Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Eagles Talon Bell L-39 (Swept Wing P-39), 1/72, ET-505

Resin Model Kit

Sold   

Rare. Very finely cast resin kit with recessed panel lines and a vacuform canopy. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including instructions.

Airmodel Curtiss XF15C-1 (XF-15C-1) - Bagged, 1/72, 174

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory bag sealed. Nicely molded with recessed panel lines. Typical basic vac kit. Scratchbuilding some details will be necessary. In the early 1940s turbojets had little thrust advantage over piston engine aircraft and a shorter range. It was no surprise that there were several mixed engine (piston and jet) designed tested and some reached operational status. The Curtiss XF15C-1 was to be a long ranged composite powered fighter. The Pratt and Whitney R-2800-34W drove a four bladed prop and the jet was a Allison Chalmers built version of the DeHavilland/Halford H-1 turbojet. Three prototypes were built and tested. The craft had a speed of 450 mph and a range of 1,250 miles. However, the rapid progress of turbojets made the concept obsolete. Trials continued but the aircraft were eventually scrapped.

Pyro Chevrolet 1957 Bel-Air Two Door Hardtop, 1/32, C294-50

Plastic Model Kit,   Box Condition: Good+

Sold   

Late 1960s Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. In the late 1960s the '57 Chevy had passed it's popularity. But Pyro designers in the late 1960s had the forethought to recognize the '57 Chevy for the classic that it was. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Molded in bright gloss red and clear, with detailed molded chassis with separate front and rear suspension parts, complete interior and more. This model is nicely detailed and the box states that it can be converted to a 'road racing' or slot car. The kit has never been started. Inventoried 100% complete with all parts and instructions.

Hudson Miniatures 1910 Ford Model T Torpedo Convertible, 1/16

Wood and Plastic Model Kit,   Box Condition: VG+

Sold   

Early multi-media kit of wood, metal and plastic dated 1949 on the box. Large 1/16 scale kit measures 8 inches long when built. Very nicely detailed with all the complicated parts cast in yellow, light tan or ivory injection molded plastic. Includes full size plans and instructions. This kit has never been started. The small parts are still factory bag sealed, and all other have been inventoried 100% complete with full-size plans and instructions. Hudson Miniatures created a very successful and popular line of automobile kits in a constant 1/16 scale shortly after WWII. The kits sold very well until the appearance of the much smaller and less scale Gowland/Revell 'Highway Pioneers' in 1951. When the all-injection molded Gowland kits proved that they were not a passing fad, Hudson quickly planned and released his own small scale competition for them called 'Lil' Old Timers Quickie Kits'. The kits were of excellent quality, but it was too little too late. Sales of wooden kits faltered in the next few years with the introduction of all-plastic injection molded cars in the mid 1950s. This forced Hudson to discontinue both lines. Today, these excellent kits are often the only large-scale models available of these early automobiles.

Pyro Bentley Competition Speed Six, 1/32, C323-60

Plastic Model Kit,   Box Condition: Exc

Sold   

1960s Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box. The Bentely Speed Six did more than any other model to promote Bentley's performance and status. Factory raced versions won the 24 Hours at Le Mans and Brooklands. The model includes colored and clear injection molded parts, wire wheels, detailed chassis with separated molded underpan and exhaust and complete interior. Ideal for slot car conversion. Never started. Factory sealed bag or inventoried 100% complete with all parts and instructions.

Pyro 1931 Cadillac Sport Phaeton V-16, 1/32, C344-79

Plastic Model Kit,   Box Condition: NM

Sold   

1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Features detailed chassis, complete motor and interior, spoked wheels and a removable hood. Molded in green and clear with chrome plated parts. The kit has never been started. Inventoried 100% complete including decals and instructions.

Pyro 1932 Pierce Arrow Phaeton, 1/32, C339-79

Plastic Model Kit,   Box Condition: Exc+++

Sold   

1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. The model includes spoked wheels, chrome plated parts, colored injection molded parts and clear parts. Features detailed chassis, driveline and suspension, complete motor and interior and a removable hood. The kit has never been started. Inventoried 100% complete including instructions.

Revell Ferrari Koenig Twin Turbo Testarossa, 1/16, 7511

Plastic Model Kit,   Box Condition: VG

Sold   

Large and nicely detailed 1/16 scale kit. Features very nicely detailed engine, ignition wiring, optional engine stand, full exhaust and suspension, full interior, seats the fold forward, opening doors, opening hood and trunk and more. Molded in bright red, clear, black, silver, satin chrome and with rubber tires and metal springs, shafts and wire. The kit has never been started. Internal factory sealed bags including decals and instructions.

