Ace Model Shop Jeepster, 1/24, 7R
Multimedia Model Kit, Box Condition: Good-
Sold
Hard-to-find kit from 1948. The Ace Products Company was located at 60 N. San Gabriel Blvd, Pasadena 8, California and produced a line of automobiles and perhaps other subjects also. This kit consists of injection molded hard plastic black wheels and tires, metal hubcaps, steering wheel and hardware, clear windshield, cast metal steering wheel, grill decals and pre-cut and stock wooden parts. The majority of the parts, including the body, seats, fenders, etc were profile cut. Includes full size plans with assembly illustrations, detailed (for that time) written instructions and a photo of the completed model. NOTE: the body, body floor and fenders have been professionally built, sanded and primed. quality of the work is amazing, as good as you can do with this kit. As you know, this is the hard part. Finishing it will be very straightforward. There is no other assembly and it has been inventoried complete with all parts and plans/instructions (which are heavily worn but completely usable)
Tamiya Republic P-47D Thunderbolt Razorback With FotoCut PE Details / Loon Models Early P-47D Cowl Flaps / Eduard Mask, 1/48, 61086-2500
Plastic Model Kit, Box Condition: Exc++
Sold
Includes the following aftermarket accessories that are still factory sealed: Fotocut P-47 PE Detail Parts, Loon Models Conversion #LO48207 Early P-47D Cowl Flaps for Razorback and Eduard EX008 P-47D-20 Mask Set. The actual kit is very highly detailed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Lindberg Jurassic Park Velociraptor 'Raptor', 70272
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. 1993 issue released with the popular movie. The scale is not listed but the kit is over 15 inches long and over 6 inches high. There were four very nice dinosaur models issued in this series.
Monogram 1948 Ford Convertible Pro Modeler - Stock or Street Rod, 1/24, 85-5952
Plastic Model Kit, Box Condition: Sealed VG+
Sold
Still factory sealed. Dated 1998 and part of the superb Pro Modeler series. Features full engine and compartment, opening hood, detailed underside, full interior, optional up or down convertible top and all parts for either factory or custom versions. Molded in white, clear, red-tinted clear, chrome and with white wall tires and decals.
Tamiya Honda Ballade Sports CR-X1.5i - (Honda CRX), 1/24, 2440A
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Features complete interior and underside detailing, working sunroof, optional spoiler and more.
Revell Mickey Thompson's Challenger I and Tommy Ivo Showboat Four Engine Dragster, 1/25, 7501
Plastic Model Kit, Box Condition: Good-
Sold
1987 issue features both kits from the original 1960s molds. The Challenger I was originally released in 1962 and it was a revolutionary kit that broke new ground in 1/25 level of detail. In Tom Graham's interviews with Jim Keeler, the kit designer, the molds cost $80,000 in 1961 - twice that of a normal car kit. To design the kit, Thompson's mechanics gave the Revell team full run of the vehicle and even disassembled it for them. The kit features removable boy panels, four super detailed Pontiac V-8 engines with 18 parts each, complete chassis, suspension and drive train detail, water tanks, fuel tanks, parachute holder, cockpit and much more. The level of detail is astounding. Molded in correct baby blue, chrome plated and with rubber tires. The Showboat certainly fit the name - it had four Buick Nailhead engines with individual gear boxes. That kit is very well detailed as well. Both are never started. All the colored parts are still factory sealed in the bag. The few parts not sealed have been inventoried complete. With decals and instructions.
R&L Royal Coach of England 1762 - Bagged, 1/136
Plastic Model Kit, Box Condition: No Box
Sold
Still factory sealed. Very well detailed small scale coach with rotating wheels. Small scale model from R&L in Australia. R&L marketed these kits independently but some were also sold by Minicraft/Hasegawa, Academy, as the Aurora 'Snaparoos' and in Kellogg's Cereal as premiums.
