Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Heller Canadair CL-415, 1/72, 80370

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Turboprop fire-fighting flying boat. Detailed kit with 108 pieces and large decal sheet.

Pyro Spanish Galleon Emperor Charles V, B381-75

Plastic Model Kit,   Box Condition: VG++

Sold   

1960s issue with great artwork. Nicely molded small scale ship model. Measures about 5.5 inches long when assembled. Includes full hull with molded wood plank and grain detail, separately molded anchors, cannons and a few other deck details, molded ratlines, masts, billowing sails and display stand. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Pyro Golden Hind - The Ship of Sir Francis Drake, B365-75

Plastic Model Kit,   Box Condition: Sealed Exc+++

Sold   

Still factory sealed but the seal has splits. One in series of many small scale ship kits that Pyro made in the late 1950s/60s. Between 5 and 6 inches long when assembled. Well detailed for the size with fine molded detail, full hull, display stand and billowing sails.

Life-Like HMS Revenge (Ex-Pyro), 1/110, B263-125

Plastic Model Kit,   Box Condition: VG

Sold   

From the early 1970s and original Pyro molds. This kit is from the excellent intermediate size sailing ship series. Overall length is about 8 inches when assembled. An excellent kit for its day (the 1960s), it features full hull, intricate wood planking and texture, detailed decorative higher sold moldings, separately molded deck cannon/carriages, anchors, wall and more. Includes separate masts, ratlines and full billowing sails. Molded in wood brown and ivory. The kit has never been started. It has been inventoried complete with all parts and includes instructions. The Revenge was an Elizabethan Galleon launched in 1577. Revenge had 46 guns and was 92 feet long. She was part of Sir Francis Drake's fleet of 80 ships that defeated the Armada. In 1661 the Revenge was attacked by a fleet of 16 Spanish Galleons. She sank two and disabled two of her enemy before being forced to surrender. Three days later she was sunk in a storm while returning to Spain as a war prize.

Bandai D4Y2 Suisei Judy Bomber (ex-Kogure), 1/40, 8506-275

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare large scale Judy from older, former Kogure molds. Includes good interior and engine detail. Molded in green, silver, black and with clear canopies. Kit features retracting landing gear, working air/dive brakes, moving ailerons, detailed interior, optional position canopy, bombs and drop tanks. Factory sealed bags with decals and instructions.

Revell Dick Landy's 1968 Dodge Charger, 1/25, 85-2573

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires.

AMT 1967 Ford Mustang GT Fastback, 1/25, 31550

Plastic Model Kit,   Box Condition: Exc

Sold   

Very nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

AMT Chevrolet 1959 Corvette - Fuel Injection - Stock or Custom, 1/25, 6588

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Features all parts needed for stock or custom versions, Fuel Injected 290 hp 283 CID engine, opening hood and detailed interior and chassis. Includes the following optional parts- 5 spoke Mag wheels, hood scoop, tonneau cover, side pipes, spotlights, side mirrors, aerodynamic headrests and more. Over 85 parts molded in color, clear, chrome and rubber.

AMT Chevrolet 1963 Corvette Stingray - Split Window Coupe, 1/25, A163

Plastic Model Kit,   Box Condition: Exc

Sold   

Can be built in stock or custom versions. Custom version contains different intake manifolds, 4 Weber carbs or supercharger with "Bug Catcher" injector, drag headers, racing tires, two custom helmets, exhaust tips, drag chute and more. Model features underside detail, complete interior and engine/compartment and opening hood. Molded in white, chrome, clear and rubber. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Revell USS Pennsylvania Battleship, 1/720, H486

Plastic Model Kit,   Box Condition: Exc+++

Sold   

Softbox issue dated 1969. Builds waterline or full hull versions. Well detailed small scale model of the Arizona's sister ship. Never started. Factory sealed bag or inventoried 100% complete with all parts and instructions.

Revell Curtiss P-40E Flying Tiger, 1/32, H283

Plastic Model Kit,   Box Condition: Good

Sold   

Kit is complete regardless of the note written on the box top. Second issue dated 1969. Very good quality for that time. Features authentic Flying Tigers Chinese markings, detailed Allison engine, highly detailed cockpit, retractable landing gear, movable wheels and prop, movable control surfaces, belly tank and pilot figure. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: the decals are 100% intact but one 'sharks teeth' transfer has age cracking.

AMT Longnose Mustang Gas Rhonda With 45RPM Record, 1/25, T307-200

Plastic Model Kit,   Box Condition: Good

Sold   

Rare kit in this condition. Even includes the record 'Sounds of Drag Racing Part 2: Funny Cars! Featuring Gas Rhonda.' Record is in excellent condition. Well detailed kit with full blown motor, complete drag rail chassis with separately molded front and rear suspension, sway bar, front axle, tie rods, disc brakes and drive shaft, racing cockpit with roll bar, instruments, steering wheel and gear, pedals, shift lever and hand brake, tilt up body with body support and very extensive decals. Molded in white, red-tinted clear, chrome and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes excellent decals and instructions.

