Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AMT 1993 Chevrolet Camaro Z28, 1/25, 8611

Plastic Model Kit,   Box Condition: Exc

$32   

Features over 100 parts, detailed engine and compartment, opening hood, detailed chassis, full interior and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

BaD Ship Models Virginia Class Cruiser USS Virginia CGN38 / USS Texas CGN39 / USS Mississippi CGN40 / USS Arkansas CGN41 - 73 Inches Long For R/C Or Static Display, 1/96, BSM-CGV

Wood and Metal Model Kit,   Box Condition: Sealed Exc

$595   

Still factory sealed. Rare and very large kit that can be built as any one of the four sister ships. True scale model can be built for static display or R/C operation. The model is plank-on-frame construction and features plywood and balsa parts, planking strips, other wood as required, molded polyester plastic parts (i.e. resin), vacuum formed styrene parts, metal stock, cast metal anchors and chain, two brass props, stuffing boxes, drive shafts, rudder assemblies, decal sheet and flag. Because of the common scale, many super detail fittings are available to make this a true museum piece (extra fittings not included.) There are even super-detailed 3D printed parts on Shapeways.com! Copy and paste this link for photos and more information on this kit: http://wmunderway.mysite.com/gallery21/gallery21.htm

Renwal Bristol F2B Aeroskin Major Andrew McKeever's Aircraft, 1/72, 268-79

Plastic Model Kit,   Box Condition: Exc-

$36   

Contains pre-colored Aeroskin fabric created to resemble fabric covered aircraft. No painting needed since all designs are printed on the fabric. You build the inner structure of the aircraft then cover it, similar to the construction of the actual aircraft. The kit has never been started. It has been inventoried complete with all parts and includes Aeroskin and instructions.

Paramount Boeing 727 -100 JAL 'Tone' Old Livery, 1/220, 6005-100

Plastic Model Kit,   Box Condition: Good

$42   

Rare kit from Otaki molds. It represents an early 'short' 727 and features very fine raised detail, full landing gear, a display stand and stunning early JAL full color decals just like the box art aircraft. This was back when airlines would name aircraft, and this one is 'Tone,' which is a river in Japan. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Paramount was based in Canada and sold kits from the mid 1960s to the early 1970s when they shut down. This exact kit lists Pawtucket, RI as the address with the contents made in Japan and the litho done in Canada. Most if not all of the kits were from older Otaki, Sanwa, Nichimo or Marusan molds although some remain unidentified. Kits for sale in Canada has three digit part numbers, and those destined for the USA had four digit numbers.

Airfix Dornier Do-217 E.2, 1/72, 383

Plastic Model Kit,   Box Condition: Good-

$22   

Very early T2 (Type 2) logo issue from the 1950s. Kit features movable elevators, rudders and ailerons, elevating gun and rotating turret, cockpit detail, four crew members and rotating wheels and props. NOTE: kit has minor assembly. Crew and cockpit have been very neatly assembled. There is no other assembly and no painting. Missing one mud guard. Otherwise inventoried with all other parts present including decals and instructions.

MPC 1970 Dodge Challenger Plum Crazy With Trailer - Stock / Racing Version / Barris Custom Version, 1/25, 1470-200

Plastic Model Kit,   Box Condition: Exc

$425   

Very, very rare and even harder to find in this condition. This is a one owner model that was kept in climate controlled storage. Features numerous optional parts for all versions, detailed engine and compartment, opening hood, full interior, chassis detail, a trailer, tool hitch, tool box and more. Molded in the correct 'Plum Crazy' purple, clear, red-tinted clear, chrome plate and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Amazingly, there are no obvious tire burns. The instructions are 'excellent' with the typical yellowing as the only flaw, amazing 'excellent++' graded decals and even the original flyer for MPC Dynoracers. This kit must be shipped insured.

Revell Heinkel He-219 A-7 (A-5/A-2 Late) Uhu Owl - Three Eduard PE Sets / Brassin Wheel Set / HGW Seatbelts / Master FuG Radar / Montex Mask / Owl Decals / Barracuda Open Cowel Flap Set / SuperWing Figures / Cast Metal Gear Struts, 1/32, 04666

Plastic Model Kit,   Box Condition: VG

$159   

Build the ultimate He-219 in any scale!! Includes Eduard 32324 Exterior Set, 32325 Undercarriage, 32757 Color Interior Set, Eduard #632016 Brassin Resin Wheel Set, HGW #132510 Seatbelt Set, Master #AM-32-039 FuG 200 Lichenstein SN-2 Radar, Montex Mini-Mast #MM32132, Barracuda Studio #BR32063 Open Cowl Flap Set, cast metal main and nose gear struts, SuperWings pilot and radio operator figures and Owl Decals #OWLD21019 for Maj. Werner Streib. All items are never used and complete. The actual kit is dated 2012 and from all new molds. Features 261 parts with very fine recessed panel lines and excellent detail inside and out. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Aurora North American F-100 Super Sabre, 1/103, 490-50