R&L Timber Transporter - Bagged, 1/130
Plastic Model Kit, Box Condition: No Box
Sold
Still factory sealed. Very well detailed small scale vehicle molded in two color and with rotating wheels. Small scale model from R&L in Australia. R&L marketed these kits independently but some were also sold by Minicraft/Hasegawa, Academy, as the Aurora 'Snaparoos' and in Kellogg's Cereal as premiums.
R&L BAC-Sud Concorde SST - Bagged, 1/750
Plastic Model Kit, Box Condition: No Box
Sold
Still factory sealed. Roughly 3.25 inches long when assembled. Small scale model from R&L in Australia. R&L marketed these kits independently but they were also sold by Minicraft/Hasegawa, Academy, as the Aurora 'Snaparoos' and in Kellogg's Cereal as premiums. Very well detailed and molded. Includes full landing gear and cabin window detail.
Planet Models Soviet Autogiro Ts AGI A-7, 1/72, 062
Resin Model Kit, Box Condition: VG++
Sold
Very highly detailed resin cast kit with clear canopy. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The A-7 was a ground-breaking autogyro first flown in September of 1934. The craft had an active career in WWII for reconnaissance missions and taking part in the 1938-1940 Tian-Shan expedition.
Trumpeter North American F-107A Ultra Sabre, 1/72, 01605
Plastic Model Kit, Box Condition: VG++
Sold
Excellent quality and features recessed panel lines, good cockpit detail, optional position canopy, optional position speed brakes and wing flaps, optional position elevators, drop tank, gear well detail and markings for three F-107A, including a NASA test aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
ESCI F-15 Eagle Satellite Killer with ASAT Missile - 318th FIS USAF, 1/72, 9049
Plastic Model Kit, Box Condition: Exc+
Sold
Well molded kit with all recessed panel line detail, full cockpit, optional position air brakes, extensive decal sheet and ASAT missile. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Convair 990 Coronado Luxury Jet Airliner Swissair, 1/135, H254-129
Plastic Model Kit, Box Condition: Good++
Sold
Rare hardbox first issue dated 1961. Very nice kit of the fantastic Mach .91 airliner from the early 1960s. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. It is interesting to note that Revell still included the 'S' clear swivel stand with this kit in 1961. Use of this stand had long been discontinued in the reissued 'S' kits. The Convair 990 and its near sister 880 were very high performance airliners. Unfortunately they did not find favor with commercial operators. The commercial failure of the 990 caused Revell (and Aurora) to pull these molds from production shortly after the introduction of the kit. The 990 was a larger and faster (Mach .91) airliner than the 880, but it failed to meet it's range criteria for east to west crossings of the USA. As a result, only 37 were made. Interestingly enough, several 990s continued to be operated by private owners and NASA operated two for decades after the last one was phased out of commercial service. Only 65 880s were produced from 1959 to 1962. The aircraft was designed to be smaller and faster than the DC-8 and 707 - this market did not develop, however, and if it did it could have been served with less expensive designs.
Ideal Aeroplane & Supply Revenue Cutter - 12 Inches Long, 1110
Wood Model Kit, Box Condition: Good-
Sold
The plans are dated 1938. This kit is part of Ideal's famous '12 Inch' series of ship models with the composition molded hull. This eliminated all the work of forming the hull from a block of wood. This hull is in 'near mint' condition with no warping and no damaged, just a few tiny edge chips at the top hull line. Also includes two sheets of printwood parts, bamboo strips, wooden dowels, full plans/instructions which include rigging details. The kit has never been started. It has been inventoried complete with all parts and includes the plans/instructions. The box is generally very nice but is missing the large flap on the left side. The parts are still wrapped in the plans exactly as they left the factory; the plans do have a little wear, mainly in the corners and are in 'very good' condition.
