Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell 1968 Pontiac Firebird 400 Ram Air - Build it Stock or as 'Thumper II' Drag Car, 1/25, 85-2342

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Contain extensive optional parts and decals to build one of two versions. Nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in white plastic, clear, chrome plate and with rubber tires.

Testors Lockheed AC-130A Hercules Gunship - 16th Special Operations or 1st SOWg, 1/72, 691

Plastic Model Kit,   Box Condition: Good-

Sold   

Very highly detailed kit with markings for two aircraft. Features a complete cockpit, cargo bay, guns, working cargo ramps, ALQ-87 ECM pods, Low Light Level TV (LLLTV) and AN/ASD direction finder dome. Over 180 parts. The kit has never been started. Internal factory sealed bags including decals and instructions. NOTE: box looks much better than the 'Good-' grade but has tears on the back, hence the low grade.

G-Mark Twin .30 (30 Twin) With Champion Spark Plugs - Gas Engine for RC Flying Model Aircraft

Metal Model Kit,   Box Condition: No Box

Sold   

Older twin cylinder engine from G-Mark. Always stored inside. This engine was gently used and is in excellent, complete condition with the original side mount carb. The interior is well preserved with oil. The pistons tops are very clean. If you remove the plugs, the engine turns freely. With the plugs installed, there is high compression. Both plugs are Champions; one is a V-2 and the other a VG-3. I have no way to test this engine. It came from a collector who, as standard practice, tested and properly adjusted all his engines before storing them.

Strombecker Convair XF2Y (YF2Y-1) Sea Dart - Supersonic Float Plane - With Rivet Detail - (XF2Y1), 1/60, D25-100

Plastic Model Kit,   Box Condition: Exc+

Sold   

From the 1950s. With an unusually nice 'excellent+' box with great color. Nicely done kit for the time. Molded in dark blue plastic. The limited first issue is the same part number and in the same box but has no rivet detail on the aircraft. The second issue (this one) does have rivet detail. Has very colorful decals for this unusual and beautiful aircraft. Never started. Inventoried with all parts, decals and instructions present. Strombecker was very well known for producing the finest pre-carved hardwood aircraft and missile kits, but they had a very short journey into the plastic model field. After making the Sea Dart kit in 1956, they added four more for a total of 5 injection molded aircraft kits. All were discontinued in the mid 1960s. The Sea Dart was a supersonic design that could take off and land from water using retractable hydro-skis. Five prototypes were built and over 300 test flights made. The advent of the super carrier spelled the end of the Sea Dart, although 4 still exist on display today.

Monogram US Lee Tank M3 - USA - Soviet - British Versions, 1/32, 6502

Plastic Model Kit,   Box Condition: Good+++

Sold   

1983 issue. Rare large 1/32 scale armor kit. Has decals for all three versions. Bogey system and flexible track assemblies are movable, guns move and turret rotates. Includes two crew members, extra track links, packs and tools. The kit has never been started. Some parts are still internal factory bag sealed and the others have been inventoried 100% complete including decals and instructions.

Monogram British Grant M3 Medium Tank, 1/32, 7535

Plastic Model Kit,   Box Condition: Good+

Sold   

1973 issue. Rare large 1/32 scale armor kit. Very well detailed. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions. NOTE: There are no diorama instructions.

Blue Water Navy USS West Virginia Battleship - 1941 Configuration, BN350100

Multimedia Model Kit,   Box Condition: Exc

Sold   

Very high quality model. The master was researched in depth and built to museum standards. In making the molds, the silicone was de-aired in a vacuum chamber; then the resin was pressure cast. This method makes for virtually air-bubble-free parts with flawless detail. Scale fidelity and historical accuracy are top-rate throughout. Requires assembly and painting - photo shows assembled and painted model. Includes museum quality resin castings, metal castings and photoetched brass parts. Can be built waterline or full hull. Includes very good pictorial and text instructions. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Heller HMS Victory with Sails, 1/100, 808971

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very large and very highly detailed kit over 43 inches long with 2107 parts. The kit is from the same molds as Airfix. This version includes billowing vacuform sails. Widely considered the most detailed model ship ever injection molded. Includes parts in several colors, full standing and running rigging instructions, standing and running rigging materials, sails, detailed plans/instructions, decals and flags.

MPM Curtiss Hawk III Model 68 - Chinese or Thai Air Forces, 1/72, 72137

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Limited run kit. Has decals for both versions. Nicely detailed moldings and photoetched details.

Airfix BAC Canberra B(1)6 - Royal Air Force or B.20 Royal Australian Air Force, 1/72, 05012-8

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Can be built as RAF or RAAF version. Features full cockpit, moving control surfaces, dual position landing gear, a wide variety of external stores, bomb bay detail and optional position bomb bay doors.

