Lindberg Curtiss F11C-2 Goshawk - (F11C2), 1/48, 535-79
Plastic Model Kit, Box Condition: Good+
$36
1950s hardbox issue with fantastic Ray Gaedke artwork. Nicely molded and detailed kit for that time. Includes rigging photos for spreader bars and wire placements. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Lindberg Mars Probe Communications Satallite, 1/200, 91003
Plastic Model Kit, Box Condition: Sealed NM
$22
Still factory sealed and from 2007. This is a modern reissue from the original 1950s molds. These molds were also reissued in 1969 and the 1970s as well. Molded in correct white with clear green tinted parts. Features three state rocket that snaps apart, cargo loading truck, interior fuel tank, and detailed removable satellite with removable cover and interior instrument group.
MPM Vickers Wellington Mk.IC/VIII Maritime Patrol, 1/72, 72540
Plastic Model Kit, Box Condition: Exc
$38
Hard-to-find and very well molded & detailed. Features injection molded parts with recessed surface detail, injection molded clear canopy/windows, resin and photoetched details and more. Never started. The resin and PE parts are still factory sealed; the other parts have been inventoried complete and include decals and instructions.
MPM A-20G Havoc South West Pacific Warrior - Miss Pam 388 BS 312 BG Hollandia New Guinea 1944 (Over 120 Missions) / Green Hornet 675 BS 417 BG Saidor New Guinea 1944 / Australia RAAF Hilda Shane 22nd Sq New Guinea, 1/72, 72539
Plastic Model Kit, Box Condition: NM
$34
Very high quality, limited production model that features all fine, recessed panel lines, very good cockpit, optional position canopy, complete twin row engines, enclosed gear wells including fore and aft bulkheads and more. Includes full color paint guide and decals for three different aircraft. Never started and inventoried complete with all parts and includes decals and instructions. NOTE: this kit has very minor, 'professional' quality sub-assembly as follows: landing light lens to lower wing half. There is no other assembly. Inventoried complete with all parts, decals and instructions present.
MPM North American P-51 / F-6A Mustang - USAAF 111th TRS 68th TRG Algeria 1943 / 154th Observation Sq North Africa April 1943 / RAF 225th Sq Desert Air Force 1943 - BAGGED, 1/72, 72085
Plastic Model Kit, Box Condition: No Box
$19
NOTE: bagged kit; there is no box. The box is shown for reference only. Detailed limited run injection molded kit with many cast resin details. Features fine recessed panel lines, highly detailed cockpit and radio compartment, enclosed & detailed gear wells and more. Includes paint guide and decals for the aircraft listed. The kit has never been started. The parts are all still in the internal factory sealed bags. Includes decals and instructions.
MPM TWO Hawker SeaHawk Mk 100 - FGA/RR / Mk.101 (Sea Hawk) Mk 100 - MFG2 (RB242) German Federal Navy / MFG2 (RB248) German Federal Navy / 300 Sq Indian Navy 'White Tigers' INS Vikrant Late 1960, 1/72, 72509
Plastic Model Kit, Box Condition: VG+
$25
SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts, decals and instructions present. Very nicely molded with all recessed panel lines. Features very good cockpit detail and decals for the three aircraft listed.
MPM TWO Northrop A-17A - USAAF 90th Attack Sq 1938 / Same Nov. 1937 / GHQAF Aircraft / 13th AS May 1938 Anti-Aircraft Exercises, 1/72, 72521
Plastic Model Kit, Box Condition: VG
$39
SALE!! Includes two models in one box. Kit #1 is never started and is still factory sealed inside. Kit #2 is never started and inventoried 100% complete. Both include instructions and decals. Very clean and detailed moldings with all fine recessed panel lines, detailed cockpit and injection molded canopy. Has decals and painting guide for the four aircraft listed above; three natural finish and one camo.
MPM Lockheed Vega Model 5 / UC-101 - Shell Aviation or USAAF - BAGGED, 1/72, 72522
Plastic Model Kit, Box Condition: No Box
$29
NOTE: bagged kit; there is no box. The box is shown for reference only. A very well made model of one of the greatest aircraft in aviation history. Wiley Post, Amelia Earhart, Hearst, USAAF and the RAF were among it's record setting pilots and operators. This kit features full cockpit and complete passenger cabin with floor and seats, optional wheel pants and other optional parts and decals with paint guide for the two aircraft listed. The Shell aircraft is a very colorful bright yellow overall with red trim. Never started and inventoried complete with all parts and includes decals and instructions.
