Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa General Dynamics F-16A Plus Fighting Falcon - USAF 50th TFW Hahn Airbase West Germany 'Gun Smoke' 1983 / 8th TFW 'Wolf Pack' Kunsan AFB Korea / Royal Netherland Air Force 311 Sq Volkel AFB Holland, 1/72, 601

Plastic Model Kit,   Box Condition: Exc

$22   

Superbly molded and builds up to a great model. Features all fine recessed panel lines, good cockpit and gear well detail, optional position canopy and pilot boarding stair and a very large variety of weapons. Includes decals for all three aircraft listed. Never started. It has either been inventoried complete with all parts or all parts are still in the factory sealed bag. Includes decals and instructions.

Pyro American Cup Racer - With Sails, 1/96, B328-400

Plastic Model Kit,   Box Condition: Good

$84   

Mid 1960s large-scale model of the famous schooner that would race between New York and Bermuda. Very nicely detailed and measures about 19 inches long when built. Features a one piece hull with separately molded rudder, full deck fittings, small boats with oars, multi-piece masts with separate gaffs, full vacuform billowing sails, rigging material and instructions for both standing and running rigging. The hull is molded in dark gloss green and the other parts are molded in a lite tan and swirl dark wood plastic. The kit has never been started. The dark wood parts are still in the factory sealed bags. The other parts have been inventoried complete including instructions. The vacuform sails are in mint condition.

Revell Aerojet-General Aerobee Hi, 1/40, H1814

Plastic Model Kit,   Box Condition: Exc

$39   

1996 reissue of the 1950s classic "S" kit. Features movable firing arm with working piston and cylinder, movable wheels, tow bar and detailed crew figures. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

AMT Livestock Trailer - (Wilson Livestock Van), 1/25, 31771

Plastic Model Kit,   Box Condition: Sealed NM

$44   

Still factory sealed. 2002 issue from the original 1970s molds. Very highly detailed and large kit scaled from the manufacturers drawings and measuring over 19 inches long. Features over 150 parts, opening rear doors, sliding overhead section, full suspension, two position stands and more.

ESCI Mikoyan Gurevich Mig-23 S Flogger B - 16th Frontal Aviation Command in East Germany or Kubinka Air Base Moscow Test Aircraft, 1/48, 4022

Plastic Model Kit,   Box Condition: Exc

$22   

Large scale Mig features very fine raised panel lines, optional position canopy, detailed landing gear, swing wings and underwing missiles and fuel tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Douglas DC-9 - N9DC Prototype, 1/120, H246-100

Plastic Model Kit,   Box Condition: Good-

$39   

First issue hardbox is dated 1966. Nicely molded kit includes optional position landing gear, movable wheels and a large sheet of very colorful and complete Douglas Prototype markings. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Verlinden Sherman M4/IC Composite Firefly Turret 17 Pndr., 1/35, 270

Resin Model Kit,   Box Condition: Exc

$38   

Rare and the only kit available to make a IC Firefly. This is a conversion kit and the recommended base kit is the commonly-available Italeri M4A1. Features a complete resin upper hull and turret, many other resin details, numerous photo-etched parts and heavily illustrated instructions. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The few large parts that were not factory sealed have been inventoried complete including instructions.

Italeri Sukhoi Su-27 Sea-Flanker, 1/72, 197

Plastic Model Kit,   Box Condition: Sealed NM

$16   

Still factory sealed. Well molded with fine raised panel lines and detailed down to the gear wells and cockpit. Includes decals for the Black Sea trials aircraft.

Faller Republic F-84F Thunderstreak - Luftwaffe / USAF / Netherlands, 1/100, 1084

Plastic Model Kit,   Box Condition: Good

$38   

Rare model kit from the early to mid 1960s and nicely molded for that time in silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Even includes the original Faller packing inspection quality control sheet.

AMT Chevrolet Corvette ZR-1 - King of the Hill Option, 1/25, 6277

Plastic Model Kit,   Box Condition: Exc

$38   

Very nicely detailed kit. Features 80 parts, detailed engine and compartment, underside and suspension and interior. Has opening hood, real rubber tires and optional ZR-1 decals. Molded in white, chrome, clear, red-tinted clear and with rubber tires. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.

Dale Newton - Red Ball Wood Refrigerator (Reefer) - Farmer's Co-Operative Creamery Co - 'Pelican Brand Eat More Butter' with Trucks, HO, 97

Multimedia Model Kit,   Box Condition: Exc

$34   

The Red Ball Line has been famous for fidelity and diversity for 70 years. Please read the article on this website covering the history of this manufacture. The box is present and is excellent but it is not shown in the photo. M. Dale Newton Red Ball HO scale kit with the famous quality heavy cardstock embossed and printed car sides. Also includes milled hardwood roof/sides and floor, correct cast metal trucks, sealed parts packet containing metal and plastic parts, wood and metal stock and full instructions. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including instructions.

Sterling Curtiss P-6E Hawk - 16 inch Wingspan Flying Model Aircraft that Drops Bombs in Flight, A10

Wood Model Kit,   Box Condition: VG

$59   

Excellent flying model from the early to mid 1960s that is designed for rubber free flight or control line. It includes an innovative system for dropping bombs in flight. Features stick and tissue construction, quality die-cut balsa parts, stripwood and spars, other wood stock as required, die-cut clear windshield, vac plastic details including radiator scoop, engine cowling, pilot bust, wheels pants, exhaust ports and more, finished wire landing gear struts, finished main and tail wheels, rubber motor, plastic prop, covering tissue and a big full color decal sheet. Includes excellent full size plans with detailed instructions. Never started. The small parts are still in the factory sealed bag; the parts that were never sealed have been inventoried complete. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling's offering to be 'deluxe' compared to other manufacturers.

