Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.

Megow Rearwin Speedster - 30 Inch Wingspan Flying Aircraft, 1/13, J9

Wood Model Kit,   Box Condition: Poor


Rare wartime issue from about 1943 and an ideal builder. Large scale (1/12.8) flying model has stick and tissue construction. Includes the following: factory cut spars and stringers (still held together with the factory string), two sheets of thin hardwood printwood, other thin wood sheet stock and block stock as required, disc wheels, fully formed thrust button and wire prop/rubber hook, factory rough-cut wooden prop, covering tissue and full size plans. I have done an inventory and I would say the kit is complete with all parts. The plans show the motor hum device, but that did not come with wartimes issues because was made from strategic materials (metal). NOTE: there is no assembly but about 10 fuselage bulkheads are neatly cut out. They are all included. The box is rough and fragile. Plans are in very surprising 'very good++' condition.

Top Flite Luscombe JIGTIME Flying Balsa Aircraft, B6

Wood Model Kit,   Box Condition: VG++


Rare late 1950s kit in the famous Top Flight "JIGTIME" flying rubber free-flight model series. The Jigtime series were highly prefabricated 3D (not profile), all balsa models with no tissue. The tissue, rib and spar method was eliminated and it is built off of central jigs with all parts factory pre-painted with a colorful design to eliminate painting. Includes fuselage sides, top and bottom, completely finished wings with the correct dihedral and camber, finished tail feathers, fully formed wire landing gear struts, finished wheels, plastic prop, thrust button, washers, rubber motor and full instructions. It has not been started. Inventoried and NOTE: missing the flat clear material for the canopy. Otherwise complete with all other parts and instructions.

AMT 1955 Chevrolet Nomad Wagon - Stock / Custom / Drag, 1/25, T289

Plastic Model Kit,   Box Condition: Good+


Original "T" issue. Can be built any one of three ways. Includes extensive customizing and street parts. Features detailed engine and engine compartment, opening hood, detailed underside, complete interior and rubber tires. Never started. The parts that were factory sealed are still in factory sealed bags. The parts that were never factory sealed (chrome and clear) have been inventoried complete. With instructions and decals.

AMT 1957 Ford Thunderbird T-Bird Here Comes The Judge!, 1/25, T235-225

Plastic Model Kit,   Box Condition: VG+++


Rare original issue. Features detailed chassis, full engine and engine compartment, opening hood, complete interior and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Airfix Fokker F-27 F27 Troopship, 1/72, 05003-4

Plastic Model Kit,   Box Condition: Sealed VG++


Still factory sealed. Features full cockpit, working rudder, elevator and ailerons, optional position landing gear and moving props & wheels. Contains markings for camo and high visibility (silver/white/red) Dutch Air Force versions.

Testors 613 Nieuport 17 C-1 and 617 Spad XIII C.1 - (ex Hawk), 1/48

Plastic Model Kit,   Box Condition: Exc+


SALE!! Includes two kits. The Nieuport is still factory sealed. The Spad is open and never started. All parts are still in the factory sealed internal bag. These are from quality ex-Hawk molds.

AMT 1934 Ford Stake Pickup Truck - Stock or Custom, 1/25, T314-225

Plastic Model Kit,   Box Condition: VG


Early "T" issue with price suffix. Can be built stock or custom. Stock features Ford Flathead V-8 engine, detailed chassis and full interior. Rod features plated 390 Tbird engine with triple carbs and headers, bucket seats, tools, spotlights, air horns, engine display stand and more. Never started. The parts that were factory sealed are still in factory sealed bags. The parts that were never factory sealed (chrome and clear) have been inventoried complete. With instructions and decals.

Hasegawa North American F-86F Sabre - USAF 21st FBW Commanders Aircraft / 8th FBW Commanders Aircraft, 1/48, PT13

Plastic Model Kit,   Box Condition: Exc


Dated 2008. Superbly detailed with all fine recessed panel lines, detailed inlet and exhaust, very good cockpit detail and optional position canopy and speed brakes, detailed gear and speed brake wells and more. Includes an incredible, very large decal sheet that includes all colorful markings for the two aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Durango Press D&RG Ore Loading Ramp HOn3 Narrow Gauge - Craftsman Model, 1/87, DP-125

Wood Model Kit,   Box Condition: Good


Very highly detailed wooden kit with full instructions and plans. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Main Line Models 36' Wood Sheathed Refrigerator (Billboard Reefer) - Decker Meats- HO Craftsman Kit, 1/87

Wood and Metal Model Kit,   Box Condition: Good++


Very high quality wood and metal kit from the Golden Age of HO Craftsman kit. Builds a very accurate and highly detailed prototype of this Wooden Reefer. Kit features pre-cut and pre-scribed hardwood sides that are factory painted and decorated for Decker Meats, cut and pre-milled hardwood roof and floor, hardwood pre-cut and scribed car ends, wood and metal stock as required, metal ladders, reefer doors, ice hatches and brake wheel, metal grab irons, brake details and more. The model has never been started. The details and other parts are still factory sealed. The parts that are not sealed have been inventoried complete and includes full size plans/instructions. If you have an interest in these kits and the revolution they created in modeling, please read the article about their history located on this website. Please cut and paste this link in your browser to see it - http://www.oldmodelkits.com/blog/plastic-model-kit-history/the-ho-scale-model-railroading-revolution-of-the-1940s/

Wahl Cordless Filer / Sander Model 6750 Plus 7 Accessories / Anchor Nylon Ring Clamp / Micro-Mark Right Angle Grinder 3 Jaw Chuck #15254, 980620

,   Box Condition: Sealed NM


Wahl Cordless Filer/Sander Model 6750 is still factory sealed. It includes power unit, recharge stand and many accessory. Also includes the following additional factory sealed accessories: 6760, 6761, 6762, 6763, 6765, 6766, and 6767. Also includes a Nylon Ring Clamp (new, sealed inside) and a sealed Right Angle Grinder Chuck from Micro-Mark with instructions. These items are all from the late 1990s and are sold untested, as-is, since they are all sealed.

