Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Monogram F4U-4 Corsair Four Star Issue - (F4U4), 1/48, 85-0082

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1999 reissue of the original 1963 Four Star kit. 'Working Action Model' with many features; wings fold, landing gear and tail wheel retract and all gear doors close, working arresting gear and rotating wheels and prop.

Revell F-111A Aardvark, 1/72, 4458

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 1987 issue from Revell USA. Features wings that swing, detailed cockpit and landing gear, crew of two and USAF markings.

Lindberg F-86D Sabre Jet Fighter, 1/48, 70503

Plastic Model Kit,   Box Condition: Good+

Sold   

1990 issue from the original 1950s molds. A nice kit for that time, it features fine raised rivet and panel line detail, pilot figure, retracted or extended rocket bay, full landing gear, drop tanks, rockets and decals for the box top photo aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Don Garlits Big Daddy '74 AA/FD Fuel Dragster, 1/16, 7472

Plastic Model Kit,   Box Condition: Sealed Good

Sold   

Still factory sealed. Rare, large scale kit dated 1987. Very highly detailed with supercharged Dodge 26 Hemi motor, flexible fuel lines, oil lines and ignition wires, full tubular frame, removable body panels, hollow rubber Goodyear slicks, solid rubber Goodyear cycle tires, complete air-lock supercharger with movable injector scoop butterflies, rubber blower belt, turnable front wheels, drag chute pack, rear wing and more.

Space Models Klaatu's Spaceship from The Day the Earth Stood Still (1951) - Bagged

Vacuform Model Kit,   Box Condition: Sealed Good

Sold   

Still factory sealed. Vacuform kit with instructions.

IMEX Thunderbirds The Mole - 'For Eternal Preservation', 1214

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Trademarked 1995. No scale given but the built model is 151 mm in length and 68mm high.

Revell Concorde SST - Air France or British Airways, 1/144, 04257

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Very nicely molded kit from 1993. Includes a large, well detailed decal sheet for both airlines.

Aurora TFX F-111B Navy Fighter Bomber (Navy F-111 Prototype), 1/48, 369-249

Plastic Model Kit,   Box Condition: Exc

Sold   

Dated 1966. The only 1/48 scale kit of this subject. The TFX Project was proposed as a way to save money by having the Air Force and Navy use the same aircraft. The F-111B was tested by the Navy but canceled due to the large size of the aircraft. Good kit for that time with swing wings and retractable landing gear. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

MPC Wilhelms' Wonder 'The Wild Dream' - Joe Wilhelm's Award Winning Show Car, 1/25, 600-170

Plastic Model Kit,   Box Condition: VG++

Sold   

Very rare in this condition. Early logo MPC kit, probably from about 1965/66. This is an excellent kit of this classic rod that used to make the custom car show scene in over 50 major US cities. An excellent kit for that time, featuring a fully detailed engine, opening hood, rolling chassis build just like the real car, full interior, , chrome plated custom display 'mirror' stand that holds the car up in the air so you can see the bottom reflected on the base and more. Molded in white, beautiful condition chrome plate, clear, red-tinted clear and with rubber tires. Even the paint brush, factory paint and the small flyer about this car is included. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The chrome and clear that were never factory sealed have been inventoried complete including instructions.

Revell Outlaw - Ed 'Big Daddy' Roth's 'Jewel' Show Car, 1/25, H1282-198

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare first issue hardbox dated 1962. Not the common reissue. Revell pulled out all the stops on this kit. The result was a masterpiece but with incredible tooling costs. Features detailed custom engine, rolling chassis build just like the real rod, full suspension and exhaust, full interior, chrome spoke wheels, show stanchions, trophy, plaque and Roth decals. Molded in the correct white, red-tinted clear, clear windshield material, chrome plate, and rubber tires with the correct rear whitewalls and front blackwall 'bicycle' tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

MPC Magnum GT II, 1/25, 503-200

Plastic Model Kit,   Box Condition: VG

Sold   

One and only issue from 1967. Can be built as a single cockpit competition car with fairing or a 2+2 full bubble custom car. Features detailed engine, detailed engine compartment with horns, radiator, battery and more, opening hood, molded in underside chassis detail with separately molded exhaust and rear suspension, choice of tires, full interior, clear bubble cockpit covers and more. Molded in white, clear, red-tint clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (chrome and clear) have been inventoried complete including instructions. Chrome and clear parts are in excellent condition.