Plastic Model Kit,   Box Condition: Exc+

$52   

Dated 1961 with the great Jim Cox artwork that makes early Aurora kits so collectible. This issue has a slightly larger box than earlier ones. It is a nicely done kit for that time, molded in gloss silver and clear with full landing gear and clear 'Triangle World Map' stand. Never started. Inventoried complete with all parts, decals and instructions present. Please note, this is not a reissue of the Comet model. Aurora cut these molds years before acquiring Comet's F-100.

Lindberg F-86 Saber Jet Motorized - USAF or Luftwaffe, 1/48, 3110M-150

Plastic Model Kit,   Box Condition: VG

$45   

1969 issue motorized for 'Jet Sound.' Includes electric motor, all metal hardware and wiring as well as the unique sound system. F-86 is quarter scale and from the original 1950s molds but slightly modified for motorizing. Features dual wing mounted drop tanks, 8 wing mounted rockets, pilot figure, full landing gear and a special display stand that hold the batteries. Molded in gloss silver and clear. The kit has never been started. The motor is still in the factory sealed bag. All other parts have been inventoried complete including decals for both air forces and instructions.

Monogram Focke-Wulf FW-190 A-8/R-3 / A-7/R2 / A7/R3 / A-5/U8 / A-8/R1 / A-5/U3 Tropical - Blue Box Issue, 1/48, PA107-100

Plastic Model Kit,   Box Condition: Good

$36   

1967 issue and one of two known Blue Box variations. This kit is from the classic original 'Four Star' molds. Very well molded and can make any of 6 versions listed. Also includes decals for all variants. Features good cockpit detail, pilot figure, optional position canopy and landing gear with a very large variety of underwing stores and gun options. Paint guide for all variants is included. Never started. Complete with all parts, decals and instructions.

Varney US Navy Fleet Submarine - The First Plastic US Ship Model, 1/240

Plastic Model Kit,   Box Condition: Good+

$795   

This model is a landmark in the history of Plastic Kits. The Varney Fleet Sub is the primary candidate for the first all-plastic ship kit made in the USA. The famous HO/O train manufacture, Varney, branched out into other scale model kits at the end of WWII. In late 1945, they introduced what are thought to be the first USA produced plastic model kits - the Fleet Sub and the PT-17 Stearman. Both kits were excellent scale models given the state of modeling at that time. However, Varney was 6 years too early. The Fleet Sub and PT-17 met a cool reception when it was introduced to retailers. Hobby Shops were not sure if it would sell, and did not know how to sell it. Consequently, most retailers would not order it and those who did put them where they were not seen by the public. Distributors stopped carrying the kits due to a lack of re-orders. The result was inevitable - they did not sell, and Varney pulled both kits from production very quickly. Varney was committed to cutting the molds on the LST and it was released in 1946 with the same result. That marked the end of Varney's venture into "non-train" scale plastic models. Varney dedicated all production to HO trains and in the late 1940s they sold the molds for the Fleet Sub, the LST and the PT-17 to O-Lin. The molds underwent modification (the hull was divided into two parts instead of one) and it was released by O-Lin and later Lindberg. This kit is a a very nice, never started and complete example. The box top grades 'good+' and has nice color as shown, general light stains and wear, three solid corners and one closed split corner. Three sides are as nice as the top, with one small piece of clear tape on both long sides. The right short side does have a 3/4" x 1/2" tape tear but is fine beside that . Inside, it is complete. The yellow parts display is intact and in 'good-' condition. The original krinkle small parts bag is present but split open; I have included the bag and all parts are inventoried complete. The original glue is present but the tube shattered; I have put it in a zip lock. The stand was glued to the yellow at the factory; the glue has come off. The factory glass rectangle for the stand arm is still present and in it's holder. The heavy one-piece molded hull is in rare crack-free condition and cradled into the holder. The base is in very good condition also. Very large instruction sheet is 'very good++' and folds out to illustrate construction and offers numerous display ideas for this new medium in hobby kits. Decals were not provided with the kit. This kit was made with gray injection molded details, glass stand arm and black injection molded stand and sub hull. I have seen versions with no paint on the base and hull; however, this one has the base and hull factory painted gray. The paint is in 'very good' condition on the hull and 'excellent' on the stand base. A rare example of a classic kit. Shipped with insurance only.

