Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Maintrack Hawker P.1083 (P1083) Supersonic Hunter - Conversion Kit - Bagged, 1/72, PXC-01

Vacuform Model Kit

Sold   

The rare "Thin Wing Hunter." High quality vac conversion features highly detailed moldings with fine recessed lines are of higher quality than many injection molded models, resin tail cone and full instructions with plans. As a conversion kit, it requires a base kit (not included) and the Airfix Hunter FGA9 is recommended. The kit has never been started. It has been inventoried complete with all parts and includes instructions. The P1083 was Hawker's effort to produce a true level flight supersonic jet; most aircraft of the time like the Swift, Mig-15 and F-86 went beyond the sound barrier only in a shallow dive. Work proceeded on the prototype in 1952. The wing design incorporated 50 degrees of leading edge sweepback and a mean thickness:chord ratio of 7.5% compared with the P.1067 Hunter's 45 degrees and 8.5%. The leading edge portion of the new wing, forward of the front spar, made provision for internal fuel bags, an innovation not fitted to early Hunters. The increased sweepback meant that, during a high speed pull-out, a very much greater loading was applied to the rear spar/undercarriage girder than on the standard machine. There was a great deal of hope that this would be the first supersonic fighter; but then the plug was pulled on the project and the prototype scrapped. However, the lessons learned were not wasted as they were used in later marks of the Hunter and aircraft after it.

Arcadia-Craft USS Cairo Federal Gunboat 1962 - (City Class), 1/192, 12

Wood and Metal Model Kit,   Box Condition: Good+

Sold   

Rare scale kit measuring just over 10 inches long. Scale is given as 1/4"-4', which I believe is 1/192. Excellent model with a factory cut hardwood hull and superstructure, metal fittings, other pre-cut hardwood and stock wood as required, full size plans and instructions. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. The USS Cairo has a fascinating history. She was built as one of the City Class Ironclad Gunboats and was among the first in the Federal Navy. She was commissioned on January 16, 1862 and was torpedoed and sunk on December 12, 1862. She was 7 miles south of Vicksburg at the time and was headed for a bombardment. The damaged was done by an electrically-fired torpedo. The Cairo sank in shallow water and was forgotten. But the silt did a remarkable preservation on her. Amazingly she was found and subsequently raised in 1964. You can see this ship at a park near the Vicksburg National Cemetery and there is an excellent museum as well.

Tamiya LVTP 7A1 US Marines, 1/35, 35136

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Highly detailed and well molded.

Lindberg Limited Edition Diamond Duster Motorized, 1/12, 73052

Plastic Model Kit,   Box Condition: VG++

Sold   

Numbered 91 of 3500 made. Very large (1/12 scale) kit of the futuristic show rod, made from the original early 1960s molds. Very nicely detailed and features working headlights, working steering, motorized drive (two 'D' batteries required), full engine with ignition wiring, rolling chassis like a real rod, working spring shocks, complete underside and suspension detail, full interior with seatbelts, opening hood and trunk and more. Molded in white, black, clear and with numerous large chrome plated trees and rubber-like tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Domus-Kits Burgen Castle Medieval Series HO Scale, 1/87, 40905

Multimedia Model Kit,   Box Condition: NM

Sold   

Retails for over $100. A fantastic kit and one of a huge line of similar models. Includes everything needed to make the display you see on the box top. Features hundreds of complete preshaped and precolored scale bricks, base, roof shingles, grass and shrub material, glue and more. Built model is 242 x 231 x 255 mm. There are text instructions in English. Never started. All of the contents are still factory sealed. There is a full color catalog included of the other 58 available kits.

