Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell USS Missouri - Pre 'S' Issue Narrow Box, 1/535, H301-198

Plastic Model Kit,   Box Condition: Exc

Sold   

First release 1953 hardbox pre 'S' kit. This is the first ship that Revell cut the molds for. Earlier Revell ship releases were Ex-Gowland and Gowland molds for the small scale sailing ship series. The box is graded Excellent and it is one of the better (not the best but close) I have seen, with excellent color. There is some edge wear and clear tape neatly applied to one corner. Inside the kit is 100% correct. The plastic is the high gloss medium gray. The instructions are the correct 'large' release for the first issue. Never started. 100% inventoried complete with all parts, flag sheet and instructions present.

Revell F-100 Super Sabre 'S' Issue Box, 1/70, H236-89

Plastic Model Kit,   Box Condition: Good

Sold   

NOTE: builder kit ONLY. Please read carefully. This is an original "S" kit hardbox with original "S" instructions. However, the kit inside is from the original "S" molds but is a much newer issue, probably from the late 1970s. The plastic is silver like the original but not as glossy. The decals are from this newer issue too and are in 'mint' condition. There is an original Revell "S" clear Swivel Globe base included but NOTE it is missing the small clear clamp. Kit features pilot and cockpit, drop tanks, bombs and full landing gear. The airplane has never been started and is complete with all parts.

Comet North American P-51B Mustang Speed Glider - 18 inch Wingspan Flying Model, G2

Wood Model Kit,   Box Condition: VG++

Sold   

From 1944. The 'Speed Glider' here was designed by the great Carl Goldberg. This type of model was tied to a string, which was in turn connected to a wooden stick 2 or 3 feet long. An accomplished pilot could whip the aircraft around, performing an excellent variety of stunts. As you can imagine, the kit has very sturdy construction to take these high speed maneuvers. It features two sheets of die cut, thin hardwood parts, hardwood and balsa stock, two sheets of full color covering material with complete aircraft color, windows and insignia (which completely eliminates painting) and detailed plans with balance and flight information. The fuselage is profile, while the wings and tail surfaces are built up the traditional stick and tissue way. Although in the end, there is no tissue but the superb full color decorated paper wraps that cover all the surfaces of the model. This kit has never been started. Inventoried complete with all parts, covering papers and plans. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Comet Piper Cub J-3 - 25.5 inch Wingspan Gas or Rubber Powered Wooden Aircraft (J3), 1623

Wood Model Kit,   Box Condition: VG++

Sold   

From the early to mid 1970s. Large scale issue for rubber or gas free flight, or easily converted to RC using today's tiny and light servos and receivers. Box art is by Locher, who did a great deal of the Monogram box artwork also. Kit features traditional wood/tissue construction with all die cut parts, 'Tube-O-Matic' fuselage construction and 'Rugged Super X Simplified Non-Warping Wing' construction, colorful insignia sheet for civil or US Army versions, detailed full size plans with building instructions, die-cut printwood, factory-cut stripwood with leading and trailing wing edges, fully formed and finished wooden main and tail wheels & thrust button, hardware, tissue and plastic propeller. Never started and inventoried complete. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Comet Ryan SC - 15 inch Wingspan Powered Flying Model, 3103-69

Wood Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. 1970s issue. Kit features traditional stick and tissue construction, detailed full size plans, building instructions, hardware, wheels and canopy material (if required), tissue, rubber and propeller. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Comet Taylor Cub - 18 inch Wingspan Flying Balsa Aircraft, 3211-100

Wood Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed but the seal has multiple splits. From the mid 1970s. Kit features traditional wood/tissue construction, detailed full size plans, building instructions, hardware, wheels and canopy material (if required), tissue and propeller. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Mod-Ac Horse And Harness, 1/24, 053

