Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Heller Boeing C-135 FR Tanker, 1/72, 80384

Plastic Model Kit,   Box Condition: Good+

Sold   

Very large and well detailed 1/72 scale kit. Features 145 parts, very good engine detail, detailed cockpit and full interior, detailed gear wells, rear 'flying boom' refuel port and two wing tip refuel ports, optional position cargo door, optional position crew door and boarding stair, full paint guide and a large and extensive decal sheet for 93-CN or 93CF. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Heller Smit Rotterdam/London Tugboat, 1/200, 80620

Plastic Model Kit,   Box Condition: VG+

Sold   

Large scale well detailed sea-going tug kit. Very nicely detailed full hull kit. Never started. Factory sealed internal parts bag with decals and instructions.

Aurora Lockheed F-90 Fighter, 1/48, 33-130

Plastic Model Kit,   Box Condition: Exc++

Sold   

SALE! Hardbox is dated 1958, but the logo tells us that this is an early 1960s issue since the 'Famous Fighters' is not present in the oval logo but the sunburst still is. This issue has the correct triangle two-piece clear base as well as full landing gear and rockets. Molded in silver and clear. Inventoried 100% complete with all parts decals and instructions. This is reissue of one of Aurora's first two kits (F-90 and F9F) which were copies of the Hawk molds.

Hasegawa McDonnell Douglas OA-4M Skyhawk - US Marines H & MS-12 Outlaws (markings for two different aircraft), 1/32, CH6

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare limited edition large scale OH-4. Features detailed cockpits and gear wells, many photoetched parts, numerous cast metal details, rubber tires, optional position canopy, leading edge slats and speed brakes and a painting guide and decals for two Marine aircraft. The kit has never been started. Some parts are still in the factory sealed bags - all the small parts trees, clear parts, cast metal, tires and PE fret. The parts that are not internally sealed (wings and fuselage trees) have been inventoried complete, including decals and instructions. Please note that the box has water damage on one side, but the decals and instructions are in 'new' condition.

SMP 1960 Chevrolet Apache Pickup Truck with Trailer / Display Stand - Stock or Custom or Texaco Service Station Truck, 1/25, 200

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare kit from 1960. Has not been reissued. A very nice kit for that time which includes a four-wheel trailer with loading ramps and tow bar. The trailer can also be built as a show display stand. The truck features a detailed engine and engine compartment, opening hood, full interior and whitewall tires. Also includes a large number of custom parts so you can make it any way you would like, including a gas station service pickup truck. Molded in ivory, chrome plate, clear and with white-wall rubber tires. The kit has not been started. The trailer is still factory sealed. NOTE: the truck is missing the two front parking lights. Inventoried with all other parts, decals and instructions.

Revival Ferrari 156 - 1961 World Champion Le Grand Prix, 1/20, 90101

Metal Model Kit,   Box Condition: Exc++

Sold   

Very nicely detailed kit. Features factory painted red metal body, metal tubular chassis, true scale real metal wire wheels, metal engine, numerous injection molded details, detailed motor with ignition wiring, flexible brake lines, metal carb intakes (horns) and much more. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

Fujimi IJN Ryujyo Aircraft Carrier, 1/700, WLA082-700

Plastic Model Kit,   Box Condition: VG-

Sold   

1/700 scale waterline kit with airwing. Very highly detailed and finely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Entex 1907 Itala Pechino ParigiItala The 1st Dune Buggy - Winner of the Great Peking-Paris Auto Race, 1/20, 8212

Plastic Model Kit,   Box Condition: VG+

Sold   

Excellent model from the 1980s. Very highly detailed with full suspension and exhaust, working steering, complete interior and much more. Molded in medium gray, tan, black, chrome plate, brass plate, flexible belts for the hood and rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: one spare tire (there are two) has a different tread and may be from another kit. It is the right size however and should work fine. The Peking to Paris race is perhaps the greatest automobile race of all time - and excellent history of it is contained with the instructions.

Entex Steam Tractor (Traction Engine) Pendle Princess - (ex-Bandai), 1/16, 9145

Plastic Model Kit,   Box Condition: VG+

Sold   

Very large and highly detailed kit from ex-Bandai molds. This model is an exact copy of the Richard Garrett and Sons Ltd Pendel Princess, which survived the steam era to become a museum display. The original was built in 1919 and was 7 tons. It produced 4 horsepower and reached about 6 mph. Molded in white, brown, red, yellow, gold plate, black, clear, clear tinted in red, light blue and green, and with real rubber tires, rubber tubing and several metal parts. Includes full pinstripe decals. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (the two yellow parts trees) have been inventoried complete including decals and instructions.

Pyro 1909 Lozier Briarcliff - Brass Car Series, 1/32, C455-125

Plastic Model Kit,   Box Condition: Good

Sold   

1967 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Lozier was a large four cylinder T-Head rated at 45 horsepower. The wheelbase was 124 inches and she road on huge 36 x 4.5 tires. This Pyro car model is based on a car that was owned by Thomas J Lester of Chargin Falls, Ohio that Pyro engineers and designers had access to. The model includes rubber tires, brass plated parts, colored injection molded parts and clear parts. Features detailed chassis, complete motor and interior and a removable hood or 'bonnet'. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including instructions.

Airfix Dennis Fire Engine and 1910 B Type Bus Old Bill, 1/32, 09441

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Includes both models. The bus has 150 parts, and the fire engine has 144. Each kit is 1/32 scale and is highly detailed.