Nitto Boeing 767 United Airlines, 1/100, 13018-3200

Plastic Model Kit,   Box Condition: VG++

Sold   

Hard to find. Largest and most detailed 767 kit made. Large colorful United decal sheet. The kit has never been started. Internal factory sealed bags including decals and instructions.

Monogram US Lee Tank M3 USA - Soviet and British Versions, 1/32, 6502

Plastic Model Kit,   Box Condition: Sealed Exc+++

Sold   

1983 issue. Still factory sealed. Rare large 1/32 scale armor kit. Has decals for all three versions. Bogey system and flexible track assemblies are movable, guns move and turret rotates. Includes two crewmembers, extra track links, packs and tools.

Revell 1869 45 Caliber Pepperbox Six-Barrel Revolving Pistol - Pre S Kit, 1/1, H600-98

Plastic Model Kit,   Box Condition: Exc+

Sold   

Hard to find Pre-'S' kit from 1954. Very nicely molded in light tan, brown swirl woodgrain and gold. Inside, the kit is as new. It has never been started, and the parts are still factory sealed in the 'crinkle' bag. Complete with instructions in excellent condition.

Revell USS John Paul Jones DD-932 (Forrest Sherman Class), 1/320, H309

Plastic Model Kit,   Box Condition: Exc+

Sold   

Very nicely detailed kit from 1971. Measures over 15 inches long when assembled. Features rotating turrets, elevating guns, torpedo tubes, radar, decals and flag sheet. The model has not been started. Factory sealed inner bag with decals and instructions.

Revell 1967 Dodge Coronet R/T Stock or Custom, 1/24, 85-2017

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Includes stock or custom parts. Still factory sealed.

Jo-Han Plymouth Sox & Martin Superbird, 1/25, C-1770

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. This is a later issue as it has a UPC code on one side of the box.

Heller Royal Louis with Sails, 1/200, 892

Plastic Model Kit,   Box Condition: Fair+

Sold   

Large and very well detailed model. Includes vac billowing sails and full rigging instructions. Never started. Factory sealed bag or inventoried 100% complete with all parts and instructions.

Revell Messerschmitt Bf-109G Gustav, 1/32, H279

Plastic Model Kit,   Box Condition: VG++

Sold   

1969 release in big 1/32 scale. Has plenty of action features- fully detailed engine, removable panels, full cockpit, moving control surfaces, rotating wheels and props and retracting/extending landing gear. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

MPC Shuttle Tydirium - Star Wars - Return of the Jedi, 1/89, 1-1920

Plastic Model Kit,   Box Condition: Fair++

Sold   

1983 issue. Large kit has a 20 inch wingspan when assembled. Features folding wings, extending ramp, two pilots, Darth Vader and display stand. The kit has never been started. Inventoried 100% complete including instructions.

Pyro Russian Missile Tracking Fishing Trawler (Spy Ship), 1/96, C247-398

Plastic Model Kit,   Box Condition: VG++

Sold   

Dramatic and colorful artwork by AJ Rudisill of the 'trawler' monitoring Polaris SLBM test launches while a SSBN lurks off the starboard side. In the early 1960s the appearance of the Russian 'Fishing Fleet' loaded with sensors to track US Missile tests or fleet communications prompted the Pyro company to issue this kit with a 'Communist Red' molded hull, tan decks and black fittings. Large scale and well detailed. Measures 17 inches long when assembled. The kit has never been started. Internal factory sealed bags including instructions. Pyro did not include decals with this kit.

Hawk Chrome Plated Lockheed U-2 (Authenti-Plate), 1/48, 300-300

Plastic Model Kit,   Box Condition: Good

Sold   

Rare 1962 hardbox kit with Bill Campbell artwork. Large scale with 20 inch wingspan. Completely chrome plated. The chrome is above average but does have some wear. NOTE: the chrome was scraped off where the wing would join the fuselage, evidently in preparation for building. However, no parts have been glued or painted. Inventoried 100% complete with all parts, decals and instructions.

Hasegawa Hawker Siddeley Harrier GR Mk.1 - XV738 or XV739, 1/72, JS028-130

Plastic Model Kit,   Box Condition: Good+

Sold   

Very well detailed model with fine raised panel detail. Includes decals for two aircraft, positionable exhaust ports and iron bomb/Aden Gun Pod/rocket launcher and drop tank underwing stores. This kit has not been started. The parts are either still in the factory sealed bag or inventoried 100% complete with all parts, decals and instructions. NOTE: decals are flaking.