Multimedia Model Kit,   Box Condition: Good-

Sold   

Rare. Age unknown - likely 1940s. This model contains a horse and full harness as an accessory to the extensive Mod-Ac carriage line in the same (1/24) scale. The horse is beautifully cast in one piece to the pose on the box top. There is no carving needed. Also includes harness material, formed wire parts, harness cutting templates and full instructions. Never started. The small parts are still in the factory sealed bag. The other parts have been inventoried complete with the directions. If it were not for Mod-Ac, we would not have many accurate models of early historic Western transportation; as an added bonus, they were all made to a uniform 1/24 scale. Mod-Ac was a manufacture of early hobby kits out of Los Angeles California. During World War II they issued a well known kit line of military vehicles. The company was innovative as this kit shows - the wide variety of materials, pre-carved wood and highly detailed plans and instructions put this model many notches above the 'make wood look like vehicle' type of kit.

Mod-Ac Hansom Cab Two Wheel Hackney One-Horse Carrige, 1/24, C9411

Multimedia Model Kit,   Box Condition: Good+

Sold   

Rare. Age unknown - likely 1940s. This is a very highly detailed period kit of a low, single-horse enclosed carriage invented by Joseph Hansom in 1834. It was used extensively in England and France and later came into use in the United States. The kit consists of black injection molded spoke wheels and clear carriage lamps, die cut flexible 'leather' plastic for the spring leaves, body sides, floor and roof from die-cut plastic sheet, wood parts all cut to shape, wire parts, leatherette upholstering material, shafts, full size plans and detailed instructions. The actual carriage itself (no horse equipment) measures about 4 inches long and the same in height when assembled. The kit has never been started. The small parts that were factory sealed are still factory sealed; the larger parts were never sealed and have been inventoried complete including plans and instructions. If it were not for Mod-Ac, we would not have many accurate models of early historic Western transportation. Mod-Ac was a manufacture of early hobby kits out of Los Angeles California. During World War II they issued a well known kit line of military vehicles. The company was innovative as this kit shows - the wide variety of materials, pre-carved wood and highly detailed plans and instructions put this model many notches above the 'make wood look like vehicle' type of kit.

Monogram Grumman TBF Avenger - Four Star Issue, 1/48, PA31-149

Plastic Model Kit,   Box Condition: Good+++

Sold   

First issue hardbox 'Four Star' kit from 1958. Model has many action features: Wings fold properly as on the real aircraft, landing gear retracts, bomb bay doors open and torpedo drops, machine gun rotates and elevates, and the prop and wheels turn. Includes four airmen. NOTE: kit has been started. cockpit tub has been painted and glued to the wing. Prop, engine and gun have been painted. Quality of work is excellent. Inventoried 100% complete with all parts, decals and instructions present.

Monogram Chance Vought F4U-4 Corsair - Four Star Issue, 1/48, PA82-149

Plastic Model Kit,   Box Condition: VG++

Sold   

1963 first issue hardbox with the early logo. Part of a hugely successful line of Monogram 1/48 scale World War II models. Features 'Working Action' with folding wings, retracting landing and tail gear landing gear, working arresting gear and rotating wheels and prop. Molded in gloss dark blue, black and clear. The kit has never been started. Inventoried 100% complete with all parts, both decal sheets and instructions present.

AMT Lola 70 Slot Car, 1/24, 9304-800

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare original issue. This is truly a 'Top Quality' slot car kit as the box top states. Features self-adjusting weight equalizers, adjustable brass chassis, machined aluminum wheels, new formula rubber rear slick tires, metal threaded axles, real knock-off wheel retainers made of aluminum, knock-off wrench, independent front wheels, new high torque motor, special cement, all hardware, pickups and contact wipes, beautiful scale 'Cyclolac' plastic one-piece body, many detail parts molded in ivory, clear and chrome plate as well as nylon bushing for all moving parts. The kit is not built. It has been inventoried 100% complete with all parts (some parts are off the trees). Decals and instructions are included. Instructions are in 'near mint' condition and the decals are only 'good+' with some minor bug damage and slight flaking along the right side. NOTE: the model is not built, clearly nothing has been glued or painted and the motor has never been wired up, with these kits it is always possible that some of the metal screw-together only parts have been assembled at some point then disassembled.