Revell P-61 Black Widow - 'Times A Wastin' (Snuffy Smith) Major Smith 418th NFS Pacific 1944(4 kills in one night) or 'Husslin' Hussy' Nose Art, 1/48, 85-7546

Plastic Model Kit,   Box Condition: Good++

Sold   

Dated 1998. Very well detailed model from the original Monogram molds. Includes optional parts, decals and paint guide to make the A or B variants. Features very fine raised panel lines and recessed control surface outlines, highly detailed interior with all crew stations, optional position canopy, detailed wheel wells, removable cowl with detailed engine, optional position wing flaps and crew boarding door with stairs, rotating turret with elevating guns, optional drop tanks and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Guillows Messerschmitt Bf-109 / Hawker Hurricane / Supermarine Spitfire / P-51D Mustang - 16.5 to 17.25 Inch Wingspan Balsa Flying Model Airplanes, 505

Wood Model Kit,   Box Condition: Sealed Mint to Exc++

Sold   

SALE!! Includes all four stick-and-tissue balsa flying models kits. Mustang, Hurricane and Spitfire are still factory sealed. The Bf-109 has never been started. Inventoried complete with all parts and instructions present. All wingspans range from 16.5 to 17.25 inches.

Guillows Supermarine Spitfire - Flying Aircraft Model, 50-10

Wood Model Kit,   Box Condition: Good++

Sold   

Rare stick-and-tissue model dated 1954. This was part of Guillow's extensive '50' line of models with wingspans between 16 and 24 inches. These were very advanced kit for their day, featuring all die-cut balsa parts, stripwood and spars, plastic cowl and wheels, , completely finished wheels and thrust button, plastic prop, metal prop shaft, covering tissue and superb plans with numerous construction details. Never started. NOTE: missing canopy. Otherwise inventoried with all other parts and plans. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.

Guillows Cessna 170 - 24 Inch Wingspan Flying Model, 1/18, 302

Wood Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. High quality stick-and-tissue flying model that can be flown rubber power, .020 gas power or electric power. Features light plastic nose cowl, acetate for windows, plastic prop, 'razor sharp' die cut balsa parts, rubber motor, firewall for gas engine, covering tissue, wheels, landing gear wire, decal sheet and step by step instructions/plans.

Revell TWO P-51B Mustang III - USAAF 26th FS 51st FG Co. Tex Hill Kunming China 1945 / RAF No. 112 Sq Tantarella Italy 1944, 1/72, 04137

Plastic Model Kit,   Box Condition: Exc++

Sold   

SALE!! Includes two complete kits. One is never started and complete. NOTE: the other has very minor professional sub-assembly: seat, control stick and panel are glued to the floor. There is no other assembly. Includes all parts, decals and instructions. 1998 issue. Excellent kit from newer molds. Features all fine recessed panel lines, very good cockpit detail, optional RAF or USAF exhaust, optional opened or closed rear cooling scoop, optional position landing gear, detailed gear wells, optional load-out including bazooka rocket launchers, 75 gallon drop tanks and decals for the two aircraft listed.

Matchbox Z-38 Narvik Class Destroyer, 1/700, PK-62

Plastic Model Kit,   Box Condition: Good

Sold   

1986 issue. Waterline kit with very good detail. NOTE: this kit has "professional" quality minor sub-assembly as follows: hull halves and deck assembled. There is no other assembly. Inventoried complete with all parts, decals and instructions present.

Hasegawa Boeing 767 Air Canada, 1/200, NTL-H4

Plastic Model Kit,   Box Condition: Good+

Sold   

Still factory sealed. Special and very limited Canada issue arranged and imported by SI (Shaben International) in Edmonton. Large and extensive Air Canada decal sheet is excellent and by Carmichael. High quality moldings optional position landing gear, display stand and includes extensive decals.

Aurora Boeing 707 Astrojet American Airlines, 1/104, 380-250

Plastic Model Kit,   Box Condition: Good

Sold   

1971 hardbox AURORA block letters logo issue. This kit is made from the original molds and represents an early configuration 707. Features cut out side windows, clear cockpit windows, full color American Airlines decals, full landing gear and the large silver/gray three-arm display stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Billing Boats Andrea Gail 608 Fishing Boat The Perfect Storm - 36 cm Plank On Frame Hull Wooden Ship Kit, 1/60, 6087