Revell Geopotes 14 Trailing Suction Hopper Dredger, 1/300, 5222

Plastic Model Kit,   Box Condition: VG+

Sold   

1985 issue. Well detailed kit of an usual subject. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

DML Bachem Ba-349A Natter, 1/48, 5525

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Very nicely molded and detailed with recessed panel lines, removable tail, detailed engine and mechanic figure.

Enterprise Cycle Miniatures Old High Wheeler Bicycle, 1/15, B1

Plastic Model Kit,   Box Condition: Exc

Sold   

Very rare. Enterprise was a very successful maker of balsa wood free-flight and control line aircraft models dating well back into the 1930s. In the early 1950s modeling started to change and the Gowland/Revell 'Highway Pioneers' got the attention of Enterprise staff. Enterprise maintained it's own museum of rare and extraordinary old time bicycles, so it only seemed natural that the first (and only) two plastic kits from the company would represent bikes. This model is of the High Wheeler, based on the 'Columbia' of 1979 and is very nicely molded and detailed for the time. It includes a display base also. This model and a 'Tandem' were issued in 1954 but did not sell well; production was discontinued after a short run. The kit has never been started. All parts are still sealed in the 'krinkle' bag. The instructions are mint and contain and excellent 'History of the Bicycle' on one side and detailed, illustrated assembly instructions on the other side.

Revell 1969 Dodge Charger R/T, 1/25, 85-2546

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires.

Academy Spitfire FR.MK.XIVe - (Spitfire XIVe), 1/48, 2161

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed but the seal has drawn the box top concave. Nicely molded with all fine recessed panel lines. Well detailed with complete cockpit, optional position canopy and cockpit entry door, detailed cannon bays with optional position covers, detailed gear wells, weighted tires, fuel tank and more.

Revell Mickey Thompson's Challenger I World's Fastest Car 406.6 MPH, 1/25, H1281-198

Plastic Model Kit,   Box Condition: Good

Sold   

Original issue hardbox dated 1962. Not the common reissue. When released that year, it was a revolutionary kit that broke new ground in 1/25 level of detail. In Tom Graham's interviews with Jim Keeler, the kit designer, the molds cost $80,000 in 1961 - twice that of a normal car kit. To design the kit, Thompson's mechanics gave the Revell team full run of the vehicle and even disassembled it for them. The kit features removable boy panels, four super detailed Pontiac V-8 engines with 18 parts each, complete chassis, suspension and drive train detail, water tanks, fuel tanks, parachute holder, cockpit and much more. The level of detail is astounding. Molded in correct gloss baby blue, silver, chrome plated and with rubber tires. NOTE: this kit has minor and very neat assembly. The engine blocks/heads/intake manifold/fuel pumps have been assembled. The transmission halves/bellhousing/tranny mounts are also assembled. Quality of assembly ranges from 'professional' to 'excellent++' with no gaps, perfect alignment and no to very little glue showing. There is no other assembly and zero painting. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Strombecker Martin M-130 China Clipper, 1/130, D31-89

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare original issue from the 1950s with Pan Am decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: decals have micro age cracks; please read the article (on this website) about saving old decals.

Monogram Grumman F6F-5 Hellcat - Confederate Air Force Issue, 1/48, 5211

Plastic Model Kit,   Box Condition: Good

Sold   

From 1988 with the parts molded in glossy dark blue and black; the decals are for the Confederate Air Force. Kit features folding wings, retractable landing gear, pilot figure and rotating prop and wheels. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Suydam Union Ice Company With Cooling Tower and Icing Platform - Craftsman Kit, HO, 566

Wood Model Kit,   Box Condition: Good+

Sold   

Very well detailed. This is the deluxe, complete issue with all three kits included - the main factory, cooling tower and icing platform. The majority of the parts are wood stock cut to length, carved wood cut to shape and precolored, completely die-cut very heavy cardstock that is as thick as injection molded plastic parts. In addition there are metal ladders, clear windows with printed mullion detail, signs, etc. The kit has never been started. One bag of pre-cut wood parts is still factory sealed; another bag with the signs, windows, etc is still factory sealed; all the factory cut-to-length stock is still in the factory rubber bands; the '300 lb ice cakes' are still in the factory sealed bag; none of the die-cut stock parts have been removed, so they are in mint condition. That leaves just one wooden parts bag - it has been opened. It appears to be complete as best I can tell; however, it was impossible to inventory it properly since all the other bags of small wood parts are still sealed. So something may be missing from this one bag; the good news is that it is made from wood and can be easily made from the instructions. Includes three sheets of instructions.