Fotocut World War I Aircraft Details - Spoke Wheels / Machine Guns / Windscreens / Cockpit Parts + More - Bagged, W1003

Metal Model Kit,   Box Condition: Sealed Bagged

Sold   

Still factory sealed. Beautifully photoetched parts 1/72 scale. Includes numerous axial and two-cross spoke wheels, complete machine gun kits, misc. cockpit details, windscreens and many more details. Enough for several models.

Squadron (2) Curtiss P-36 / P-40B Replacement Canopies, 1/72, 9115

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Very well molded, crystal clear two canopy set in 1/72 scale. Never used and still sealed in the original Squadron ziplock bag. These clear and thin canopies are a superior upgrade to the thick canopies supplied with most kits.

Squadron (2) Bf-109 B/E Replacement Canopies, 1/72, 9106

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Very well molded, crystal clear two canopy set in 1/72 scale. Never used and still sealed in the original Squadron ziplock bag. These clear and thin canopies are a superior upgrade to the thick canopies supplied with most kits.

Pyro 1930 Packard Boat-Tailed Roadster, 1/32, C343-79

Plastic Model Kit,   Box Condition: Exc-

Sold   

1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. The model includes colored plastic, chrome plated and clear parts. Features detailed chassis with suspension, stearing linkage and fuel tank, detailed engine with removable hood, spoked wheels, full interior and top boot. NOTE: this kit has some assembly. Quality is excellent - no gaps, no visible glue on outside surfaces and correct allignment. The following have been assembled - hood halves, three body main parts and engine halves and head. There is no other assembly and no painting. Inventoried 100% complete including instructions.

Aeroclub WWII Bucket Seats and Control Sticks, 1/72, V053

Metal Model Kit,   Box Condition: Exc-

Sold   

Precision metal castings. Two bucket sets and two control columns. Much greater detail than injection molding. Never used and complete.

Blue Water Navy USS Enterprise CV6 Aircraft Carrier, 1/350, BN35054

Resin Model Kit,   Box Condition: Exc

Sold   

The only 1/350 scale kit of the legendary CV-6 USS Enterprise, the most successful ship in the history of the US Navy. Blue Water Navy states on the cover that they produced 'The Finest 1/350 Scale Resin Ship Kits On The Planet' and that was no idle boast. First of all, the masters were researched in depth and built to museum standards. In making the molds, the silicone was de-aired in a vacuum chamber; then the resin was pressure cast. This method makes for air-bubble-free parts with flawless detail. Scale fidelity and historical accuracy are top-rate throughout. This kit features a full hull or waterline version, a full length hanger deck that is loaded with detail, a very large number of photoetched parts including a full-length flight deck that is a masterpiece in itself. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions. This kit must be shipped insured. If you do not know the history of this ship, please read the book 'The Big E.'

Hawk OV-10A Bronco, 1/48, 561-100

Plastic Model Kit,   Box Condition: Poor

Sold   

Hardbox issue from 1966 with John Andrews artwork. Tri-Service markings. The only 1/48 injection molded kit of the short-wing 'A' Variant. Includes gun packs, AIM-9 Sidewinder missiles, bomb load and optional position canopy. NOTE: this kit has assembly. The wing halves and boom halves have been assembled. Quality of assembly is 'very good' to 'excellent'. Some liquid glue is showing but is smooth. There is no other assembly and no painting. Inventoried with all parts, decals and instructions. Box has bug damage on the sides; hence the 'poor' grade. Decals and instructions are 'excellent' and damage-free.

AMT Indy Drag Combo Chevy II Wagon / Chevy II Funny Car / Trailer - 3 in 1 Racing Team, 1/25, T357-300

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare. Includes all three kits. The box is 'very good+' with nice colors, four solid corners, no tape or price tags and with general wear as the only flaw. Inside, the kit has never been started. The Chevy II Funny Car and it's associated paperwork is still in the factory sealed bag. The trailer, with it's paperwork, is still in the factory sealed bag. The Chevy II Wagon is not factory sealed but has not been started and is inventoried 100% complete with all parts and instructions. Funny Car and trailer are molded in white (+chrome and clear for Funny Car) and the wagon is molded in a very light tan, clear, chrome and with rubber tires. Decals are in 'very good++' condition. They are not curled, have no yellowing and a small chip missing from one stripe as the only flaw. Also included is the Chevrolet 'Youth in Action' brochure.