Entex 1913 Ford Model T Delivery Van - with Real Wood Parts Coca Cola / Templeton & Sons Taxidermists / The Texas Company (Texaco) / Carnation Milk, 1/16, 8497

Multimedia Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed but the seal has split on the right side. Very highly detailed and well molded kit from the 1970s. Builds up a rolling chassis just like the real vehicle. Features detailed engine with ignition wiring, full engine compartment with hoses and wiring, removable hood, full suspension, driveline and exhaust detail, steerable wheels, complete interior (down to the speedometer cable and individual clutch, brake and accelerator pedals and levers, a large sheet of micro wood trim so that the wooden parts of the kit can be accurately represented with in-scale wood grain, opening rear cargo doors, full van interior, opening passenger and driver doors, flexible fuel lines, headlight wiring, choice of decals and much more. Molded in gloss black, gloss ivory, brass plate, wood tan, wood tan, cast iron and with real rubber tires, rubber wires and cables, small metal parts and details and a sheet of precut in-scale grain wood.

Pyro 1911 Stevens-Duryea Tourer, 1/32, C453-125

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed but has paint over-spray on the factory seal at the right and right side panel. 1967 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box - in this case the exact car was on display at the Auto Aviation Museum under the directorship of Mrs. Philip L. Sommerlad of the Western Reserve Historical Society, Cleveland, OH. The model includes rubber tires, brass plated parts, colored injection molded parts and clear parts. Features detailed chassis, complete motor and interior and a removable hood or 'bonnet'.

Hasegawa Mitsubishi J8M1 Shusui, 1/72, NC1

Plastic Model Kit,   Box Condition: Exc++

Sold   

From 1995. Superbly molded and nicely detailed. Features good cockpit detail, pilot, optional landing skid or wheels, optional tail whees (in flight and on ground style) and a special in-flight display stand. Includes paint guide and markings for two aircraft: prototype and production.

Condor Heinkel He-178 V1 - The First Jet Aircraft, 1/72, C72003

Plastic Model Kit,   Box Condition: VG

Sold   

The He-178 was the world's first aircraft to fly under jet power. The first practical jet engine, invented by Dr. Hans J. Pabst von Ohain, was running in September of 1937. The engine, the HE S1, was fueled with hydrogen and no had throttle control but produced 250 kg of thrust. Von Ohain began work on the He S2B which ran on gasoline and had throttle control. At the same time, Heinkel engineers began design of the worlds first jet airplane, the He-178. The airplane was single-engined with a flush riveted metal monocoque fuselage, wooden wings and retractable gear. Trials with the S3b engine in the airframe began on August 24th, 1939 and on August 27th, the airplane made the first jet flight. It made 12 flights in all before being retired to the Berlin Air Museum where it was destroyed in a bombing raid in 1943. Well molded kit with fine recessed panel lines, photoetched details, film instruments and injection molded canopy. Never started. Factory sealed bag with instructions. Please note that Condor did not issue this model with decals.

LS KI-67 Yasukuni Torpedo Bomber - Motorized- 7th Group / 98th Group / 762nd Group, 1/72, 152-450

Plastic Model Kit,   Box Condition: VG++

Sold   

SALE! Very high quality kit with legendary LS attention to detail. The kit is engineered for two electric motors - LS did not issue the kit with the motors. The batteries are held in a very clever 1/72 scale fuel truck. Features all fine recessed panel lines, excellent cockpit and crew station detail with crew, rotating turret with elevating gun, torpedo load with ground torpedo trolley, working bomb bay doors, working crew entry door, moving wing flaps and ailerons, rotating wheels and propellers, ground crew, wheel chocks and more. Includes beautiful full color painting guide, color cut away for more interior detail and decals for multiple aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Some of the LS molds are still in use by Hasegawa as testament to the their detail and accuracy.

Aurora Douglas DC-8 Jetliner - TCA (Trans-Canada Air Lines), 1/103, 390-249

Plastic Model Kit,   Box Condition: Good+

Sold   

1960 USA (West Hempstead, NY) issue of this rare kit. The Canadian issue from Aurora Plastics of Canada, Ltd. came after this in 1964. Large and nicely done for the time, very near 1/100 scale kit with full landing gear detail. Molded in white and clear and with the classic large clear Aurora 'World Triangle' base. This kit comes with a large sheet of classic TCA markings like the box art for CF-TJA 801 which includes all TCA and DC-8 logos, stripes, windows, registration and more. NOTE: the wing and elevators halves have been neatly assembled. Quality of assembly is professional. There is no other assembly and zero painting. Inventoried complete with all parts and decals. NOTE: missing instructions but this is a very simple kit with few parts.

Monogram C-121C (L1049) - MATS Super-G Constellation, 1/131, 7591

Plastic Model Kit,   Box Condition: VG

Sold   

1975 issue. This is the original TWA Connie kit from 1957 with MATS markings. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Monogram Apollo Command Module, 1/32, 5902

Plastic Model Kit,   Box Condition: Sealed

Sold   

Large scale (1/32) kit with renown Monogram quality. Young Astronauts edition with clear panels to show extensive interior details. Never started. Factory sealed bag or 100% inventoried with all parts/decals and instructions present.

Monogram Orient Express Hypersonic Airliner, 1/200, 1130

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still has factory seal. Dated 1988 and includes display stand.