Revell 2000 Ford Limited Edition Harley-Davidson F150 Pickup Truck With Trailer and FXDX Dyna Super Glide Sport Motorcycle, 1/25, 85-7685

Plastic Model Kit,   Box Condition: Sealed VG+


Still factory sealed. From 2001. Includes the truck with all the special Harley Davidson LE parts, trailer and motorcycle. Well detailed with 118 parts. Truck features detailed engine and underside, removable hood, complete interior and more.

Revell Sopwith Camel - Flown By William Barker, 1/28, H291

Plastic Model Kit,   Box Condition: Sealed VG


Still factory sealed. Large scale (1/28) model dated 1969. Has full engine and cockpit detail and pilot and crew figures. 1969 reissue of the 1956-1959 'S' kit and includes special markings for Barker's Camel. William Barker's final combat mission was when he pitted his aircraft alone against 60 German aircraft. Barker was seriously injured, but destroyed 4 aircraft and damaged two others. He won the Victoria Cross for that engagement.

Czech Model Brewster F2A-3 Buffalo 339-23 - Australia RAAF No 25 Squadron / USAAF 5th Air Force / US Marines VMF-221 / US Navy Training Command, 1/32, 3201

Multimedia Model Kit,   Box Condition: Sealed NM


Still factory sealed. Wonderfully detailed 1/32 scale Buffalo. Features very nicely molded injection parts with fine recessed panel lines, numerous high-definition resin details, photoetched parts and decals for four aircraft. Includes a highly detailed cockpit and engine, optional position canopy, detailed gear wells and and much more.

Sterling AT-6 Texan With Operating Landing Gear In Flight - 18 inch Wingspan, A9-149

Wood Model Kit,   Box Condition: VG


18 inch wingspan kit for rubber free flight or control line. Includes innovative system for making the landing gear operate in flight. Stick and tissue model featuring quality die-cut balsa parts, stripwood and spars, other wood stock as required, clear vacuform canopy (still in mint condition and not even yellowed), vac plastic details including gear well, pilot, cowl/engine & canopy, air scoop, finished wire landing gear struts, finished main and tail wheels, rubber motor, plastic prop, covering tissue and a big full color decal sheet. Includes excellent full size plans with detailed instructions. Never started and inventoried complete. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling's offering to be 'deluxe' compared to other manufacturers.

Cal Aero-Model Bill Englehardts 1940 So Long Free Flight Old Timer 32.25 Inch Wingspan - (ex- FAI Model Supply)

Wood Model Kit,   Box Condition: VG++


Modern kit of this classic design. Features many sheets of die-cut balsa parts, die-cut plywood, stringers and spare, metal and wood stock as required, fully formed wheels, full size plans and text instructions. Never started. The small parts are still in the factory sealed bags. The parts that were never sealed are complete.

LS Mitsubishi Ki-46 II Type 100-2 Dinah, 1/72, 1

Plastic Model Kit,   Box Condition: VG+


Wonderful kit with legendary LS quality. Very highly detailed kit and very nicely molded. Features all fine recessed panel lines, detailed interior and more. This kit has never been started. It is still in the internally sealed factory bag and includes decals and instructions. Some of the LS molds are still used today by Hasegawa, testifying to their detail and accuracy.

Dremel Cordless Minimite Precision Rotary Tool

,   Box Condition: Sealed Mint


Still factory sealed. Includes tool batter pack, charger, five bits and full instructions. Sold as-is - not tested because it is factory sealed.

Monogram United States Earth Satellites Vanguard and Jupiter C with Launching Pad and Crew, 1/96, PD41-98

Plastic Model Kit,   Box Condition: Exc


Very rare. First and only issue from 1958 with box art by R. Price. Very nicely detailed and molded in silver, gray and white plastic. Features missiles, launching pad with railings, ladders and crew of four. Never started. Decals are in 'excellent++' condition with a tiny bit of yellowing as the only flaw. Instructions are 'excellent' with slight yellowing and light general wear. Inventoried complete with all parts, Monogram Missile Models insert sheet and small Monogram catalog. Shipping insurance is required on this kit. The box is graded 'excellent' and has four solid corners, no repairs, superb gloss and color, no price tags, no tape, no marks from tags or tape, no fading and no tears or missing litho. The only flaws are general light wear as shown. It is interesting to speculate on how this kit became one of the rarest 1950s Monogram kits. Although Monogram and Revell found that missile kits sold very well initially, the interest fell off rapidly. Even the molds for such a simple kit would have cost $20,000 to $30,000 in 1958 US Dollars - so obviously the kit did not sell well or it would have been continued. The main reason is probably that this kit is a very late Monogram missile, and was issued when interest was already waning. Whereas other missile kits (Missile Arsenal) were reworked and re-released, the Earth Satellites never were and are seen much less often than the Rascal and Regulus II.

KeilKraft Bf-109 EeZeBilit Flying Aircraft - (Me-109), KK0026

Wood Model Kit,   Box Condition: Sealed NM


Still factory sealed. Highly prefabricated and pre-decorated flying model with a 16.5 inch wingspan. Features all balsa construction (no tissue needed), quality die-cut balsa parts that are completely factory painted, plastic wheels and flying prop and thrust button, fully formed wire landing gear struts, full color insignia and very nicely illustrated building and flying instructions. KeilKraft was produced by the E. Keil & Company, Limited of Wickford, Essex Great Britain. Keil specialized in stick and tissue scale flying models and gliders. They made a few plastic kits as well.