MPM Messerschmitt Bf-109G-12 UPGRADED Issue - (Bf109 G-12) -BAGGED, 1/72, 72127
Plastic Model Kit, Box Condition: No Box
$24
NOTE: bagged kit; there is no box. The box is shown for reference only. Hard-to-find, high quality two-seat '109 model that features all fine recessed panel lines, numerous PE parts, many high-definition cast resin parts including a full twin cockpit with film instruments, enclosed and detailed landing gear bays, drop tank and more. Includes four-view paint guide and decals for two different aircraft. Never started. The resin and PE parts are still in the internal factory sealed bags; the plastic parts have been inventoried complete and includes decals and instructions.
Ace BTR-D Airborne Armored Transporter, 1/72, 72116
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale. Includes a large fret of PE parts. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Ace BREM-2 Recovery Vehicle, 1/72, 72130
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Ace Nona 120mm Self-Propelled Howitzer / Mortar 2S9, 1/72, 72113
Plastic Model Kit, Box Condition: VG
$14
Made in the Ukraine and highly detailed for this scale. Includes a large fret of brass PE parts. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Academy Jagdpanzer Kanone - Motorized, 1/48, 1323
Plastic Model Kit, Box Condition: VG+
$26
Designed for realistic motorized operation through the sprocket driving the tracks. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Academy CVN-69 USS Eisenhower Aircraft Carrier, 1/800, 1440
Plastic Model Kit, Box Condition: VG
$16
Very finely molded and nicely detailed full-and-one-piece hull model featuring full propeller and rudder detail, optional position aircraft elevators, one piece flight deck, detailed island structure and airwing of F-4, A-6, EA-6, F-14, A-7, RA-5C and Hawkeye aircraft & Seaking helicopters. Includes a very large decal sheet with full flight deck markings and even decals for the aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Includes additional aircraft with the rudders glued very neatly to the fuselages.
SNAP 280mm Atomic Cannon With 2 Gun Transporters - (M65) - (ex Adams), 1/40, 53-398
Plastic Model Kit, Box Condition: Good-
$275
Very rare issue of this incredible kit. This Classic Cold-War model was originally designed and created by Adams. In the late 1950s, Adams closed down and sold Athearn the molds; Athearn then reissued the kits under the name SNAP. This was a short-lived arrangement. To boost sales, Athearn even approach Marusan in Japan where some were joint-issued as Marusan-SNAP kits. The molds were stored for quite some time then acquired by Life-Like much later. The Atomic Cannon was the Army's 20 mile range gun that could fire shells that contains small atomic bombs. The model is very highly detailed for that time and features transporters with movable wheels, towing yokes, fully detailed cab interiors & complete suspension, elevating and swiveling machine guns; the Atomic Cannon itself can be configured for firing or towing positions, the barrel elevates by real operating gears, the carriage rotates 360 degrees on platform and it actually fires 2 "Atomic" shells. Includes crew of 7. Inside, the model is factory new. It has never been started.. The parts that were factory sealed (in two bags) are still in those factory sealed bags; the parts that were never factory sealed have been inventoried complete. With decals and instructions. The decals are absolutely flat and in 'Excellent' condition with the typical yellowing as the only flaw. The instructions are in 'very good++' condition. The box is completely intact and 1005 present but is graded 'good-' because of moderate to significant wear as shown. The box sides are in the same condition as the top. The box tray is in the same condition - intact but 'good-' and includes the center cardboard divider. Please note that SNAP packed this model in a very large box- much larger than required. It makes for a great display of the incredible Adam's box artwork but does increase the shipping price. The amazing M65 280mm atomic cannon originally started life as a conventional artillery piece. Development first began in 1944 before the first atomic weapon had been tested. Far from being 'just another giant gun', the M65 was carefully designed to be a very mobile and versatile weapon. Liberal use of aluminum and other light-weight metals kept the weight of the gun and both transports to about 85 tons, which is not much more than the largest conventional gun of WWII. As a result, it is light enough to be carried by trucks and cross bridges without collapsing them. Size was also a major factor, as it can fit inside landing craft, turn street corners of an amazingly small radius and travel as fast at 35 mph. The two transporters are required to move the gun, with one in back and one in front. Power is supplied to each tractor by a 6 cylinder engine with 375 horsepower. Both transmissions are manually controlled. These 4x4 machines can push, pull or parallel one another - with the gun slung between them. The driver of the front tractor has control of the brakes and throttles of both units and can communicate to the rear driver by telephone. The gun can be traversed in a complete circle and has a range of up to 20 miles. A complete 280mm batter consisted of two guns, four 5-ton trucks towing ammunition trailers, another two trucks pulling a pair of generator trailers (each with a 30 KW generator to furnish power to the guns, a 5th truck carrying four shell carts and a 2 1/2 ton shop van. The total crew was about 100 men. Each gun could be set up to fire in less than 12 minutes and can fire a round every two minutes.