AMT 1972 Chevrolet Nova SS - 2 In 1 Kit - Build It Stock or Pro Stock/Racing, 1/25, 31547

Plastic Model Kit,   Box Condition: Exc

Sold   

Nice kit that can be built factory stock or race. Features detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Monogram 1955 Cadillac Convertible - Four Star Issue, 1/20, P4-295

Plastic Model Kit,   Box Condition: VG-

Sold   

Dated 1955. Very rare early kit and the first issue. The 1955 Caddy was Monogram's 3rd car kit; the Midget and Hot Rod were first and second. Box is graded 'very good-' as shown. It has four solid corners, no tape or tags, no marks from tape or tags, no missing or damaged litho and no fading. It does have light to moderate wear and light to moderate staining as shown. Inside, the kit is factory new with all original cardboard packing intact and the small parts are still sealed in the original factory cello bag. It even has the original, still sealed tube of Mono-Glue! Large scale model features one piece body, full interior , chromed front and rear bumpers, molded detail underpan, rubber tires, clear windshield, convertible top boot metal axles and dog, man and woman figures. This model was issued in several different colors; this one is molded in a very smooth and glossy baby blue plastic (the same color as the box top). Never started and inventoried 100% complete with all parts, glue, very early small Monogram fold-out kit catalog and near mint instructions.

Monogram 1936 Ford Coupe Street Rod - Early Iron Series, 1/24, 7554

Plastic Model Kit,   Box Condition: VG-

Sold   

1974 Monogram-Mattel issue molded in gloss red and black, clear, chrome and with rubber tires. Very nicely detailed kit. Features detailed chassis and suspension, full engine and engine compartment, removable hood, rear trunk spare tire mount, full interior, working rumble seat and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Aurora Curtiss JN-4 Jenny, 1/48, 114-98

Plastic Model Kit,   Box Condition: Exc+

Sold   

First issue dated 1957 with 'Famous Fighters' oval logo and sunburst inside. Jo Kotula artwork. The kit has never been started. Inventoried 100% complete with all parts decals and instructions.

Hawk Granville Gee Bee 1932 - Thompson Trophy Winner - One Piece Box Issue 1949, 1/48, 601

Plastic Model Kit,   Box Condition: Good

Sold   

Very rare. For the advanced model collector. This is a model kit with a fascinating history for it is among the early injection molded kits produced in the United States (please see the article about early USA kit production on this website). The Hawk model company was the most innovative in America and had been making constant 1/48 scale models in wood with metal accessories since the late 1920s. During the re-run of the World's Fair in 1933, Hawk may have made the world's first injection molded airplanes models - but they were not kits. The models were completely finished and were on display for the then-large sum of $25 each. The Mates brothers, who founded and ran Hawk, were quick to incorporate this new technology by replacing the metal detail parts with injection molded details to the wooden kits in the late 1930s. During the war, Hawk put it's injection molding knowledge to work making ID models for the US Armed Forces. Originally there was a nation-wide program to have children and adults make these from wood, but consistency was an issue - injection molded solved this problem. Immediately after WWII in 1946, Hawk made the Curtiss Racer model injection molded in black tenite. The box was a simple one-color affair. This may have been the first injection molded airplane kit produced in the USA; another contender is the Varney's PT-17. Both met a very cool reception at hobby shops. Hawk quickly changed the Curtiss box to two colors and added box artwork while molding the kit is bright yellow acetate. In 1947, Hawk approached toy stores since hobby shops were giving the kit poor promotion. The toy stores did much better. Spurred on by toy store sales in 1947, Hawk added four classic racers in 1948, all molded in acetate - the Gee Bee, Howard Ike, Laird Solution and the Supermarine S6B. In 1949, Hawk switched to polystyrene. This is the 1949 issue. The kit has not been started and is 100% complete. The instructions are in excellent condition. The box has great color but has wear typical of these early one-piece boxes. Please note that this early kit did not come with decals. The markings are raised in the plastic and the instructions tell how to paint them.

Hasegawa BMW 327, 1/48, 36013

Plastic Model Kit,   Box Condition: Exc++

Sold   

Very well detailed kit in 1/48 scale with 60 parts and figure as shown. Features full interior and can be built with top up or down, with boot or without. Includes extensive decals with pinstripes. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Boeing 727-100 Europa Jet Lufthansa, 1/144, H240

Plastic Model Kit,   Box Condition: Exc-

Sold   

Early short-body 727 variant. Early Revell of Germany issue with a Lufthansa Logo on the box art as well as darker composition in the painting. Landing gear can be built up or down as can the rear passenger loading ramp (Airstair Door). The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram North American F-86 Sabre Jet, 1/48, 5427

Plastic Model Kit,   Box Condition: VG

Sold   

NOTE: builder kit only, please read carefully. Very nicely detailed kit of the famous Korean War fighter. 1983 issue. Includes full cockpit and landing gear detail, optional open machine gun bay and hinged flaps. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: decals are from Monogram F-86 issue #5402 'The Paper Tiger' FU-958. Instructions are quality photocopies from F-86 issue #6049.

Roco DB Round Roof Combine/Freight Car - HO Scale Train, HO, 46971

Plastic Model Kit,   Box Condition: Exc++

Sold   

New in the box - never used and complete. Very highly detailed HO train. Completely factory assembled, painted and lettered. Ready to run.

Roco DB Riv Cattle / Livestock Transporter Car (Stock Car) - HO Scale Trains, HO, 46035

Plastic Model Kit,   Box Condition: Exc

Sold   

New in the box - never used and complete. Very highly detailed HO train. Completely factory assembled, painted and lettered. Ready to run.