Shipways Phantom - New York Pilot Boat - 13.5 Inch Long Wood and Metal HO Ship, HO, MS2027

Wood and Metal Model Kit,   Box Condition: Exc+

Sold   

Very highly detailed wood and metal kit in HO scale. Features machine carved hardwood hull that needs final sanding only, basswood and metal construction, true to scale wood, brass and Brittania metal fittings, plank-scored basswood decking, copper hull sheathing, hardwood launching way, hardwood display base, detailed instructions and plans and three sizes of rigging lines. The kit has never been started. The parts that were in internal bags are still factory sealed. The parts that were never sealed (hull, templates, instructions and plans only) have been inventoried complete.

Burkard Grumman TBF Avenger - Giant Solid Wood Aircraft

Wood Model Kit,   Box Condition: VG

Sold   

Very Rare. From about 1943/44. Burkard kits almost never show up on the open market. They were exceptional solid wood display models for their time - highly prefabricated and very large scale. This one features a 19 inch wingspan, completely precarved fuselage (only needs final sanding), precut wings with airfoil, pre-cut stabilizers, fully formed wheels, other wood parts as required, canopy material with the frames printed on in silver, two big full color insignia sheets, a corked glass bottle of glue and 'near mint' condition full size plans with building instructions. Never started and inventoried complete with all parts.

Con-Cor Airslide Covered Hopper Union Carbide - HO Craftsman Kit With Sprung Metal Trucks, 1/87, HO-201

Wood and Metal Model Kit,   Box Condition: Exc+

Sold   

From the late 1950s or very early 1960s. Excellent model that is well engineered. Features factory-built, real spring trucks, large metal castings, numerous , wood parts cut to shape, plastic car sides completely factory painted and lettered and with plastic and metal hardware. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including complete instructions.

MPC Mack DM 600 Semi Truck, 1/25, 1-0854

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Early issue - not a reissue. Very highly detailed kit with 275 parts. Builds a full rolling chassis just like the full-size truck. Features complete engine and engine compartment, detailed cab with complete interior, opening hood, full suspension and underside details and more.