Heller Breguet 693 - Buzco Issue, 1/72, 201-200

Plastic Model Kit,   Box Condition: Good

$20   

Sleek and beautiful, the Breguet 693 was a fast low-level twin engine attack bomber with a crew of two. Armament was one 20mm cannon and two machine guns in front and one turret mounted machine gun facing aft. Bomb load was 6 to 8 50 kg bombs. The kit has never been started. The parts are either still in the internal factory sealed bags or inventoried complete. Includes decals and instructions.

Premiere Shorts Tucano T.MK.1, 1/72, P1001

Plastic Model Kit,   Box Condition: Good++

$19   

This RAF Trainer aircraft is cleanly molded and detailed with recessed panel lines. Never started. Factory sealed bag with decals and instructions.

Hasegawa Mikoyan-Gurevich Mig-21 F13 Fishbed (Early Variant) - Czech / USSR / China, 1/72, JS012-200

Plastic Model Kit,   Box Condition: VG

$22   

First issue with rare rectangular Hasegawa logo. Includes decals for all three versions, supersonic drop tank and two Atoll wing-mounted missiles. NOTE: the drop tank halves are assembled to 'professional' quality. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.

Tamiya Sturmtiger 38cm Assault Mortar, 1/35, 35177

Plastic Model Kit,   Box Condition: Sealed NM

$48   

Still factory sealed. Very well molded and features detailed interior and exterior, crew member and separately molded track links.

Frog Westland Wallace - Red Series Issue, 1/72, F167

Plastic Model Kit,   Box Condition: Good+

$26   

Red Series Issue from the 1960s and a very finely molded & detailed model for that time. I have seen this model built up and it is excellent. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Orange Crush-Revell 1903 Ford Model A, 1/32

Plastic Model Kit,   Box Condition: Good

$79   

Very rare kit with a fascinating history. Around 1958/59, Orange Crush of Mexico offered a promotion. They offered free, colorful, plastic model cars if you collected correctly-marked Orange Crush bottle caps. The models are 1/32 scale Revell Highway Pioneer series - although there is no mention of Revell or Lodela anywhere on the box. Orange Crush had the boxes and even the instructions specially made for them with no mention of a manufacturer. They were never given numbers. The boxes were very thin and fragile cardboard. This has contributed to wear and you must be very cautious with them. The kit has never been started. The parts are still in the internal factory sealed bag and the instructions are sealed in the bag as well. You could redeem your caps two ways - at the Orange Crush truck and at a Modelandia Hobby House. The box sides show the 18 cars in the series. Orange Crush also released two full-color booklets and a complete paint set for the cars. A colorful cardboard box held 7 colors of paint in glass bottles, complete with 'Orange Crush' screw-on caps! The entire promotion was done in coordination with Modelandia Hobby House which had up to 19 stores. Modelandia's name appears on each of the boxes and the paint as well. Robina S.A. was the bottler or distributor of Orange Crush in Mexico at that time. The box side lists the other 18 kits with small color pictures of each and shows three sizes of OC - Family Size (Familiar), Grand (Grande) and Normal. You could also obtain models with Titan bottle caps. Titan was also bottled by Robina and came in large (Titan) and smaller (Titancito) sizes and apparently more than one flavor. We do not know how Orange Crush had access to the plastic kits or who sealed the internal bags with the Crush instructions inside them. We can assume that it may have been Lodela, since they would have had access to the Revell molds. It is not know for how long the promotion lasted, but Orange Crush was one of the most dominant soft drinks in Mexico at that time. Here is one clue: some boxes claim that Modelandia had 13 locations; other boxes, which obviously came later on, claim 19 locations. This may indicate that this promotion went on for a significant amount of time.

AMT 1951 Chevrolet Bel Air Convertible - Cruisin USA George Barris Custom, 1/25, 2253

Plastic Model Kit,   Box Condition: Sealed NM

$29   

Still factory sealed. 1980 issue that features detailed straight-six Stovebolt engine and engine compartment, opening hood, detailed underside with exhaust and suspension, complete interior, chrome parts, rubber tires, special decals and even special rear fender reflective stick-ons as shown on the build box top model.

Joe Ott Spitfire With Ott-O-Matic Formers - 22 Inch Wingspan Flying Wood Model, 2201

Wood Model Kit,   Box Condition: VG

$64   

Rare kit from the 1940s or very late 1930s. Every rarer in this condition - with a complete box and all contents never disturbed other than when I did the inventory. This is very unusual due to the age and their very fragile nature. This model is one of Joe Ott's mid-range line in size and price. It features glue in a metal tube, 2 sheets of the unique Ott-O-Matic formers on thick stock, factory-carved balsa wood propeller, thin hardwood wing ribs, factory-cut stripwood stock, a factory sealed paper envelope for the small parts (usually consists of fully carved thrust button, main wheels and metal prop shaft/rubber motor hook), clear material for windows, color insignia, covering tissue and excellent plans. The kit has never been started. The loose parts have been inventoried complete and the paper envelope is still factory sealed.