Multimedia Model Kit,   Box Condition: VG

Sold   

Very highly detailed model of the actual fishing vessel that departed Gloucester Harbour, Massachusetts on September 20, 1991 with six crew on board. The crew intended to make a fishing trip for swordfish in the area of the Grand Banks of Newfoundland, Canada. After fishing, the crew began the return trip on October 26-27, 1991. She never arrived. The Andrea Gail 608 was reported missing by the owner, Mr. Robert Brown on Oct 30. And extensive air and sea search utilizing Canadian and USA resources never found a trace of the ship or crew. They were lost at sea in what one meteorologist referred to as the "Perfect Storm." A book written about this ship and storm was a national best seller and was turned into a major motion picture. The actual kit features laser cut hardwood, strip hardwood, numorous brass and metal fittings, some injection molded details, all rigging material, detailed heavily illustrated instructions and more. The kit has not been started. Internal factory sealed parts and the few parts that were never sealed have been inventoried complete.

Hobby Craft Avro CF-105 Arrow, 1/48, HC1651

Plastic Model Kit,   Box Condition: Good

Sold   

Very rare, large-scale Arrow with recessed panel lines, good cockpit, crew of two, detailed landing gear, external missile load, centerline tank and decals for all five aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Aurora Avro CF-105 Arrow, 1/80, 124-129

Plastic Model Kit,   Box Condition: VG

Sold   

Rare 1958 hardbox issue with fantastic Jo Kotula artwork. For the time, this was a very nice kit with good detail. Molded in white and clear with the Aurora 'Triangle World' base. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Pyro 1915 Model T Ford Coupelet Vintage Brass Car, 1/32, C451-125

Plastic Model Kit,   Box Condition: Good

Sold   

1967 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box. The model includes rubber tires, brass plated parts, colored injection molded parts and clear parts. Features detailed chassis, complete motor and interior and a removable hood or 'bonnet'. NOTE: this kit has very neat and minor assembly. The chassis, body and rear deck are assembled to 'professional' quality. There is no other assembly and zero painting. Inventoried 100% complete with all parts and instructions.

Revell The Nina From Columbus Voyage of Discovery, 1/90, 5630

Plastic Model Kit,   Box Condition: Good-

Sold   

From 1992. Large scale model with 118 pieces and excellent detail typical of all Revell sailing ship kits. Comes with preformed sails, rigging thread, directions/rigging diagrams, and colorful markings and flags. Never started. Inventoried and NOTE: missing one part - the tiller (rudder handle). Very easily made. Otherwise includes all other parts and decals, flag sheet and instructions.

Revell Santa Maria Columbus' Flagship, 1/90, 05480

Plastic Model Kit,   Box Condition: Good+

Sold   

From 1992. Large scale model with 137 pieces and excellent detail typical of all Revell sailing ship kits. Comes with 7 figures, preformed sails, standing and running rigging threads, directions/rigging diagrams and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Frontier 20 Mule Team Water Tank, 1/24

Wood and Plastic Model Kit,   Box Condition: Good+

Sold   

Very rare. Big scale kit measures 6.75 inches tall without tongue; over 8 inches long with tongue. Well detailed with full frame, swivel plate, forward and rear bolsters, brake shoes, water tank cover and even a spigot shut-off. Features completely machined hardwood water tank, pre-cut and die-cut hardwood frame parts, four beautiful injection molded spoke wheels, full size plans with parts identifier drawings, history of the prototype and detailed instructions with painting guide. Frontier Novelty Manufacturing Co. of Los Angeles California was founded by Eli LaCaille. Mr. LaCaille specialized in kits from the 'Pioneering Days' of the USA. He probably began production in the 1940s. By 1951 he was selling 85,000 kits a year. It was also called 'Frontier Manufacturing Company' and that address was given simply as 'Hollywood, California.' These were deluxe, high-quality multi-media models that included the Ox Cart, Buck Board, Covered Wagon, Stage Coach, Ranch Wagon, Chuck Wagon, Surrey With The Fringe On Top, Ore Wagon, Beer Wagon, big-scale 10 Mule Team Borax vehicles, Top Buggy and more.