Aurora Albatross D-3 (Albatros DIII), 1/48, 104-100

Plastic Model Kit,   Box Condition: Sealed Exc+

$45   

Still factory sealed but the seal has a split on both short sides. Box has a 1956 date on it, but this a 1960s issue hardbox. Most likely from 1963+ because of the simplified Aurora logo and $1 price extension on the part number.

Aurora The Moon Bus from 2001 A Space Odyssey, 1/55, 829-250

Plastic Model Kit,   Box Condition: Exc+

$165   

Original 1969 kit from the famous movie. Not the common reproduction. This example is in remarkable condition inside and out. The box top grades 'excellent+' and has like-new color and gloss, four solid corners, no repairs, creases or price tags. It would grade higher but there is impact damage to the lower right corner - which is not visible in the photo. Well detailed kit features full interior with cockpit and removable top. Molded in the correct gray, light green and clear. The kit has never been started. Inside, it is exactly the way it left the factory. The parts that were in factory sealed bags (light green) are still factory sealed. The gray and clear parts were never factory sealed and have been inventoried complete. With 'excellent' decals and instructions.

Fujimi Nissan Fairlady 280ZR Racing Motorized, 1/20, RC6

Plastic Model Kit,   Box Condition: Fair+

$190   

Rare, early Mokei issue. Large scale and very well molded. Designed to be motorized with a RE-14 or similar sized electric motor. Includes all hardware but Fujimi did not furnish the motor with the kit. Features switchable rear wheel drive, steerable front wheels, nicely detailed interior, opening doors, a huge decal sheet with all the colorful stripes and markings of the box art car and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The box is complete but worn and clear tape is holding most corners together.

Airfix Harrier GR-5 - RAF, 1/72, 04038

Plastic Model Kit,   Box Condition: Sealed NM

$24   

Still factory sealed. Dated 1991 and features 102 parts. Very nicely detailed and molded. Features good cockpit, intakes and exhaust detail, optional position landing gear, numerous pylons with weapons loadout and decals with painting guide.

Monogram Ford F-150 Ranger Pickup Truck - (F150), 1/24, 2262

Plastic Model Kit,   Box Condition: Fair

$36   

This kit is dated 1980. Very nicely detailed featuring full engine, excellent engine compartment and opening hood, detailed chassis with two or four wheel drive driveline & differential, opening tail gate, optional bed cover, detailed interior and more. Molded in gloss red, clear and chrome plate with rubber tires. NOTE: this kit has minor and neat assembly. The long block (engine 1/2, intake, heads and exhaust manifolds) are built to 'professional' quality. The two bed inner walls are assembled to 'excellent++' quality. There is no other assembly and zero painting. It has been inventoried complete with all parts and includes decals and instructions. Although the box has bug damage, the decals and instructions are in 'excellent++' condition. Before you use any older kit decals, please read the articles (located on this website) about saving old kit decals.

Monogram Porsche 911 Cabriolet Slant Nose, 1/24, 2788

Plastic Model Kit,   Box Condition: Good

$34   

Dated 1989 and a very nice kit of this classic design Features detailed engine, opening hood, full interior, good underside detail, optional 'up' convertible top or 'down' boot and more. Molded in bright red, clear and chrome with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

SMP 1959 Imperial Hardtop - (Chrysler Imperial 2 Door), 1/25, 139

Plastic Model Kit,   Box Condition: VG+

$129   

Very, very rare original hardbox issue. Nicely molded and features full interior, molded-in underside detail, rubber wide-whitewall tires in 'near mint' condition, the four correct metal axles, four metal screws and numerous chrome parts. This kit has not been started in any way. NOTE: the stock version is 100% complete. All custom parts are missing. Missing custom decals and instructions. This is a very simple kit, you will not need the instructions.

AMT White Freightliner Dual Drive Semi Truck Tractor, 1/25, T568

Plastic Model Kit,   Box Condition: Exc

$95   

Rare first issue from the 1970s; not the modern reissue. Very highly detailed kit with more than 280 parts. Builds a full rolling chassis just like the full-size truck. Features complete engine and engine compartment, detailed cab with complete interior, opening hood, full suspension, underside details and more. Molded in white, clear, red and amber tinted clear, chrome plate and with metal axles, flexible brake lines and rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Aurora Convair VR XFY-1 Pogo, 1/48, 60-98

Plastic Model Kit,   Box Condition: Good-

$119   

First issue from the early 1950s. Rare, big 1/48 scale kit. Please note the early Aurora rectangular logo, which was used from about 1953 to 1955. The kit has never been started. Inventoried 100% complete including 'excellent' condition, flat decals and instructions and even includes the original factory tissue paper. NOTE: although the kit is complete, 1/8 inch (.31cm) of one-half of a tip tank is gone - it either broke off or was short shot.