SNAP Combat Jeep And Trailer - With 3 GIs - (ex Revell), 1/40, 148-98
Plastic Model Kit, Box Condition: Good+
$110
Rare model from the original 1950s Revell "S" Issue molds. Very well detailed featuring rotating wheels, radio, jerry cans, detailed chassis and suspension, tilting windshield, driver/soldier and general figure, detachable trailer with rotating wheels, generator, cable reel, packs, tool box and more. Molded in olive drab plastic. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. These molds must have had a very interesting history. The molds were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Adams never issued the kit. The famous HO model train manufacturer Athearn purchased the Adams molds and ended up with the jeep. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name & logo to a part (or two) of each kit. Then UPC (Universal Power Master) either leased or purchased (probably the former) the Adams molds from SNAP in the 1960s. While most UPC kits say 'Made in Japan' the ex-Adams models do not and say 'Made in USA'. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
SNAP USMC Winnie the Whale LVT A4 - With 75mm Cannon (Ex Adams), 1/40, 157-149
Plastic Model Kit, Box Condition: Good-
$54
1960s issue of this high-quality model from the original Adams Action Model molds. Features working bogies, flexible tracks, crew of two and four soldiers and more. Never started. The parts have been inventoried 100% complete and includes decals and instructions. NOTE: one small bogie wheel is a different shade of plastic; it is from an earlier issue of this same kit. These molds must have had a very interesting history. The molds were cut in the late 1950s, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but only Adams issued the kit. When Adams divested of the plastic kit business, most if not all of the molds were purchased by Athearn, the famous craftsman HO railroad kit manufacturer. Athearn called their new division SNAP Plastics with an address of Hillside, New Jersey. When SNAP ceased production, UPC issued this kit. While most UPC kits say 'Made in Japan' the ex-SNAP issues say 'Made in the USA' so perhaps they were molded by Athearn in New Jersey or at least a contractor. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk-purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
SNAP G.I. Soldiers - ex Revell GI Figure Set - (GI Soldiers), 1/40, 5149-100
Plastic Model Kit, Box Condition: Good++
$95
Rare model from the original 1950s Revell "S" Issue molds. Very highly detailed and includes the following figures - general, radioman, 2 bazooka men, 2 mortar men with mortar, 2 machine gunners with tripod and machine gun, soldier with mine detector, soldier with flame thrower and 9 other infantrymen. Molded in olive drab plastic. Never started and inventoried complete with all parts and includes instructions. These molds must have had a very interesting history. It is assumed that these were cut by Revell or much more likely one of their contractors in the mid-late 1950s; perhaps they used Adam's mold cutter. On the surface, there is no sign that they were to be parts of the joint Adams/Revell 1/40 line but Adams never issued the kit. However, Adams must have had the molds because when the famous HO model train manufacturer Athearn purchased the Adams molds, they ended up with the Soldiers. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name & logo to a part (or two) of each kit. This GI Soldier kit is made in the USA. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
SNAP Hawk Missile Carrier - (ex Adams), 1/40, 159
Plastic Model Kit, Box Condition: Good+
$54
Rare early 1960s model from the original 1950s Adams molds. Well molded and detailed for that time featuring three Hawk Missiles, movable wheels and flexible tracks, elevating lift & supports, three figures and decals. Molded in gloss white and dark olive drab plastic. Never started and all parts and decals are still in the original factory-sealed bag. With instructions. These molds must have had a very interesting history. The molds were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Revell never issued the kit. The famous HO model train manufacturer Athearn purchased the Adams molds. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name (SNAP) & logo to a part (or two) of each kit. This Hawk Missile Carrier kit is made in the USA but is actually a SNAP export to Canada; the importer was 'International Games of Canada Limited' in 'New Toronto Ontario.' They used a silver overprint to block out the kit number and pric extension and then added '#159 in Canada.' Then UPC (Universal Power Master) either leased or purchased (probably the former) the Adams molds from SNAP in the 1960s. While most UPC kits say 'Made in Japan' the ex-Adams models do not and say 'Made in USA'. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
Tamiya IJN Junyo Aircraft Carrier, 1/700, 7776
Plastic Model Kit, Box Condition: Good
$29
Waterline model that is very highly detailed and finely molded and includes airwing. Never started and inventoried complete with all parts and includes decals and instructions.