CA Atkins Spitfire Prototype, 1/72

Metal Model Kit,   Box Condition: VG

Sold   

Rare, limited issue, very high quality cast metal kit. Includes full instructions. Never started. The parts are still in the factory sealed bag.

Tamiya Vosper Fast Patrol Boat Perkasa - Motorized, 1/72, 79001

Plastic Model Kit,   Box Condition: VG+++

Sold   

Large scale and highly detailed. Includes unique two color extrusion molded hull and all hardware for motorizing. Easily converted to radio control (RC). Includes Re-280 motor. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Boeing SST Supersonic 2 Kits (2707), 1/200, H262-300

Plastic Model Kit,   Box Condition: Good+++

Sold   

Rare. First issue from 1967 with Boeing prototype markings. The kit contains two large 18 inch long SSTs, one in landing and one in cruise configuration. The Boeing SST modeled here is the second (2707-200) variant which still had the swing-wing design which proved impractical in this aircraft. The damaging effects of sonic booms over population centers ultimately contributed to the cancellation of the project. Never started. Inventoried 100% complete with all parts, decals and instructions.

Hasegawa Fock-Wulf FW-190 A-8 - 12/JG5 Leutnant Rudi Linz / 5/JG300 Unteroffizer Ernst Schroder, 1/72, 00006

Plastic Model Kit,   Box Condition: NM

Sold   

Very nicely molded and detailed. Features fine recessed panel lines, cockpit with pilot, drop tank and centerline bomb load. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram Mitsubishi Zero (Zeke) A6M5 - Four Star Issue, 1/48, PA73-98

Plastic Model Kit,   Box Condition: Good

Sold   

NOTE: Builder kit only. Not collectible due to very neat assembly, please read below. First issue dated 1962. This model is part of a very popular and successful line of 1/48 World War II kits that Monogram issued through the 1960s. Kit features retracting landing gear, rotating wheels and prop, pilot and cockpit and optional drop tank. NOTE: has very neat assembly. The fuselage halves, instrument panel and antenna are built to 'professional' quality. There is no other assembly. The cowling is nearly painted black; there is no other painting. Inventoried with all parts, decals and instructions present. NOTE: one drop tank half is green plastic instead of the correct silver. It is from a later issue of this same kit.

Airfix HMS King George V Battleship, 1/600, 906205

Plastic Model Kit,   Box Condition: Good+

Sold   

As with most Airfix ship kits, this one is also highly detailed and finely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Carl Goldberg Models Double Voodoo Combat Stunt - 36 Inch Wingspan Control Line, DG13-495

Wood and Metal Model Kit,   Box Condition: VG

Sold   

Designed and flown by Riley Wooten, famous Champion Combat flyer and designer. Features high quality wood die-cut balsa and plywood parts, fully formed leading edges, other wood stock as required for sheeting, etc., hardware pack, hinge material, covering tissue, "How To Stunt" brochure, "Tips On Combat" by Riley Wooten, Carl Goldberg kit Inspection Certificate, colorful Voodoo decals and full size plans with excellent instructions. The kit has never been started. It has been inventoried complete with all parts.

Condor German Missile A4 / V2 - (V-2) - Bagged, 1/72, 001

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - not box. The box is shown for reference only. Includes detailed launch pad and excellent painting guide. Never started. It has been inventoried complete with all parts and includes instructions.

Skywave Equipment for Modern Ship / Mk8 Gun / Mk6 / OTO Melara / 100mm 1968 / L/70 Beda / 30mm Goalkeeper / Sea Cat / Sea Dart / Exocet / Standard Launcher / Boat Container / Sea Gnat / Sea Wolf / GAM-BO1 / SCOT Aerial / SOG-56 / Lynx Helo / Type 1022 / UK Launch, 1/700, E-4

Plastic Model Kit,   Box Condition: VG

Sold   

The ideal upgrade for your 1/700 ships. These are very fine moldings with greater detail than standard parts and it includes many parts that do not come with standard ship models. Contains multiples of all the item shown on the box top. The kit has never been started. The parts are inventoried complete and includes instructions.