Ideal Aeroplane & Supply Great Republic Clipper - 12 inch Long Wooden Model Kit
Wood Model Kit, Box Condition: Good++
Sold
From 1938. One in a series of the popular Ideal 'One Foot' series of ship models. This kit features Ideal's 'Moulded Hull' to take much of the difficult work out of building a wooden ship kit. The hull is completely formed of a wood composite and is in excellent 'as new' condition. The kit also includes printwood, fibre printed parts, wood stock and bamboo as required. Has a sealed envelope of CASCO glue, full size plans with rigging diagram, color information and building instructions. Inside, the kit is like new and complete. It has not been started and the parts are still wrapped in the factory packing paper.
Ideal Aeroplane & Supply The Golden Hind - Flagship of Sir Francis Drake - 18 Inch Long Wooden Ship Mode
Wood and Metal Model Kit, Box Condition: Fair+
Sold
Rare kit from 1950. Measures 18 inches LOA when assembled. Includes solid precarved balsa hull, seven sheets of cleanly done printwood, other precarved and shaped wooden parts, dozens of cast metal fittings, wood stock and masts/yards in many sizes, running and standing rigging material, sail material, full color insignia and more. Features excellent full size plans and instructions. The plans show numerous sectional and detail view of the ship and a painting guide. There is a separate instruction sheet, which was unusual for Ideal. NOTE: the main deck has been neatly cut from it's printwood sheet. Quality of the cut is excellent. There are no other removed parts and no gluing. One side elevation has been adult colored to illustrate the correct color scheme. Quality of the coloring is excellent. Inventoried complete with all parts, plans and instructions. One short end panel is missing on the box.
Ideal Aeroplane & Supply Great Republic - 12 inch Long Wooden Model Kit, 1101
Wood Model Kit, Box Condition: VG++
Sold
Rare ship model dated 1938, but I believe it is from the 1940s due to the box design. Contains the Ideal 'Premolded Hull' which is a completely formed, hollow hull made from a wood composite. The hull is in excellent condition. Also includes full size plans/instructions with rigging diagram and paint color information, wood masts as required and two sheets of printwood. The kit has never been started. Inventoried complete with all parts and plans.
Revell Great Eastern - First of the Great Steamships, 1/388, H393-500
Plastic Model Kit, Box Condition: VG+
Sold
Very rare kit of this historic ship. Early USA 1963 issue hardbox in very good condition that includes framable John Steel boxart. The model measures 22.25 inches long when built. Very nicely detailed for that time. Never started. Inventoried and NOTE: missing the prop shaft. Easily made; it does not show. The model can even be built without it by gluing the prop to the hull. Otherwise complete with all other parts, rat lines, vacfuform sails (in near mint condition) and instructions. The Great Eastern (originally Leviathan) was the work of English Designer I.K. Brunel. In the 1850s there was a need for large ocean liners to carry the immigrant trade, but none existed. Shipping companies also wanted the interiors of ocean liners to look like hotels, but there simply no space. This ship was to solve that problem. She was launched in 1857 and five times bigger than any other ship of the day! The 22,500 ton Great Eastern was 693 feet long and carried 4000 passenger. Unfortunately, her career was one mishap after another until she found fame by laying the trans-Atlantic cable.
Matchbox Supermarine Stranraer, 1/72, PK-601
Plastic Model Kit, Box Condition: Good-
Sold
SALE!! Dated 1978. Very nicely done model of this 1930's flying boat. Never started. Inventoried 100% complete with all parts, decals and instructions. The Stranraer was one of several successful flying boats designed by RJ Mitchell for the RAF. Experience gained with the Southampton and Scapa flying boats was put to good use in design of the Stranraer which featured an all metal structure. Although replaced operationally with the Sunderland, examples of this aircraft were used till 1942 in WWII and many flew long after the war was over.
Monogram Grumman F-14A Tomcat, 1/72, 1132
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. 1988 Snap-Tite release. Nicely molded and detailed for a snap model. Features a crew of two, wings that swing, decals for the box art aircraft and a very nice display stand.